EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 4376 Fault Code

DEF return valve

What does SPN 4376 mean?

Valve at the DEF pump module that lets fluid flow back to the tank so the pump can purge the line at shutdown and build pressure at start. The aftertreatment control module drives it. How urgent it is depends on the FMI after SPN 4376 - pick it below. Check first: measure the coil resistance at the valve connector and compare it with the manual value.

FaultActiveSPN 4376FMI --J1939 engine ECU
SPN 4376
DEF return valve
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 4376 - pick it below.

What should I check first?

Measure the coil resistance at the valve connector and compare it with the manual value

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 4376?

You'll notice: DEF pressure may not build or purge correctly, so dosing is erratic and supply-pressure or priming codes can appear.

Find the number shown after SPN 4376 on your display.

  • 3SPN 4376 FMI 3: DEF return valve signal voltage is above normal, or the circuit is shorted to a high sourceShorted highCummins ISX15, Mack MP8, Mack MP7, PACCAR MX-13 and 1 more
  • 4SPN 4376 FMI 4: DEF return valve signal voltage is below normal, or the circuit is shorted to a low sourceShorted lowCummins ISX15, Mack MP8, Mack MP7, PACCAR MX-13 and 1 more
  • 5SPN 4376 FMI 5: Current in the DEF return valve circuit is below normal, or the circuit is openOpen circuitCummins ISX15, Mack MP8, Mack MP7, Volvo D13
  • 7SPN 4376 FMI 7: The DEF return valve is not responding or is out of adjustmentPart or controllerCummins ISX15, Mack MP8, Mack MP7, PACCAR MX-13 and 1 more

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 4376 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Return valve coil open or shorted
  • Crystallised urea holding the valve plunger from moving
  • Corroded pins at the pump module connector
  • Harness chafed against the module bracket

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list names SPN 4376 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15, PACCAR MX-13, Mack MP7, Mack MP8, Volvo D13; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.