Bobcat · Safety interlocks
Bobcat Fault Code 17‑07
Hydraulic lock valve solenoid open circuit
What does Bobcat code 17-07 mean?
The controller sees no load on the hydraulic lock valve solenoid circuit, which means the circuit is open. Lift and tilt (or the excavator hydraulics) may stay locked out. Urgency: check soon - the machine may derate or limit a function. Check first: pull the plug and check for a pin that has backed out or a terminal that no longer grips the blade.
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Pull the plug and check for a pin that has backed out or a terminal that no longer grips the blade
Then 5 more checksWhere this code shows
On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.
Checks
0 of 6 done
Causes
- Coil winding open
- Pin backed out of the plug
- Broken wire between the controller and the hydraulic lock valve solenoid
- Contamination in the lock valve spool bore
1 more causeFewer causes
- Plug not fully seated
How it failed
You'll notice: The controller sees no load on the hydraulic lock valve solenoid circuit, so the output is open.
Open circuitRead from how the source describes the code
No current flows, or the signal floats - a wire, pin or coil is broken.
- Meter test
- Key off, unplug both ends. Measure each wire end to end, then the part itself across its pins.
- Good result
- Near 0 Ω on each wire. The part reads its listed resistance, not OL.
When to stop
Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Traction lock and hydraulic lock solenoids
5 other codes on this part are also open circuit (16-07, C1029-13, M1507, M1607 and more). When they show together, start at the wiring and connector they share.
- 16-06Traction lock hold solenoid short to groundShorted lowCheck soon
- 16-07Traction lock hold solenoid open circuitOpen circuitCheck soon
- 17-05Hydraulic lock valve solenoid short to batteryShorted highCheck soon
- 17-06Hydraulic lock valve solenoid short to groundShorted lowCheck soon
- 17-07Hydraulic lock valve solenoid open circuitOpen circuitCheck soon
- C1029-11Hydraulic lock solenoid short to groundShorted lowCheck soon
- C1029-12Hydraulic lock solenoid short to batteryShorted highCheck soon
- C1029-13Hydraulic lock solenoid open circuitOpen circuitCheck soon
- M1502Traction lock pull output error onOtherCheck soon
Show the other 16 codesHide the other codes
- 15-02Traction lock pull solenoid error ONOtherCheck soon
- 15-03Traction lock pull solenoid error OFFOtherCheck soon
- 16-05Traction lock hold solenoid short to batteryShorted highCheck soon
- M1503Traction lock pull output error offOtherCheck soon
- M1507Traction lock pull output open circuitOpen circuitCheck soon
- M1528Traction lock pull output failureOtherCheck soon
- M1605Traction lock hold solenoid short to batteryShorted highCheck soon
- M1606Traction lock hold solenoid short to groundShorted lowCheck soon
- M1607Traction lock hold solenoid open circuitOpen circuitCheck soon
- M1632Hydraulic bypass overcurrentLost messageCheck soon
- M1705Hydraulic lock valve solenoid short to batteryShorted highCheck soon
- M1706Hydraulic lock valve solenoid short to groundShorted lowCheck soon
- M1707Hydraulic lock valve solenoid open circuitOpen circuitCheck soon
- M1732Hydraulic lock valve solenoid overcurrentOtherCheck soon
- M2502Traction pull relay error onOtherCheck soon
- M2503Traction pull relay error offOtherCheck soon
Other Bobcat codes: Safety interlocks
Related on Equipments Finder
Source
Bobcat S205 Operation & Maintenance Manual, service codes (flash count table)
This source lists 17-07 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Older Bobcat skid-steer and track loaders using the two-digit service codes (S205 manual, similar models).
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
