EF Logo

Komatsu PC210 vs Komatsu PC220LC-8M0

The Komatsu PC220LC-8M0 is the heavier machine, at 25.5 t against 20.5 t.

The Komatsu PC210 is ahead on: dumps higher, more hydraulic flow, turns tighter, narrower to transport, lower to transport. The Komatsu PC220LC-8M0 is ahead on: more power, digs deeper, reaches further, more digging or pushing force.

Below, every figure both makers publish sits side by side, with the Komatsu PC210 and the Komatsu PC220LC-8M0 drawn to the same scale from their dimension drawings.

  1. Komatsu PC210, side view

    Komatsu · excavator

    Komatsu PC210

    Full specsPDF

  2. Komatsu PC220LC-8M0, side view

    Komatsu · excavator

    Komatsu PC220LC-8M0

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureKomatsu PC210Komatsu PC220LC-8M0
Operating weight20,500 kg25,500 kg
Gross powerHigher is better123 kW129 kW+5%
Max digging depthHigher is better6.515 m6.92 m+6%
Max digging reachHigher is better9.86 m10.18 m+3%
Max dumping heightHigher is better7.16 m+2%7.035 m
Bucket digging forceHigher is better149 kN152 kN+2%
Pump flowHigher is better475 L/min+8%439 L/min
Tail swing radiusLower is better2.9 m+1%2.94 m
Overall widthLower is better2.8 m+15%3.28 m
Overall height (to top of boom)Lower is better3.005 m+6%3.185 m
Overall length9.55 m9.885 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length9.55 m9.885 m
Length on ground (transport)4.825 m5.39 m
Overall height (to top of boom)3.005 m3.185 m
Overall width2.8 m3.28 m
Overall height (to top of cab)3.045 m3.055 m
Ground clearance, counterweight1.085 m1.1 m
Ground clearance (minimum)0.44 m0.44 m
Tail swing radius2.9 m2.94 m
Ground contact length3.275 m3.845 m
Track length4.07 m4.64 m
Track gauge2.2 m2.58 m
Width of crawler2.8 m3.18 m
Shoe width0.6 m0.6 m
Grouser height0.026 m0.026 m
Machine cab height2.095 m2.11 m
Machine cab width2.71 m2.71 mIncluding handrail
Swing centre to rear end2.86 m2.905 m

Performance

Max digging height10.065 m10 m
Max dumping height7.16 m7.035 m
Max digging depth6.515 m6.92 m
Max vertical wall digging depth5.81 m6.01 m
Max digging reach9.86 m10.18 m
Max reach at ground level9.68 m10.02 m
Min front swing radius2.99 m3.45 mRow H; the brochure labels it 'Max. swing radius', but 3,450 mm is the minimum front swing radius (PC220/LC-8M0)
Bucket capacity1 m³1 m³SAE heaped factory bucket, with 3045 mm arm
Bucket digging force149 kN152 kNSAE rating, at power max; 15,500 kg
Arm digging force108 kN119 kNSAE rating, at power max; 12,100 kg
Swing speed12.4 min-111.7 min-1
Top speed5.5 km/hAuto-shift; mid 4.1 km/h, low 3.0 km/h5.5 km/hMid 4.2 km/h, Low 3.1 km/h (Auto-Shift)
Travel speed (low)3 km/h3.1 km/hAuto-Shift low
Max drawbar pull178 kN18,200 kgf202 kN20,570 kg
Gradeability35°70%35°70%

Weight

Operating weight20,500 kg25,500 kgIncludes 5850 mm one-piece boom, 3045 mm arm, 600 mm shoes, full fuel tank, operator, standard equipment, KGA quick hitch and 1200 mm KGA bucket; 24,400 kg for PC220-8M0
Ground pressure46.8 kPaPC210-10M0, 600 mm shoes; 0.48 kgf/cm20.52 kg/cm2PC220LC-8M0, 600 mm shoes; 0.56 kg/cm2 for PC220-8M0

