EF Logo

excavatormade by KomatsuUAE, Global

Komatsu PC220LC-8M0 (PC220-8)Specs, weight and dimensions

Weight
25.5 t
25,500 kg
Dig depth
6.92 m
22.7 ft
Est. new price
~AED 790k

Quick answer

The Komatsu PC220LC-8M0 is a 25.5-tonne excavator with a Komatsu SAA6D107E-1 engine rated at 123 kW (164 HP). It digs to 6.92 m, reaches 10.02 m, dumps at up to 7.035 m and works a 1 m³ bucket. It suits digging foundations and trenches, loading dump trucks and demolition with a breaker. Its rivals include the Komatsu PC210 (20.5 t) and the Cat 325 (26.4 t).

Komatsu PC220LC-8M0 (illustration)

How much does a Komatsu PC220LC-8M0 weigh?

The Komatsu PC220LC-8M0 weighs 25.5 tonnes (25,500 kg, 56,218 lb) in working order, with fuel, operator and standard attachment. That is 24% heavier than the Komatsu PC210 (20.5 t) and 3% lighter than the Cat 325 (26.4 t). It puts 0.52 kg/cm2 of pressure on the ground. The figures are from Komatsu PC200/LC-8M0, PC220/LC-8M0 brochure ZESS003200-01 (Komatsu Australia, 2015).

What engine is in the Komatsu PC220LC-8M0?

The Komatsu PC220LC-8M0 has a Komatsu SAA6D107E-1 engine rated at 123 kW (164 HP) net, ISO 9249 / SAE J1349, at 2000 min-1. It displaces 6.7 L. Emissions: EPA Tier 3 and EU Stage 3A emissions equivalent. The fuel tank holds 400 L (105.7 US gal) and the engine takes 23.1 L (6.1 US gal) of oil.

How deep can a Komatsu PC220LC-8M0 dig?

The Komatsu PC220LC-8M0 digs to 6.92 m, reaches 10.02 m, dumps at up to 7.035 m and works a 1 m³ bucket. In imperial units the digging depth is 22.7 ft. On the same row of their sheets, the Komatsu PC210 shows 6.515 m and the Cat 325 shows 6.7 m.

What are the Komatsu PC220LC-8M0 dimensions?

The Komatsu PC220LC-8M0 is 9.88 m (32 ft 5 in) long, 3.28 m (10 ft 9 in) wide and 3.06 m (10 ft) high. As it stands it is too big for the door of a standard shipping container. The Komatsu PC210 is 9.55 m long, 2.80 m wide and 3.04 m high.

Komatsu PC220LC-8M0 vs Komatsu PC210: what is the difference?

The Komatsu PC220LC-8M0 is 24% heavier than the Komatsu PC210: 25.5 t against 20.5 t. The Komatsu PC220LC-8M0 has more gross power (129 kW against 123 kW), digs deeper (6.92 m against 6.515 m) and reaches further (10.18 m against 9.86 m). The Komatsu PC210 dumps higher (7.16 m against 7.035 m), has more hydraulic flow (475 L/min against 439 L/min) and turns tighter (2.9 m against 2.94 m).

Komatsu PC220LC-8M0 vs Komatsu PC210, every figure

These figures are for the PC220LC-8M0. The PC220-7 is not covered here and has figures of its own, so check the serial plate before using these for one.

Komatsu PC220LC-8M0 dimensions

Komatsu PC220LC-8M0, side view with dimensions (illustration)3.06 m3.85 m9.89 m
Side view
Komatsu PC220LC-8M0, front view (illustration)3.28 m
Front view
Overall height
3.06 m
Track on ground
3.85 m
Overall length
9.89 m
Overall width
3.28 m

Illustration; figures from the maker's sheet.

How big is the Komatsu PC220LC-8M0?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Komatsu PC220LC-8M0 drawn to scale beside a person and a pickup truck. The Komatsu PC220LC-8M0 is 9.89 m long - about 1.9 pickup trucks - and 3.06 m tall, 1.7 times a person's height.Komatsu PC220LC-8M09.89 × 3.06 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Komatsu PC220LC-8M0 is 9.89 m long - about 1.9 pickup trucks - and 3.06 m tall, 1.7 times a person's height.

