EF Logo

excavatormade by KomatsuUAE, Global

Komatsu PC300LC-8M0 (PC300-8M0)Specs, weight and dimensions

Weight
32.2 t
32,200 kg
Dig depth
7.38 m
24.2 ft
Est. new price
~AED 990k

Quick answer

The Komatsu PC300LC-8M0 is a 32.2-tonne excavator with a Komatsu SAA6D114E-3 engine rated at 187 kW (250 HP). It digs to 7.38 m, reaches 10.92 m, dumps at up to 7.05 m and works a 1.4 m³ bucket. It suits digging foundations and trenches, loading dump trucks and demolition with a breaker. People compare it with the Cat 330 (31.4 t) and the Komatsu PC360LC-11 (36.5 t).

Komatsu PC300LC-8M0 (illustration)

How much does a Komatsu PC300LC-8M0 weigh?

The Komatsu PC300LC-8M0 weighs 32.2 tonnes (32,200 kg, 70,990 lb) in working order, with fuel, operator and standard attachment. That is 3% heavier than the Cat 330 (31.4 t) and 12% lighter than the Komatsu PC360LC-11 (36.5 t). It puts 51.6 kPa (0.53 kgf/cm2) of pressure on the ground. The figures are from Komatsu PC300/LC-8M0 brochure EENSB12600-2203 (Komatsu, 2022; dealer-hosted copy).

What engine is in the Komatsu PC300LC-8M0?

The Komatsu PC300LC-8M0 has a Komatsu SAA6D114E-3 engine rated at 187 kW (250 HP) net, ISO 9249 / SAE J1349, at 1,950 rpm. It displaces 8.3 L. Emissions: U.S. EPA Tier 3 and EU Stage 3A emissions equivalent. The fuel tank holds 605 L (159.8 US gal) and the engine takes 37 L (9.8 US gal) of oil.

How deep can a Komatsu PC300LC-8M0 dig?

The Komatsu PC300LC-8M0 digs to 7.38 m, reaches 10.92 m, dumps at up to 7.05 m and works a 1.4 m³ bucket. In imperial units the digging depth is 24.2 ft. On the same row of their sheets, the Cat 330 shows 7.25 m and the Komatsu PC360LC-11 shows 7.38 m.

What are the Komatsu PC300LC-8M0 dimensions?

The Komatsu PC300LC-8M0 is 11.14 m (36 ft 7 in) long, 3.29 m (10 ft 10 in) wide and 3.15 m (10 ft 4 in) high. As it stands it is too big for the door of a standard shipping container. The Cat 330 is 10.42 m long, 3.39 m wide and 3.06 m high.

Komatsu PC300LC-8M0 vs Cat 330: what is the difference?

The Komatsu PC300LC-8M0 is 3% heavier than the Cat 330: 32.2 t against 31.4 t. The Komatsu PC300LC-8M0 digs deeper (7.38 m against 7.25 m), reaches further (10.92 m against 10.69 m) and dumps higher (7.05 m against 6.94 m). Both sets of figures are the makers’ own, for the builds on our sheets.

Komatsu PC300LC-8M0 vs Cat 330, every figure

These figures are for the PC300LC-8M0. The PC300-7 and PC300-11 are not covered here and have figures of their own, so check the serial plate before using these for one.

Komatsu PC300LC-8M0 dimensions

Komatsu PC300LC-8M0, side view with dimensions (illustration)3.15 m4.03 m11.1 m
Side view
Komatsu PC300LC-8M0, front view (illustration)3.29 m
Front view
Overall height
3.15 m
Track on ground
4.03 m
Overall length
11.1 m
Overall width
3.29 m

Illustration; figures from the maker's sheet.

How big is the Komatsu PC300LC-8M0?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Komatsu PC300LC-8M0 drawn to scale beside a person, a pickup truck and a 40 ft container. The Komatsu PC300LC-8M0 is 11.14 m long - 91% of a forty-foot container's length - and 3.15 m tall, 1.8 times a person's height.Komatsu PC300LC-8M011.14 × 3.15 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Komatsu PC300LC-8M0 is 11.14 m long - 91% of a forty-foot container's length - and 3.15 m tall, 1.8 times a person's height.

