Bobcat · Engine
Bobcat Fault Code M0810
Engine coolant temperature too high
What does Bobcat code M0810 mean?
Coolant is hotter than normal. Reduce load and let it idle to cool while you check the cooling system. Urgency: check soon - the machine may derate or limit a function. Check first: clean the radiator, oil cooler and screen of dirt, chaff and oil film so air can pass.
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Clean the radiator, oil cooler and screen of dirt, chaff and oil film so air can pass
Then 3 more checksWhere this code shows
On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.
Checks
0 of 4 done
Causes
- Thermostat stuck closed
- Low coolant level or a leak
- Cooling fan or shroud damaged
- Loose or slipping fan belt
How it failed
You'll notice: The engine coolant temperature is high.
Real conditionRead from how the source describes the code
The sensor reading is valid but outside the allowed range - the problem may be real.
- Meter test
- Check the real value with a separate gauge or thermometer before blaming the sensor.
- Good result
- If the gauge agrees with the display, fix the machine, not the sensor.
When to stop
Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Engine oil pressure, coolant and air temperature
4 other codes on this part are also real condition (M0409, M0811, M0821, M0822). When they show together, start at the wiring and connector they share.
- M0414Engine oil pressure extremely lowOtherStop now
- M0415Engine oil pressure shutdownOtherStop now
- M0421Engine oil pressure out of range highOtherCheck soon
- M0422Engine oil pressure out of range lowOtherCheck soon
- M0810Engine coolant temperature too highReal conditionCheck soon
- M0811Engine coolant temperature extremely highReal conditionStop now
- M0815Engine coolant temperature shutdownOtherStop now
- M0821Engine coolant temperature out of range highReal conditionCheck soon
- M0822Engine coolant temperature out of range lowReal conditionCheck soon
Show the other 19 codesHide the other codes
- 04-09Engine oil pressure lowOtherCheck soon
- 04-14Engine oil pressure extremely lowLost messageStop now
- 04-15Engine oil pressure shutdown levelOtherStop now
- 04-21Engine oil pressure out of range highOtherCheck soon
- 04-22Engine oil pressure out of range lowOtherCheck soon
- 08-10Engine coolant temperature highOtherCheck soon
- 08-11Engine coolant temperature extremely highOtherStop now
- 08-15Engine coolant temperature shutdown levelOtherStop now
- 08-21Engine coolant temperature out of range highOtherCheck soon
- 08-22Engine coolant temperature out of range lowOtherCheck soon
- M0409Engine oil pressure too lowReal conditionCheck soon
- M0826Engine coolant temperature pre shutdownOtherCheck soon
- M1210Air inlet temperature highLost messageCheck soon
- M1211Air inlet temperature extremely highOtherStop now
- M1910Engine ambient temperature highOtherCheck soon
- M1911Engine ambient temperature extremely highOtherCheck soon
- M1921Engine ambient temperature out of range highOtherCheck soon
- M1922Engine ambient temperature out of range lowOtherCheck soon
- M2910Exhaust gas temperature highOtherCheck soon
Other Bobcat codes: Engine
Related on Equipments Finder
Source
Bobcat Service Code List (rev. 10-20, M-Series/R-Series loaders and M-Series excavators)
This source lists M0810 and its meaning. The guidance on this page is general, not taken from it.
The source covers: M-Series loaders (S450-S850, T450-T870) and M-Series excavators (E26-E85).
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
