EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 6802 Fault Code

Aftertreatment 1 diesel exhaust fluid dosing system frozen

What does SPN 6802 mean?

A status that the DEF dosing system is frozen and being thawed. The aftertreatment control uses it to delay dosing until the fluid is liquid. How urgent it is depends on the FMI after SPN 6802 - pick it below. Check first: let the engine run until the DEF system temperatures rise and watch the frozen status clear in the service tool.

FaultActiveSPN 6802FMI --J1939 engine ECU
SPN 6802
Aftertreatment 1 diesel exhaust fluid dosing system frozen
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 6802 - pick it below.

What should I check first?

Let the engine run until the DEF system temperatures rise and watch the frozen status clear in the service tool

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 6802?

You'll notice: The ECM reports the DEF dosing system as frozen, so no DEF can be injected until it thaws.

Find the number shown after SPN 6802 on your display.

  • 31SPN 6802 FMI 31: A condition exists: the ECM is flagging a defined state rather than a circuit failureReal conditionCummins ISX15

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 6802 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Cold ambient temperature freezing the DEF in the dosing unit or lines overnight
  • DEF tank or line heaters not working, so the fluid does not thaw after start-up
  • Heater control or temperature sensor fault holding the heaters off
  • Over-diluted DEF that freezes at a higher temperature than normal DEF

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list names SPN 6802 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.