EF Logo

J1939 · Aftertreatment - DPF

SPN 81 Fault Code

DPF intake pressure

What does SPN 81 mean?

Pressure of the exhaust entering the DPF, used with outlet pressure to estimate soot load. How urgent it is depends on the FMI after SPN 81 - pick it below. Check first: check the pressure sensor line for blockage and leaks, and look for a split hose.

FaultActiveSPN 81FMI --J1939 engine ECU
SPN 81
DPF intake pressure
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 81 - pick it below.

What should I check first?

Check the pressure sensor line for blockage and leaks, and look for a split hose

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 81?

You'll notice: Soot load cannot be judged, so regeneration may be requested too often or not at all.

Find the number shown after SPN 81 on your display.

  • 1SPN 81 FMI 1: DPF intake pressure is below the normal range, most severe levelReal conditionPACCAR MX-13
  • 2SPN 81 FMI 2: DPF intake pressure data is erratic, intermittent or incorrectErratic or implausiblePACCAR MX-13
  • 3SPN 81 FMI 3: DPF intake pressure signal voltage is above normal, or the circuit is shorted to a high sourceShorted highPACCAR MX-13
  • 4SPN 81 FMI 4: DPF intake pressure signal voltage is below normal, or the circuit is shorted to a low sourceShorted lowPACCAR MX-13
  • 11SPN 81 FMI 11: Fault for DPF intake pressure with a root cause that is not knownOtherPACCAR MX-13
  • 16SPN 81 FMI 16: DPF intake pressure is above the normal range, moderately severe levelReal conditionCummins ISX15

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 81 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Sensor line blocked or fitting loose
  • Sensor failed
  • Sensor hose split
  • DPF heavily loaded

Source

PACCAR MX-13 2013-2016 fault codes list (Diesel Laptops)

This list names SPN 81 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15, PACCAR MX-13; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.