J1939 · Aftertreatment - SCR/DEF
SPN 4334 Fault Code
Aftertreatment 1 diesel exhaust fluid dosing absolute pressure
What does SPN 4334 mean?
Pressure of the DEF in the dosing line, read by a pressure sensor in the dosing unit. The control uses it to regulate the pump and judge dosing. How urgent it is depends on the FMI after SPN 4334 - pick it below. Check first: compare the DEF pressure with the commanded pressure when the pump primes; a full-scale value means a circuit fault.
- SPN 4334
- Aftertreatment 1 diesel exhaust fluid dosing absolute pressure
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 4334 - pick it below.
What should I check first?
Compare the DEF pressure with the commanded pressure when the pump primes; a full-scale value means a circuit fault
Then 3 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 4334?
You'll notice: DEF pressure is misread, so the ECM cannot regulate the DEF pump or confirm the dosing pressure, and a derate or an inducement warning can follow.
Find the number shown after SPN 4334 on your display. 2 of them have their own page with causes and checks.
- 1SPN 4334 FMI 1: Value is below the normal range, most severe levelReal conditionMack MP8, Mack MP7, Volvo D13
- 2SPN 4334 FMI 2: Data is erratic, intermittent or incorrectErratic or implausibleCummins ISX15
- 3SPN 4334 FMI 3: Signal voltage is above normal, or the circuit is shorted to a high sourceShorted highCummins ISX15, Detroit DD15, Detroit DD13, Detroit DD13 Gen 5 and 2 more
- 4SPN 4334 FMI 4: Signal voltage is below normal, or the circuit is shorted to a low sourceShorted lowCummins ISX15, Detroit DD15, Detroit DD13, Detroit DD13 Gen 5 and 5 more
- 5SPN 4334 FMI 5: Current is below normal, or the circuit is openOpen circuitMack MP8, Mack MP7, Volvo D13
- 7SPN 4334 FMI 7: DEF pressure is lowPart or controllerDetroit DD15
- 11SPN 4334 FMI 11: Pump module pressure failed to stabiliseOtherPACCAR MX-13
- 16SPN 4334 FMI 16: Value is above the normal range, moderately severe levelReal conditionCummins ISX15
- 17SPN 4334 FMI 17: DEF purge pressure is highReal conditionDetroit DD15
- 18SPN 4334 FMI 18: Value is below the normal range, moderately severe levelReal conditionCummins ISX15
Checks
0 of 4 done
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
How urgent SPN 4334 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- Signal high or open: broken or backed-out pin, an open sensor return, or the signal shorted to the 5 V reference at the DEF pressure sensor
- Signal low or shorted: signal wire grounded, or the 5 V reference lost, so the DEF pressure sensor reads at the bottom of its range
- Real condition: pump worn or frozen DEF lines giving real pressure outside range
- Real condition: blocked DEF filter or doser causing a real pressure error
1 more causeFewer causes
- Sensor: dEF crystals partly blocking the sensor port, making the pressure reading jump
Other Aftertreatment - SCR/DEF codes
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list names SPN 4334 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
