J1939 · Aftertreatment - SCR/DEF
SPN 3056 Fault Code
SCR inlet NOx sensor
What does SPN 3056 mean?
NOx sensor upstream of the SCR catalyst. It reports engine-out NOx to the aftertreatment control module over the data link and the module uses it to calculate the DEF dose. How urgent it is depends on the FMI after SPN 3056 - pick it below. Check first: read the inlet NOx value at idle and compare it with the outlet sensor; both should be plausible for the load.
- SPN 3056
- SCR inlet NOx sensor
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 3056 - pick it below.
What should I check first?
Read the inlet NOx value at idle and compare it with the outlet sensor; both should be plausible for the load
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 3056?
You'll notice: The system may fall back to a default dose, NOx readings are unreliable, and the dash may show an exhaust or emissions warning.
Find the number shown after SPN 3056 on your display.
- 2SPN 3056 FMI 2: SCR inlet NOx sensor data is erratic, intermittent or incorrectErratic or implausibleDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
Checks
0 of 5 done
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
How urgent SPN 3056 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- NOx sensor probe degraded by age or contamination
- Sensor control unit on the sensor failed
- Connector or lead heat-damaged near the exhaust
- Exhaust leak before the sensor distorting its reading
Other Aftertreatment - SCR/DEF codes
Source
Detroit Diesel DD15 2017-2020 fault codes list (Diesel Laptops)
This list names SPN 3056 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Detroit DD13, Detroit DD15; same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
