Cat · Event codes
Cat Fault Code E361
High engine coolant temperature
What does Cat code E361 mean?
The engine ECM saw the coolant too hot. At the first level the lamp and alarm come on, at higher levels the ECM derates engine power by one percent per second. Urgency: stop now - shut down and fix before working on. Check first: check for active diagnostic codes first, such as 110-3 or 110-4.
Can I keep running with it?
Stop now
Shut down and fix before working on. Running on risks damage or the machine locks out.
What should I check first?
Check for active diagnostic codes first, such as 110-3 or 110-4.
Then 5 more checksWhere this code shows
Turn the key on and check the cluster or monitor for a warning lamp.
Checks
0 of 6 done
Causes
- Low coolant level or leak
- Blocked radiator or aftercooler
- Fan, belt or tensioner fault
- Air in the cooling system
1 more causeFewer causes
- Faulty coolant temperature sensor
How it failed
You'll notice: A warning lamp and alarm come on, then the engine loses power gradually as the derate takes hold.
OtherRead from how the source describes the code
The source does not say how this one failed.
- Meter test
- Read the code with the service tool and note which other codes are active with it.
- Good result
- Codes that appear together usually share one cause - start with the wiring they share.
When to stop
Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Engine sensors and sensor supply
- CID 172 FMI 03Intake manifold air temperature sensor voltage highShorted highCheck soon
- CID 172 FMI 04Intake manifold air temperature sensor voltage lowShorted lowCheck soon
- CID 262 FMI 035 V sensor supply voltage highShorted highCheck soon
- E360Low engine oil pressureOtherStop now
- E361High engine coolant temperatureOtherStop now
- E539High intake manifold temperatureReal conditionCheck soon
- E1044High intake manifold pressureOtherCheck soon
- E1045Low intake manifold pressureOtherCheck soon
- CID 1785 FMI 03Intake manifold pressure sensor voltage highShorted highCheck soon
Show the other 8 codesHide the other codes
- CID 41 FMI 038 V sensor supply voltage highShorted highCheck soon
- CID 91 FMI 03Throttle position sensor voltage highShorted highCheck soon
- CID 91 FMI 04Throttle position sensor voltage lowShorted lowCheck soon
- CID 100 FMI 03Engine oil pressure sensor voltage highShorted highCheck soon
- CID 100 FMI 04Engine oil pressure sensor voltage lowShorted lowCheck soon
- CID 110 FMI 03Engine coolant temperature sensor voltage highShorted highCheck soon
- CID 110 FMI 04Engine coolant temperature sensor voltage lowShorted lowCheck soon
- CID 1785 FMI 04Intake manifold pressure sensor voltage lowShorted lowCheck soon
Other Cat codes: Event codes
Related on Equipments Finder
Source
TM 5-3805-298-23-1 Field Maintenance Manual, 924H Wheel Loader, troubleshooting tables (E361)
This source lists E361 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Cat 924H wheel loader with C6.6 engine (engine ECM), per the 924H field maintenance manual; the same CID-FMI scheme is used on other Cat machines with C-series ECMs.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