Komatsu PC220LC-8M0 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

72 figures in 7 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length9.885 m[1] p.7
Length on ground (transport)5.39 m[1] p.7
Overall height (to top of boom)3.185 m[1] p.7
Overall width3.28 m[1] p.7
Overall height (to top of cab)3.055 m[1] p.7
Ground clearance, counterweight1.1 m[1] p.7
Ground clearance (minimum)0.44 m[1] p.7
Tail swing radius2.94 m[1] p.7
Track length on ground3.845 m[1] p.7
Dimensions, part 2 of 2
FigureValue (metric)Source
Track length4.64 m[1] p.7
Track gauge2.58 m[1] p.7
Width of crawler3.18 m[1] p.7
Shoe width0.6 m[1] p.7
Grouser height0.026 m[1] p.7
Machine cab height2.11 m[1] p.7
Machine cab width2.71 mIncluding handrail[1] p.7
Swing centre to rear end2.905 m[1] p.7

Working range

Working range, part 1 of 2
FigureValue (metric)Source
Max digging height10 m[1] p.7
Max dumping height7.035 m[1] p.7
Max digging depth6.92 m[1] p.7
Max vertical wall digging depth6.01 m[1] p.7
Working range, part 2 of 2
FigureValue (metric)Source
Max digging depth of cut for 8' level6.7 m[1] p.7
Max digging reach10.18 m[1] p.7
Max reach at ground level10.02 m[1] p.7
Min front swing radius3.45 mRow H; the brochure labels it 'Max. swing radius', but 3,450 mm is the minimum front swing radius (PC220/LC-8M0)[1] p.7

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Bucket capacity1 m³SAE heaped factory bucket, with 3045 mm arm[1] p.7
Bucket digging force152 kNSAE rating, at power max; 15,500 kg[1] p.7
Arm digging force119 kNSAE rating, at power max; 12,100 kg[1] p.7
Bucket digging force (ISO 6015, power max)172 kNISO rating, at power max; 17,500 kg[1] p.7
Arm digging force (ISO 6015, power max)129 kNISO rating, at power max; 13,200 kg[1] p.7
Swing speed11.7 min-1[1] p.6
Performance, part 2 of 2
FigureValue (metric)Source
Travel speed (high)5.5 km/hMid 4.2 km/h, Low 3.1 km/h (Auto-Shift)[1] p.6
Travel speed (low)3.1 km/hAuto-Shift low[1] p.6
Max drawbar pull202 kN20,570 kg[1] p.6
Gradeability35°70%[1] p.6
Rated lifting capacity2,850 kgPC220LC-8M0 with 5850 mm boom, 3040 mm arm, 600 mm shoes, lifting suspended loads with KGA quick hitch (Australian standard lifting mode)[1] p.6

Weight

Weight
FigureValue (metric)Source
Operating weight25,500 kgIncludes 5850 mm one-piece boom, 3045 mm arm, 600 mm shoes, full fuel tank, operator, standard equipment, KGA quick hitch and 1200 mm KGA bucket; 24,400 kg for PC220-8M0[1] p.6
Ground pressure0.52 kg/cm2PC220LC-8M0, 600 mm shoes; 0.56 kg/cm2 for PC220-8M0[1] p.6

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelKomatsu SAA6D107E-1[1] p.6
TypeWater-cooled, 4-cycle, direct injection[1] p.6
AspirationTurbocharged, aftercooled[1] p.6
EmissionsEPA Tier 3 and EU Stage 3A emissions equivalent[1] p.6
Cylinders6[1] p.6
Bore107 mm[1] p.6
Engine, part 2 of 2
FigureValue (metric)Source
Stroke124 mm[1] p.6
Displacement6.7 L[1] p.6
Gross power129 kW (173 HP)SAE J1995, at 2000 min-1[1] p.6
Net power123 kW (164 HP)ISO 9249 / SAE J1349, at 2000 min-1[1] p.6
Fan driveMechanicalFan drive method for radiator cooling[1] p.6
GovernorAll-speed control, electronic[1] p.6