Komatsu PC300LC-8M0 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

73 figures in 6 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length11.14 mTransport length with 3185 mm arm; 11.30 / 11.18 / 11.17 m with 2220 / 2550 / 4020 mm arms[1] p.20
Length on ground (transport)5.93 mLC; 5.755 m on PC300-8M0[1] p.20
Overall height (to top of boom)3.285 mTransport height with 3185 mm arm; includes grouser height[1] p.20
Overall width3.29 mLC with 700 mm shoes; 3.19 m on PC300-8M0 with 600 mm shoes[1] p.20
Overall height (to top of cab)3.145 mIncluding grouser height[1] p.20
Ground clearance, counterweight1.185 m[1] p.20
Ground clearance (minimum)0.5 m[1] p.20
Tail swing radius3.45 m[1] p.20
Track length on ground4.03 mLC; 3.70 m on PC300-8M0[1] p.20
Dimensions, part 2 of 2
FigureValue (metric)Source
Track length4.955 mLC; 4.625 m on PC300-8M0[1] p.20
Track gauge2.59 m[1] p.20
Width of crawler3.29 mLC with 700 mm shoes[1] p.20
Shoe width0.7 mLC standard; 600 mm on PC300-8M0[1] p.20
Grouser height0.036 m[1] p.20
Machine cab height2.585 m[1] p.20
Machine cab width3.09 mIncluding handrail[1] p.20
Swing centre to rear end3.405 m[1] p.20

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Operating weight32,200 kgPC300LC-8M0 with 700 mm shoes; includes 6470 mm boom, 3185 mm arm, 1.40 m3 ISO 7451 heaped bucket, full fuel tank, operator and standard equipment[1] p.19
Operating weight, 600 mm shoes31,600 kgPC300LC-8M0; 31,100 kg for PC300-8M0[1] p.19
Weight, part 2 of 2
FigureValue (metric)Source
Operating weight, 800 mm shoes32,580 kgPC300LC-8M0; 32,010 kg for PC300-8M0[1] p.19
Ground pressure51.6 kPa (0.53 kgf/cm2)PC300LC-8M0, 700 mm shoes; 59.0 kPa with 600 mm and 45.7 kPa with 800 mm shoes[1] p.19

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Bucket capacity1.4 m³ISO 7451 heaped, with 3185 mm arm; Komatsu lists 0.52 - 1.80 m3 across the range (p.1)[1] p.19
Bucket digging force200 kNSAE J1179 rating at power max, 3185 mm arm; 228 kN with 2220 / 2550 mm arms[1] p.21
Arm digging force165 kNSAE J1179 rating at power max, 3185 mm arm; 225 / 193 / 139 kN with 2220 / 2550 / 4020 mm arms[1] p.21
Bucket digging force (ISO 6015, power max)227 kNISO 6015 rating at power max, 3185 mm arm; 259 kN with 2220 / 2550 mm arms[1] p.21
Arm digging force (ISO 6015, power max)171 kNISO 6015 rating at power max, 3185 mm arm[1] p.21
Swing speed9.5 rpm[1] p.19
Travel speed (high)5.5 km/hAuto-shift; mid 4.5 km/h, low 3.2 km/h[1] p.19
Travel speed (low)3.2 km/hAuto-shift low[1] p.19
Max drawbar pull264 kN26,900 kgf[1] p.19
Performance, part 2 of 2
FigureValue (metric)Source
Gradeability35°70%[1] p.19
Max digging height10.1 mWith 6470 mm boom and 3185 mm arm[1] p.21
Max dumping height7.05 m[1] p.21
Max digging depth7.38 m[1] p.21
Max vertical wall digging depth6.4 m[1] p.21
Max depth cut for 2,440 mm level bottom7.18 m[1] p.21
Max digging reach11.1 m[1] p.21
Max reach at ground level10.92 m[1] p.21
Min swing radius4.31 m[1] p.21

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelKomatsu SAA6D114E-3[1] p.19
TypeWater-cooled, 4-cycle, direct injection[1] p.19
AspirationTurbocharged, aftercooled[1] p.19
EmissionsU.S. EPA Tier 3 and EU Stage 3A emissions equivalent[1] p.19
Cylinders6[1] p.19
Bore114 mm[1] p.19
Engine, part 2 of 2
FigureValue (metric)Source
Stroke135 mm[1] p.19
Displacement8.3 L[1] p.19
Gross power194 kW (260 HP)SAE J1995, at 1,950 rpm[1] p.19
Net power187 kW (250 HP)ISO 9249 / SAE J1349, at 1,950 rpm[1] p.19
Fan driveMechanical[1] p.19
GovernorAll-speed control, electronic[1] p.19

