J1939 · Aftertreatment - SCR/DEF
SPN 4794 Fault Code
SCR catalyst system presence
What does SPN 4794 mean?
Check that the SCR catalyst is in place and that the exhaust path past it behaves as expected. How urgent it is depends on the FMI after SPN 4794 - pick it below. Check first: inspect the exhaust for the catalyst canister and any non-standard parts.
- SPN 4794
- SCR catalyst system presence
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 4794 - pick it below.
What should I check first?
Inspect the exhaust for the catalyst canister and any non-standard parts
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 4794?
You'll notice: A missing or bypassed SCR catalyst is suspected, so the engine can derate and the emissions lamp lights.
Find the number shown after SPN 4794 on your display.
- 31SPN 4794 FMI 31: The condition behind the SCR catalyst system presence fault exists and is activeReal conditionCummins ISX15, PACCAR MX-13
Checks
0 of 5 done
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
How urgent SPN 4794 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- Catalyst removed or replaced with a dummy
- Exhaust piping modified
- Temperature sensors giving wrong readings
- NOx sensors faulty
Other Aftertreatment - SCR/DEF codes
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list names SPN 4794 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Cummins ISX15, PACCAR MX-13; same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