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
SystemHydrauMind: closed-centre, load-sensing and pressure-compensated valves6 selectable working modes[1] p.6
Main pumpsVariable-displacement piston typeBoom, arm, bucket, swing and travel circuits[1] p.6
Pump flow439 L/minMaximum[1] p.6
Max pressure37.3 MPa (380 kg/cm2)Implement and travel circuit relief valve setting[1] p.6
Max pressure, travel37.3 MPa (380 kg/cm2)Relief valve setting, travel circuit[1] p.6
Swing circuit pressure28.9 MPa (295 kg/cm2)Relief valve setting[1] p.6
Hydraulics, part 2 of 2
FigureValue (metric)Source
Pilot circuit pressure3.2 MPa (33 kg/cm2)[1] p.6
Travel motors2 x axial piston motor with parking brake[1] p.6
Swing motor1 x axial piston motor with swing holding brake[1] p.6
Boom cylinders2 - bore 130 mm, stroke 1335 mm, rod 90 mm[1] p.6
Arm cylinder1 - bore 145 mm, stroke 1635 mm, rod 100 mm[1] p.6
Bucket cylinder1 - bore 130 mm, stroke 1020 mm, rod 90 mm[1] p.6

Undercarriage

Undercarriage, part 1 of 2
FigureValue (metric)Source
Center frameX-frame[1] p.6
Track frameBox-section[1] p.6
Track sealSealed track[1] p.6
Track adjusterHydraulic[1] p.6
Track shoes (each side)5147 on PC220-8M0[1] p.6
Undercarriage, part 2 of 2
FigureValue (metric)Source
Track rollers (each side)108 on PC220-8M0[1] p.6
Carrier rollers (each side)2[1] p.6
Swing reductionPlanetary gear, grease-bathed swing circle[1] p.6
Service brakeHydraulic lock[1] p.6
Parking brakeMechanical disc brake[1] p.6

Build: Komatsu PC220LC-8M0 (long undercarriage, 5850 mm one-piece boom, 3045 mm arm, 600 mm shoes, 1.0 m3 SAE heaped bucket) from Komatsu Australia's PC200/220-8M0 brochure ZESS003200-01 (2015, Australian-NZ specification). No Middle East PC220-8 sheet could be found; the standard-track PC220-8M0 differs only in the undercarriage and weight rows noted.

  1. [1]Komatsu PC200/LC-8M0, PC220/LC-8M0 brochure ZESS003200-01 (Komatsu Australia, 2015)

Komatsu PC220LC-8M0 service

What each system holds and when Komatsu says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
400 L105.7 US gal
Cooling system
19.9 L5.3 US gal
Engine oil
23.1 L6.1 US gal
Final drive, each side
5 L1.3 US gal
Swing drive
7.2 L1.9 US gal
Hydraulic tank
135 L35.7 US gal

Service intervals

Engine oil and filter
500 hours
Hydraulic oil
5,000 hours
Hydraulic oil filter
1,000 hours

Komatsu PC220LC-8M0 against its rivals

The excavators nearest in weight from other makers, figure by figure, each shown at the same scale.

Komatsu PC220LC-8M0, Komatsu PC210, Cat 325, John Deere 210 P-Tier: specifications side by side
FigureKomatsu PC220LC-8M0this pageKomatsu PC210 specsCat 325 specsJohn Deere 210 P-Tier specs
Operating weight25,500 kg20,500 kg26,400 kg23,247 kg
Gross power129 kW (173 HP)123 kW (165 HP)129.4 kW (174 hp)not on its sheet
Max digging depth6.92 m6.515 m6.7 m6.67 m
Max digging reach10.18 m9.86 mnot on its sheet9.92 m
Max dumping height7.035 m7.16 m7.9 m7.18 m
Bucket capacity1 m³1 m³1.19 m³0.91 m³
Bucket digging force152 kN149 kN150 kN158 kN
Pump flow439 L/min475 L/min429 L/minnot on its sheet
Fuel tank400 L400 L313 L403 L
Every figureFull sheetKomatsu PC220LC-8M0 vs Komatsu PC210

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Komatsu PC220LC-8M0 if you need a deeper dig (6.92 m) and longer reach (10.18 m).
  • Pick the Komatsu PC210 if you need more hydraulic flow (475 L/min).
  • Pick the Cat 325 if you need more gross power (129.4 kW), a higher dump (7.9 m) and a bigger bucket (1.19 m³).
  • Pick the John Deere 210 P-Tier if you need more digging force (158 kN) and a bigger fuel tank (403 L).

