J1939 · Aftertreatment - DPF
SPN 3251 FMI 10
DPF differential pressure abnormal rate of change
What does SPN 3251 FMI 10 mean?
The DPF differential pressure reading is changing faster than the filter could change. This usually means a pressure hose or sensor problem rather than real loading. Urgency: check soon - the machine may derate or limit a function. Check first: check both pressure hoses for blockage, kinks and loose fittings.
- FMI 10
- Abnormal rate of change
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Check both pressure hoses for blockage, kinks and loose fittings
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Checks
0 of 5 done
Causes
- Sensor hose blocked with soot or loose at its fitting, making the reading jump
- Delta-P sensor failing with a jumpy output
- Exhaust leak at the tap changing the pressure the sensor sees
- Water collected in a low point of the hose
How it failed
You'll notice: The DPF differential pressure changes faster than a real filter could change, so a hose or sensor fault is more likely than real loading.
Erratic or implausibleRead from FMI 10: abnormal rate of change
The reading jumps, drifts or disagrees with the sensors around it.
- Meter test
- Watch the live value on the service tool while you flex the harness and tap the connector.
- Good result
- A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Other SPN 3251 codes
- SPN 3251Aftertreatment 1 diesel particulate filter differential pressure - every FMI
- SPN 3251 FMI 0DPF differential pressure high, most severe
- SPN 3251 FMI 2DPF differential pressure erratic
- SPN 3251 FMI 3DPF differential pressure sensor voltage high
- SPN 3251 FMI 4DPF differential pressure sensor voltage low
- SPN 3251 FMI 16DPF differential pressure high, moderately severe
- SPN 3251 FMI 21DOC inlet/outlet pressure implausible
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list shows SPN 3251 with FMI 10. The guidance on this page is general, not taken from it.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
