EF Logo

Bobcat · Safety interlocks

Bobcat Fault Code 15‑03

Traction lock pull solenoid error OFF

What does Bobcat code 15-03 mean?

The traction lock pull solenoid is off when commanded on, so the drive may stay locked. Urgency: check soon - the machine may derate or limit a function. Check first: check the wiring along the harness under the cab floor and at the drive lock plug for continuity and for pins pushed back out of their housings.

FaultCheck15-03Bobcat · Safety interlocks

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Check the wiring along the harness under the cab floor and at the drive lock plug for continuity and for pins pushed back out of their housings

Then 5 more checks
Code shows hereFAULT15-03

Where this code shows

On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.

Checks

0 of 6 done

Causes

  • Blown fuse on the traction lock pull solenoid feed
  • Open coil
  • Broken wire or loose plug
  • Output driver not switching
1 more cause
  • Dirt or oil in the drive lock plug under the cab floor

How it failed

You'll notice: The controller sees the traction lock pull solenoid not energised when it has asked for it.

OtherRead from how the source describes the code

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Traction lock and hydraulic lock solenoids

Show the other 16 codes
All 25 Traction lock and hydraulic lock solenoids codes on one page

Source

Bobcat S205 Operation & Maintenance Manual, service codes (flash count table)

This source lists 15-03 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Older Bobcat skid-steer and track loaders using the two-digit service codes (S205 manual, similar models).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.