EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 4094 Fault Code

NOx limits exceeded due to insufficient reagent quality

What does SPN 4094 mean?

A status that the ECM sets when NOx stays above limits and the cause is poor DEF quality. It feeds the SCR inducement strategy. How urgent it is depends on the FMI after SPN 4094 - pick it below. Check first: test a sample with a refractometer and compare it with the DEF concentration figure.

FaultActiveSPN 4094FMI --J1939 engine ECU
SPN 4094
NOx limits exceeded due to insufficient reagent quality
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 4094 - pick it below.

What should I check first?

Test a sample with a refractometer and compare it with the DEF concentration figure

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 4094?

You'll notice: The ECM judges that NOx is over its limit because the DEF in the tank is not good enough, and it starts operator inducement.

Find the number shown after SPN 4094 on your display. FMI 31 has its own page with causes and checks.

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 4094 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Wrong fluid in the DEF tank, such as water, diesel or a different additive
  • DEF diluted with water or broken down by long storage in heat
  • Contaminated tank, supply line or pump module after an old or dirty fill
  • DEF quality sensor reading wrongly, so good fluid is judged poor

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list names SPN 4094 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.