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
SystemHydrauMind: closed-centre, load-sensing and pressure-compensated valves6 selectable working modes[1] p.19
Main pumps2 variable-displacement piston pumpsBoom, arm, bucket, swing and travel circuits[1] p.19
Pump flow535 L/minMaximum[1] p.19
Max pressure37.3 MPa (380 kgf/cm2)Implement and travel circuit relief valve setting[1] p.19
Max pressure, swing27.9 MPa (285 kgf/cm2)Relief valve setting[1] p.19
Max pressure, travel373 bar37.3 MPa (380 kgf/cm2); the brochure gives the travel circuit the same setting as the implement circuits[1] p.19
Hydraulics, part 2 of 2
FigureValue (metric)Source
Pilot circuit pressure3.2 MPa (33 kgf/cm2)[1] p.19
Travel motors2 x axial piston motor with parking brake[1] p.19
Swing motor1 x axial piston motor with swing holding brake[1] p.19
Boom cylinders2 - bore 140 mm, stroke 1480 mm, rod 100 mm[1] p.19
Arm cylinder1 - bore 160 mm, stroke 1825 mm, rod 110 mm[1] p.19
Bucket cylinder1 - bore 140 mm, stroke 1285 mm, rod 100 mmFor the 3185 mm arm; 150 mm bore and 110 mm rod with 2220 / 2550 mm arms[1] p.19

Undercarriage

Undercarriage, part 1 of 2
FigureValue (metric)Source
Center frameX-frame[1] p.19
Track frameBox-section[1] p.19
Track sealSealed track[1] p.19
Track adjusterHydraulic[1] p.19
Track shoes (each side)4845 on PC300-8M0[1] p.19
Undercarriage, part 2 of 2
FigureValue (metric)Source
Track rollers (each side)87 on PC300-8M0[1] p.19
Carrier rollers (each side)2[1] p.19
Swing reductionPlanetary gear, grease-bathed swing circle[1] p.19
Service brakeHydraulic lock[1] p.19
Parking brakeMechanical disc brake[1] p.19

Build: Komatsu PC300LC-8M0 (long undercarriage, 6470 mm one-piece boom, 3185 mm arm, 700 mm triple-grouser shoes, 1.40 m3 ISO heaped bucket; U.S. EPA Tier 3 / EU Stage 3A equivalent engine) from Komatsu's PC300/LC-8M0 brochure EENSB12600 (March 2022). Komatsu Middle East lists the standard-track PC300-8M0; its figures differ only in the undercarriage rows noted below.

  1. [1]Komatsu PC300/LC-8M0 brochure EENSB12600-2203 (Komatsu, 2022; dealer-hosted copy)
  2. [2]Komatsu Middle East, PC300-8M0 product page (model listing only, no figures taken)

Komatsu PC300LC-8M0 service

What each system holds and when Komatsu says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
605 L159.8 US gal
Cooling system
31 L8.2 US gal
Engine oil
37 L9.8 US gal
Final drive (each)
9 L2.4 US gal
Swing drive
16 L4.2 US gal
Hydraulic tank
188 L49.7 US gal

Komatsu PC300LC-8M0 against its rivals

The excavators nearest in weight from other makers, figure by figure, each shown at the same scale.

Komatsu PC300LC-8M0, Cat 330, Komatsu PC360LC-11, SANY SY335: specifications side by side
FigureKomatsu PC300LC-8M0this pageCat 330 specsKomatsu PC360LC-11 specsSANY SY335 specs
Operating weight32,200 kg31,400 kg36,490 kg33,600 kg
Gross power194 kW (260 HP)195 kW (261 hp)202 kW (271 HP)not on its sheet
Max digging depth7.38 m7.25 m7.38 m6.815 m
Max digging reach11.1 mnot on its sheet11.1 m10.87 m
Max dumping height7.05 m6.94 m7.11 m7.359 m
Bucket capacity1.4 m³1.8 m³1.8 m³1.7 m³
Bucket digging force200 kN179 kN200 kN204 kN
Pump flow535 L/min560 L/min535 L/min560 L/min
Fuel tank605 L474 L605 L540 L
Every figureFull sheetKomatsu PC300LC-8M0 vs Cat 330

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • The Komatsu PC300LC-8M0 leads none of these figures, so the choice comes down to price, hours and dealer support.
  • Pick the Cat 330 if the lightest machine matters: at 31.4 t it weighs the least of the 4, and it leads no other figure here.
  • Pick the Komatsu PC360LC-11 if you need more gross power (202 kW).
  • Pick the SANY SY335 if you need a higher dump (7.359 m) and more digging force (204 kN).

