Bobcat · Engine
Bobcat Fault Code 04‑09
Engine oil pressure low
What does Bobcat code 04-09 mean?
Oil pressure is under the warning level. Watch it closely and fix it before it reaches shutdown. Urgency: check soon - the machine may derate or limit a function. Check first: stop on level ground and check the dipstick; low oil is the cause far more often than a failed part.
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Stop on level ground and check the dipstick; low oil is the cause far more often than a failed part
Then 3 more checksWhere this code shows
On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.
Checks
0 of 4 done
Causes
- Worn pump or bearings
- Clogged oil filter or relief valve stuck open
- Engine oil level low
- Wrong or diluted oil that is too thin when hot
How it failed
You'll notice: The oil pressure warning shows during running and the engine may lose some power.
OtherRead from how the source describes the code
The source does not say how this one failed.
- Meter test
- Read the code with the service tool and note which other codes are active with it.
- Good result
- Codes that appear together usually share one cause - start with the wiring they share.
When to stop
Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Engine oil pressure, coolant and air temperature
- 04-09Engine oil pressure lowOtherCheck soon
- 04-14Engine oil pressure extremely lowLost messageStop now
- 04-15Engine oil pressure shutdown levelOtherStop now
- 04-21Engine oil pressure out of range highOtherCheck soon
- 04-22Engine oil pressure out of range lowOtherCheck soon
- 08-10Engine coolant temperature highOtherCheck soon
- 08-11Engine coolant temperature extremely highOtherStop now
- 08-15Engine coolant temperature shutdown levelOtherStop now
- 08-21Engine coolant temperature out of range highOtherCheck soon
Show the other 19 codesHide the other codes
- 08-22Engine coolant temperature out of range lowOtherCheck soon
- M0409Engine oil pressure too lowReal conditionCheck soon
- M0414Engine oil pressure extremely lowOtherStop now
- M0415Engine oil pressure shutdownOtherStop now
- M0421Engine oil pressure out of range highOtherCheck soon
- M0422Engine oil pressure out of range lowOtherCheck soon
- M0810Engine coolant temperature too highReal conditionCheck soon
- M0811Engine coolant temperature extremely highReal conditionStop now
- M0815Engine coolant temperature shutdownOtherStop now
- M0821Engine coolant temperature out of range highReal conditionCheck soon
- M0822Engine coolant temperature out of range lowReal conditionCheck soon
- M0826Engine coolant temperature pre shutdownOtherCheck soon
- M1210Air inlet temperature highLost messageCheck soon
- M1211Air inlet temperature extremely highOtherStop now
- M1910Engine ambient temperature highOtherCheck soon
- M1911Engine ambient temperature extremely highOtherCheck soon
- M1921Engine ambient temperature out of range highOtherCheck soon
- M1922Engine ambient temperature out of range lowOtherCheck soon
- M2910Exhaust gas temperature highOtherCheck soon
Other Bobcat codes: Engine
Related on Equipments Finder
Source
Bobcat S205 Operation & Maintenance Manual, service codes list
This source lists 04-09 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Older Bobcat skid-steer and track loaders using the two-digit service codes (S205 manual, similar models).
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
