EF Logo

Bobcat · Engine

Bobcat Fault Code 08‑15

Engine coolant temperature shutdown level

What does Bobcat code 08-15 mean?

The engine was shut down on high coolant temperature. Do not restart it until the cause is found. Urgency: stop now - shut down and fix before working on. Check first: clean the radiator and cooler fins on both sides.

FaultStop08-15Bobcat · Engine

Can I keep running with it?

Stop now

Shut down and fix before working on. Running on risks damage or the machine locks out.

What should I check first?

Clean the radiator and cooler fins on both sides

Then 3 more checks
Code shows hereFAULT08-15

Where this code shows

On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.

Checks

0 of 4 done

Causes

  • Blocked radiator or cooler
  • Thermostat stuck closed
  • Low coolant or a major leak
  • Water pump or belt failure

How it failed

You'll notice: The engine was stopped by the controller because coolant temperature reached its shutdown limit.

OtherRead from how the source describes the code

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Engine oil pressure, coolant and air temperature

Show the other 19 codes
All 28 Engine oil pressure, coolant and air temperature codes on one page

Source

Bobcat S205 Operation & Maintenance Manual, service codes list

This source lists 08-15 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Older Bobcat skid-steer and track loaders using the two-digit service codes (S205 manual, similar models).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.