EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 4356 Fault Code

DEF line heater 3

What does SPN 4356 mean?

Electric heater on the third heated DEF hose, the stretch that feeds the DEF doser at the exhaust. The aftertreatment control module drives it. How urgent it is depends on the FMI after SPN 4356 - pick it below. Check first: inspect the connector at the doser end for green corrosion and wet pins before testing anything else.

FaultActiveSPN 4356FMI --J1939 engine ECU
SPN 4356
DEF line heater 3
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 4356 - pick it below.

What should I check first?

Inspect the connector at the doser end for green corrosion and wet pins before testing anything else

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 4356?

You'll notice: The last stretch of hose to the doser may freeze, so injection is late or missing in the cold, SCR efficiency falls and a NOx warning can follow.

Find the number shown after SPN 4356 on your display.

  • 3SPN 4356 FMI 3: DEF line heater 3 signal voltage is above normal, or the circuit is shorted to a high sourceShorted highDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5 and 3 more
  • 4SPN 4356 FMI 4: DEF line heater 3 signal voltage is below normal, or the circuit is shorted to a low sourceShorted lowDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5 and 3 more
  • 5SPN 4356 FMI 5: Current in the DEF line heater 3 circuit is below normal, or the circuit is openOpen circuitDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5 and 4 more
  • 6SPN 4356 FMI 6: Current in the DEF line heater 3 circuit is above normal, or the circuit is groundedShorted lowPACCAR MX-13

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 4356 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Corroded heater pins at the hose-to-doser connector, exposed to road spray and exhaust heat
  • Heater lead heat-damaged where it passes the doser bracket
  • Open element inside the hose after repeated heat cycles
  • Relay or fuse feeding the doser line heaters failed

Source

Detroit Diesel DD15 2017-2020 fault codes list (Diesel Laptops)

This list names SPN 4356 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Detroit DD13, Detroit DD15, PACCAR MX-13, Mack MP7, Mack MP8, Volvo D13; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.