Bobcat · Engine
Bobcat Fault Code 08‑10
Engine coolant temperature high
What does Bobcat code 08-10 mean?
Coolant is hotter than normal. Reduce load and let the engine idle to cool while you check the cooling system. Urgency: check soon - the machine may derate or limit a function. Check first: check the fan belt tension and the water pump pulley for slip.
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Check the fan belt tension and the water pump pulley for slip
Then 3 more checksWhere this code shows
On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.
Checks
0 of 4 done
Causes
- Radiator or oil cooler core clogged with dirt
- Loose or slipping fan belt
- Low coolant level or a leak
- Thermostat stuck closed
How it failed
You'll notice: Coolant is hotter than normal and the temperature warning shows.
OtherRead from how the source describes the code
The source does not say how this one failed.
- Meter test
- Read the code with the service tool and note which other codes are active with it.
- Good result
- Codes that appear together usually share one cause - start with the wiring they share.
When to stop
Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Engine oil pressure, coolant and air temperature
- 04-14Engine oil pressure extremely lowLost messageStop now
- 04-15Engine oil pressure shutdown levelOtherStop now
- 04-21Engine oil pressure out of range highOtherCheck soon
- 04-22Engine oil pressure out of range lowOtherCheck soon
- 08-10Engine coolant temperature highOtherCheck soon
- 08-11Engine coolant temperature extremely highOtherStop now
- 08-15Engine coolant temperature shutdown levelOtherStop now
- 08-21Engine coolant temperature out of range highOtherCheck soon
- 08-22Engine coolant temperature out of range lowOtherCheck soon
Show the other 19 codesHide the other codes
- 04-09Engine oil pressure lowOtherCheck soon
- M0409Engine oil pressure too lowReal conditionCheck soon
- M0414Engine oil pressure extremely lowOtherStop now
- M0415Engine oil pressure shutdownOtherStop now
- M0421Engine oil pressure out of range highOtherCheck soon
- M0422Engine oil pressure out of range lowOtherCheck soon
- M0810Engine coolant temperature too highReal conditionCheck soon
- M0811Engine coolant temperature extremely highReal conditionStop now
- M0815Engine coolant temperature shutdownOtherStop now
- M0821Engine coolant temperature out of range highReal conditionCheck soon
- M0822Engine coolant temperature out of range lowReal conditionCheck soon
- M0826Engine coolant temperature pre shutdownOtherCheck soon
- M1210Air inlet temperature highLost messageCheck soon
- M1211Air inlet temperature extremely highOtherStop now
- M1910Engine ambient temperature highOtherCheck soon
- M1911Engine ambient temperature extremely highOtherCheck soon
- M1921Engine ambient temperature out of range highOtherCheck soon
- M1922Engine ambient temperature out of range lowOtherCheck soon
- M2910Exhaust gas temperature highOtherCheck soon
Other Bobcat codes: Engine
Related on Equipments Finder
Source
Bobcat S205 Operation & Maintenance Manual, service codes list
This source lists 08-10 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Older Bobcat skid-steer and track loaders using the two-digit service codes (S205 manual, similar models).
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
