EF Logo

Bobcat · Engine

Bobcat Fault Code 04‑15

Engine oil pressure shutdown level

What does Bobcat code 04-15 mean?

The engine shut down on low oil pressure. This protects the engine bearings, so do not keep restarting it. Urgency: stop now - shut down and fix before working on. Check first: check the dipstick first and top up if low, then look underneath for the point where oil has been lost.

FaultStop04-15Bobcat · Engine

Can I keep running with it?

Stop now

Shut down and fix before working on. Running on risks damage or the machine locks out.

What should I check first?

Check the dipstick first and top up if low, then look underneath for the point where oil has been lost

Then 3 more checks
Code shows hereFAULT04-15

Where this code shows

On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.

Checks

0 of 4 done

Causes

  • Severe bearing wear
  • Failed oil pump or blocked pickup
  • Oil pressure sender giving a false low signal
  • Low oil level after a leak or overdue top-up

How it failed

You'll notice: The controller stopped the engine to protect it after oil pressure stayed too low.

OtherRead from how the source describes the code

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Engine oil pressure, coolant and air temperature

Show the other 19 codes
All 28 Engine oil pressure, coolant and air temperature codes on one page

Source

Bobcat S205 Operation & Maintenance Manual, service codes list

This source lists 04-15 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Older Bobcat skid-steer and track loaders using the two-digit service codes (S205 manual, similar models).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.