Komatsu PC300LC-8M0 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Komatsu PC300LC-8M0 costs about AED 990,000, base machine before options, freight and tax - an estimate from published estimates, checked November 2026. Sources: equipbook.ai.

Komatsu PC300LC-8M0 on EquipmentsFinder in the UAE now: 5 listed for rent, 3 listed for sale. Too few carry a price to give a Komatsu PC300LC-8M0 range, so the figure below is for all excavators.

Who is asking for excavators in the UAE

Contractors posted 48 requests for excavators on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (28), Abu Dhabi (11) and Fujairah (3). Requests name a kind of machine, not a model, so this counts every excavator, the Komatsu PC300LC-8M0 among them.

Requests, last 12 months
48
For Dubai
28
For Abu Dhabi
11
  • 20 Ton Wheel Excavator Required For Purchase19 November 2026
  • 20 ton Tracked excavator pre-fitted with hydraulic vibratory roller Required For RentAbu Dhabi / 17 November 2026
  • 85 Ton Excavator with 26m Boom Required For RentDubai / 16 November 2026

Open excavator requests on the Inquiry BoardPost a request for a Komatsu PC300LC-8M0

Does a Komatsu PC300LC-8M0 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Komatsu PC300LC-8M0 is 3.29 m wide against a 2.34 m door opening and 3.15 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
11.14 m
Width
3.29 m
Height
3.15 m
Weight
32.2 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Komatsu PC300LC-8M0

For the people who run one: codes, charts and calculators that fit an excavator.

Same class: 30 ton excavators

30 ton excavators with an operating weight of 25 to 35 t, lightest first. The Komatsu PC300LC-8M0 is 4 of 5; every figure is the maker's.

  1. 1Komatsu PC220LC-8M025.5 t
  2. 2Cat 32526.4 t
  3. 3Cat 33031.4 t
  4. 4Komatsu PC300LC-8M0This page32.2 t
  5. 5SANY SY33533.6 t

Popular Komatsu excavator models

Komatsu PC300LC-8M0 fault codes and serial number

All Komatsu fault codesFind the year from a Komatsu serial number

More Komatsu PC300LC-8M0 questions

How much horsepower does the Komatsu PC300LC-8M0 have?

250 hp (187 kW) net, ISO 9249 / SAE J1349, at 1,950 rpm.

What size bucket does a Komatsu PC300LC-8M0 take?

1.4 m³ (1.83 yd³) is the bucket the maker quotes its figures with; other sizes fit.

How far can a Komatsu PC300LC-8M0 reach?

Its maximum reach at ground level is 10.92 m (35.8 ft).

How tall is a Komatsu PC300LC-8M0?

3.15 m (10 ft 4 in) overall.

How wide is a Komatsu PC300LC-8M0?

3.29 m (10 ft 10 in) overall.

How high can a Komatsu PC300LC-8M0 dig?

Its maximum digging height is 10.1 m (33.1 ft), with 6470 mm boom and 3185 mm arm.

What is the tail swing radius of a Komatsu PC300LC-8M0?

3.45 m (11.3 ft).

What is the hydraulic flow of a Komatsu PC300LC-8M0?

535 L/min (141.3 US gpm), maximum.

What are the Komatsu PC300LC-8M0's main competitors?

The machines nearest it in size are the Cat 330, the SANY SY335 and the Hitachi ZX350. Each has a side-by-side comparison on EquipmentsFinder.

Is the Komatsu PC300LC-8M0 sold in the UAE?

Yes. The Komatsu PC300LC-8M0 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Komatsu PC300LC-8M0 used for?

A crawler excavator: a digging arm and bucket on a cab that turns all the way round, on tracks for grip and stability. Typical jobs: digging foundations and trenches, loading dump trucks, demolition with a breaker, lifting pipes into trenches.

Embed this spec card

The Komatsu PC300LC-8M0's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/komatsu-pc300" title="Komatsu PC300LC-8M0 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/komatsu-pc300">Komatsu PC300LC-8M0 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Komatsu PC300LC-8M0 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.