Bobcat · Engine
Bobcat Fault Code M0415
Engine oil pressure shutdown
What does Bobcat code M0415 mean?
The controller has shut the engine down on very low oil pressure to prevent bearing damage. Urgency: stop now - shut down and fix before working on. Check first: review the service record for oil type and filter change; the wrong grade or old oil has less film strength when hot.
Can I keep running with it?
Stop now
Shut down and fix before working on. Running on risks damage or the machine locks out.
What should I check first?
Review the service record for oil type and filter change; the wrong grade or old oil has less film strength when hot
Then 3 more checksWhere this code shows
On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.
Checks
0 of 4 done
Causes
- Severe bearing wear
- Failed oil pump or blocked pickup
- Burst oil line or loose filter
- Oil pressure sender giving a false low signal
How it failed
You'll notice: The engine was stopped by the controller on low oil pressure.
OtherRead from how the source describes the code
The source does not say how this one failed.
- Meter test
- Read the code with the service tool and note which other codes are active with it.
- Good result
- Codes that appear together usually share one cause - start with the wiring they share.
When to stop
Low oil pressure can wreck bearings in minutes. Stop the engine and check the level before restarting; if the level is right, do not run it again until the pressure is checked with a gauge.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Engine oil pressure, coolant and air temperature
- 08-21Engine coolant temperature out of range highOtherCheck soon
- 08-22Engine coolant temperature out of range lowOtherCheck soon
- M0409Engine oil pressure too lowReal conditionCheck soon
- M0414Engine oil pressure extremely lowOtherStop now
- M0415Engine oil pressure shutdownOtherStop now
- M0421Engine oil pressure out of range highOtherCheck soon
- M0422Engine oil pressure out of range lowOtherCheck soon
- M0810Engine coolant temperature too highReal conditionCheck soon
- M0811Engine coolant temperature extremely highReal conditionStop now
Show the other 19 codesHide the other codes
- 04-09Engine oil pressure lowOtherCheck soon
- 04-14Engine oil pressure extremely lowLost messageStop now
- 04-15Engine oil pressure shutdown levelOtherStop now
- 04-21Engine oil pressure out of range highOtherCheck soon
- 04-22Engine oil pressure out of range lowOtherCheck soon
- 08-10Engine coolant temperature highOtherCheck soon
- 08-11Engine coolant temperature extremely highOtherStop now
- 08-15Engine coolant temperature shutdown levelOtherStop now
- M0815Engine coolant temperature shutdownOtherStop now
- M0821Engine coolant temperature out of range highReal conditionCheck soon
- M0822Engine coolant temperature out of range lowReal conditionCheck soon
- M0826Engine coolant temperature pre shutdownOtherCheck soon
- M1210Air inlet temperature highLost messageCheck soon
- M1211Air inlet temperature extremely highOtherStop now
- M1910Engine ambient temperature highOtherCheck soon
- M1911Engine ambient temperature extremely highOtherCheck soon
- M1921Engine ambient temperature out of range highOtherCheck soon
- M1922Engine ambient temperature out of range lowOtherCheck soon
- M2910Exhaust gas temperature highOtherCheck soon
Other Bobcat codes: Engine
Related on Equipments Finder
Source
Bobcat Service Code List (rev. 10-20, M-Series/R-Series loaders and M-Series excavators)
This source lists M0415 and its meaning. The guidance on this page is general, not taken from it.
The source covers: M-Series loaders (S450-S850, T450-T870) and M-Series excavators (E26-E85).
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