Komatsu PC220LC-8M0 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Komatsu PC220LC-8M0 costs about AED 790,000, base machine before options, freight and tax - an estimate from published estimates, checked November 2026. Sources: equipbook.ai.

Komatsu PC220LC-8M0 on EquipmentsFinder in the UAE now: 1 listed for rent, 3 listed for sale. Too few carry a price to give a Komatsu PC220LC-8M0 range, so the figure below is for all excavators.

See all 1

Typical hire, per daymedian of 28

AED 1,225 /day

No priced Komatsu PC220LC-8M0 for hire yet: this is all excavators

Low AED 800High AED 1,800

Who is asking for excavators in the UAE

Contractors posted 48 requests for excavators on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (28), Abu Dhabi (11) and Fujairah (3). Requests name a kind of machine, not a model, so this counts every excavator, the Komatsu PC220LC-8M0 among them.

Requests, last 12 months
48
For Dubai
28
For Abu Dhabi
11
  • 20 Ton Wheel Excavator Required For Purchase19 November 2026
  • 20 ton Tracked excavator pre-fitted with hydraulic vibratory roller Required For RentAbu Dhabi / 17 November 2026
  • 85 Ton Excavator with 26m Boom Required For RentDubai / 16 November 2026

Open excavator requests on the Inquiry BoardPost a request for a Komatsu PC220LC-8M0

Does a Komatsu PC220LC-8M0 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Komatsu PC220LC-8M0 is 3.28 m wide against a 2.34 m door opening and 3.06 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
9.89 m
Width
3.28 m
Height
3.06 m
Weight
25.5 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Komatsu PC220LC-8M0

For the people who run one: codes, charts and calculators that fit an excavator.

Same class: 30 ton excavators

30 ton excavators with an operating weight of 25 to 35 t, lightest first. The Komatsu PC220LC-8M0 is 1 of 5; every figure is the maker's.

  1. 1Komatsu PC220LC-8M0This page25.5 t
  2. 2Cat 32526.4 t
  3. 3Cat 33031.4 t
  4. 4Komatsu PC300LC-8M032.2 t
  5. 5SANY SY33533.6 t

Popular Komatsu excavator models

Komatsu PC220LC-8M0 fault codes and serial number

All Komatsu fault codesFind the year from a Komatsu serial number

More Komatsu PC220LC-8M0 questions

How much horsepower does the Komatsu PC220LC-8M0 have?

164 hp (123 kW) net, ISO 9249 / SAE J1349, at 2000 min-1.

What size bucket does a Komatsu PC220LC-8M0 take?

1 m³ (1.31 yd³) is the bucket the maker quotes its figures with; other sizes fit.

How far can a Komatsu PC220LC-8M0 reach?

Its maximum reach at ground level is 10.02 m (32.9 ft).

How tall is a Komatsu PC220LC-8M0?

3.06 m (10 ft) overall.

How wide is a Komatsu PC220LC-8M0?

3.28 m (10 ft 9 in) overall.

How high can a Komatsu PC220LC-8M0 dig?

Its maximum digging height is 10 m (32.8 ft).

What is the tail swing radius of a Komatsu PC220LC-8M0?

2.94 m (9.6 ft).

What is the hydraulic flow of a Komatsu PC220LC-8M0?

439 L/min (116 US gpm), maximum.

What are the Komatsu PC220LC-8M0's main competitors?

The machines nearest it in size are the Cat 325, the John Deere 210 P-Tier and the Cat 323. Each has a side-by-side comparison on EquipmentsFinder.

Is the Komatsu PC220LC-8M0 sold in the UAE?

Yes. The Komatsu PC220LC-8M0 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Komatsu PC220LC-8M0 used for?

A crawler excavator: a digging arm and bucket on a cab that turns all the way round, on tracks for grip and stability. Typical jobs: digging foundations and trenches, loading dump trucks, demolition with a breaker, lifting pipes into trenches.

Embed this spec card

The Komatsu PC220LC-8M0's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/komatsu-pc220" title="Komatsu PC220LC-8M0 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/komatsu-pc220">Komatsu PC220LC-8M0 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Komatsu PC220LC-8M0 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.