J1939 · Aftertreatment - SCR/DEF
SPN 3363 Fault Code
Aftertreatment 1 diesel exhaust fluid tank heater
What does SPN 3363 mean?
The heater in the DEF tank that thaws frozen fluid and keeps it liquid, usually engine-coolant-fed through a valve. The aftertreatment control switches it based on temperature. How urgent it is depends on the FMI after SPN 3363 - pick it below. Check first: command the tank heater in the service tool and watch the tank temperature climb when the engine is hot.
- SPN 3363
- Aftertreatment 1 diesel exhaust fluid tank heater
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 3363 - pick it below.
What should I check first?
Command the tank heater in the service tool and watch the tank temperature climb when the engine is hot
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 3363?
You'll notice: The DEF tank heater is not behaving, so the fluid can freeze in cold weather or overheat in a hot tank.
Find the number shown after SPN 3363 on your display.
- 0SPN 3363 FMI 0: DEF tank temperature is highReal conditionDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
- 1SPN 3363 FMI 1: DEF tank temperature is lowReal conditionDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
- 2SPN 3363 FMI 2: Data is erratic, intermittent or incorrectErratic or implausibleMack MP8, Mack MP7, Volvo D13
- 3SPN 3363 FMI 3: Signal voltage is above normal, or the circuit is shorted to a high sourceShorted highCummins ISX15, Detroit DD15, Detroit DD13, Detroit DD13 Gen 5 and 4 more
- 4SPN 3363 FMI 4: Signal voltage is below normal, or the circuit is shorted to a low sourceShorted lowCummins ISX15, Mack MP8, Mack MP7, Volvo D13
- 5SPN 3363 FMI 5: Current is below normal, or the circuit is openOpen circuitCummins ISX15, Detroit DD15, Detroit DD13, Detroit DD13 Gen 5 and 4 more
- 7SPN 3363 FMI 7: The mechanical part is not responding or is out of adjustmentPart or controllerCummins ISX15
- 16SPN 3363 FMI 16: Value is above the normal range, moderately severe levelReal conditionCummins ISX15
- 18SPN 3363 FMI 18: Value is below the normal range, moderately severe levelReal conditionCummins ISX15
- 19SPN 3363 FMI 19: The DEF tank heating message arrived in error over CANLost messagePACCAR MX-13
Checks
0 of 5 done
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
How urgent SPN 3363 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- Heater control circuit open or shorted, such as a chafed lead at the tank or a corroded plug
- Coolant-fed heater with the shutoff valve stuck closed or the coolant line blocked, so no heat reaches the tank
- Heater element failed in the sender unit
- Tank temperature sensor reading wrongly, so the heater is switched at the wrong time
Other Aftertreatment - SCR/DEF codes
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list names SPN 3363 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