Engine

Engine modelKomatsu SAA6D107E-1Komatsu SAA6D107E-1
EmissionsEU Stage 3A emission equivalentEPA Tier 3 and EU Stage 3A emissions equivalent
Cylinders66
Bore107 mm107 mm
Stroke124 mm124 mm
Displacement6.7 L6.7 L
Gross power123 kW (165 HP)SAE J1995, at 2000 min-1129 kW (173 HP)SAE J1995, at 2000 min-1
Net power123 kW (165 HP)123 kW (164 HP)ISO 9249 / SAE J1349, at 2000 min-1
AspirationTurbocharged, aftercooled; mechanical fan with viscous clutchTurbocharged, aftercooled

Hydraulics

Pump flow475 L/min439 L/minMaximum
Max pressure37.3 MPa (380 kgf/cm2)37.3 MPa (380 kg/cm2)Implement and travel circuit relief valve setting
Max pressure, travel373 bar37.3 MPa (380 kgf/cm2).37.3 MPa (380 kg/cm2)Relief valve setting, travel circuit
Max pressure, swing28.9 MPa (295 kgf/cm2)Relief valve setting28.9 MPa (295 kg/cm2)Relief valve setting
Pilot circuit pressure32 bar3.2 MPa (33 kgf/cm2).3.2 MPa (33 kg/cm2)
Boom cylinders2 - bore 120 mm, stroke 1,334 mm, rod 85 mm2 - bore 130 mm, stroke 1335 mm, rod 90 mm
Arm cylinder1 - bore 135 mm, stroke 1,490 mm, rod 95 mm1 - bore 145 mm, stroke 1635 mm, rod 100 mm
Bucket cylinder1 - bore 115 mm, stroke 1,120 mm, rod 80 mm (1.84 m arm: bore 125 mm, stroke 1,110 mm, rod 85 mm)1 - bore 130 mm, stroke 1020 mm, rod 90 mm

Undercarriage

Track rollers (each side)7PC210-10M0 (LC: 9)108 on PC220-8M0
Carrier rollers (each side)22
Track shoes (each side)45PC210-10M0 (LC: 49)5147 on PC220-8M0

Service capacities

Fuel tank400 L400 L
Cooling system21.8 LCoolant19.9 LCoolant
Engine oil, with filter23.1 LRefill capacity ("Engine")23.1 LRefill capacity
Final drive (each)3.3 L5 L
Swing drive5.3 L7.2 L
Hydraulic tank135 L135 L

Service intervals

Hydraulic oil filter2,500 hoursKomatsu: 2.5 times the earlier 1,000 h1,000 hours

Sources: Komatsu PC210/210LC-10M0 brochure CEN00820-03 (Komatsu Middle East) · Komatsu PC200/LC-8M0, PC220/LC-8M0 brochure ZESS003200-01 (Komatsu Australia, 2015)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m
Komatsu PC210Komatsu PC220LC-8M0Same scale, front edges and ground lined up.

Komatsu PC210 vs Komatsu PC220LC-8M0: questions

Which is bigger, the Komatsu PC210 or Komatsu PC220LC-8M0?

By operating weight the Komatsu PC220LC-8M0 is the biggest at 25.5 t, then the Komatsu PC210 at 20.5 t.

Which has more power, the Komatsu PC210 or Komatsu PC220LC-8M0?

The Komatsu PC220LC-8M0: Komatsu PC210 123 kW (165 HP), Komatsu PC220LC-8M0 129 kW (173 HP) (gross power), a 5% difference.

Which digs deeper, the Komatsu PC210 or Komatsu PC220LC-8M0?

The Komatsu PC220LC-8M0: Komatsu PC210 6.515 m, Komatsu PC220LC-8M0 6.92 m (max digging depth), a 6% difference.

Which reaches further, the Komatsu PC210 or Komatsu PC220LC-8M0?

The Komatsu PC220LC-8M0: Komatsu PC210 9.86 m, Komatsu PC220LC-8M0 10.18 m (max digging reach), a 3% difference.

Which turns tighter, the Komatsu PC210 or Komatsu PC220LC-8M0?

The Komatsu PC210: Komatsu PC210 2.9 m, Komatsu PC220LC-8M0 2.94 m (tail swing radius), a 1% difference.

Which is narrower to transport, the Komatsu PC210 or Komatsu PC220LC-8M0?

The Komatsu PC210: Komatsu PC210 2.8 m, Komatsu PC220LC-8M0 3.28 m (overall width), a 15% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.