EF Logo

Bobcat · Engine

Bobcat Fault Code 04‑09

Engine oil pressure low

What does Bobcat code 04-09 mean?

Oil pressure is under the warning level. Watch it closely and fix it before it reaches shutdown. Urgency: check soon - the machine may derate or limit a function. Check first: stop on level ground and check the dipstick; low oil is the cause far more often than a failed part.

FaultCheck04-09Bobcat · Engine

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Stop on level ground and check the dipstick; low oil is the cause far more often than a failed part

Then 3 more checks
Code shows hereFAULT04-09

Where this code shows

On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.

Checks

0 of 4 done

Causes

  • Worn pump or bearings
  • Clogged oil filter or relief valve stuck open
  • Engine oil level low
  • Wrong or diluted oil that is too thin when hot

How it failed

You'll notice: The oil pressure warning shows during running and the engine may lose some power.

OtherRead from how the source describes the code

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Engine oil pressure, coolant and air temperature

Show the other 19 codes
All 28 Engine oil pressure, coolant and air temperature codes on one page

Source

Bobcat S205 Operation & Maintenance Manual, service codes list

This source lists 04-09 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Older Bobcat skid-steer and track loaders using the two-digit service codes (S205 manual, similar models).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.