Bobcat · Safety interlocks
Bobcat Fault Code 17‑06
Hydraulic lock valve solenoid short to ground
What does Bobcat code 17-06 mean?
The hydraulic lock valve coil circuit is shorted to ground. Urgency: check soon - the machine may derate or limit a function. Check first: check the harness where it drops from the cab to the lift and tilt lock valve at the loader control valve for a pinched or chafed spot against the frame or a bracket.
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Check the harness where it drops from the cab to the lift and tilt lock valve at the loader control valve for a pinched or chafed spot against the frame or a bracket
Then 5 more checksWhere this code shows
On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.
Checks
0 of 6 done
Causes
- Harness pinched against a frame bracket
- Contamination in the lock valve spool bore
- Wet or corroded plug giving a path to ground
- Hydraulic lock valve solenoid output wire rubbed through to ground along the harness where it drops from the cab to the lift and tilt lock valve at the loader control valve
1 more causeFewer causes
- Coil shorted to its housing
How it failed
You'll notice: The controller found the hydraulic lock valve solenoid output pulled to ground, so the coil cannot be energised.
Shorted lowRead from how the source describes the code
The signal sits at or near zero volts - less than a working sensor can send.
- Meter test
- Key off, unplug both ends. Measure resistance from the signal wire to ground and to the machine frame.
- Good result
- Open circuit (OL) to ground. A low reading means chafed insulation touching metal.
When to stop
Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Traction lock and hydraulic lock solenoids
4 other codes on this part are also shorted low (16-06, C1029-11, M1606, M1706). When they show together, start at the wiring and connector they share.
- 16-05Traction lock hold solenoid short to batteryShorted highCheck soon
- 16-06Traction lock hold solenoid short to groundShorted lowCheck soon
- 16-07Traction lock hold solenoid open circuitOpen circuitCheck soon
- 17-05Hydraulic lock valve solenoid short to batteryShorted highCheck soon
- 17-06Hydraulic lock valve solenoid short to groundShorted lowCheck soon
- 17-07Hydraulic lock valve solenoid open circuitOpen circuitCheck soon
- C1029-11Hydraulic lock solenoid short to groundShorted lowCheck soon
- C1029-12Hydraulic lock solenoid short to batteryShorted highCheck soon
- C1029-13Hydraulic lock solenoid open circuitOpen circuitCheck soon
Show the other 16 codesHide the other codes
- 15-02Traction lock pull solenoid error ONOtherCheck soon
- 15-03Traction lock pull solenoid error OFFOtherCheck soon
- M1502Traction lock pull output error onOtherCheck soon
- M1503Traction lock pull output error offOtherCheck soon
- M1507Traction lock pull output open circuitOpen circuitCheck soon
- M1528Traction lock pull output failureOtherCheck soon
- M1605Traction lock hold solenoid short to batteryShorted highCheck soon
- M1606Traction lock hold solenoid short to groundShorted lowCheck soon
- M1607Traction lock hold solenoid open circuitOpen circuitCheck soon
- M1632Hydraulic bypass overcurrentLost messageCheck soon
- M1705Hydraulic lock valve solenoid short to batteryShorted highCheck soon
- M1706Hydraulic lock valve solenoid short to groundShorted lowCheck soon
- M1707Hydraulic lock valve solenoid open circuitOpen circuitCheck soon
- M1732Hydraulic lock valve solenoid overcurrentOtherCheck soon
- M2502Traction pull relay error onOtherCheck soon
- M2503Traction pull relay error offOtherCheck soon
Other Bobcat codes: Safety interlocks
Related on Equipments Finder
Source
Bobcat S205 Operation & Maintenance Manual, service codes (flash count table)
This source lists 17-06 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Older Bobcat skid-steer and track loaders using the two-digit service codes (S205 manual, similar models).
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
