EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 4364 Fault Code

Aftertreatment SCR catalyst conversion efficiency

What does SPN 4364 mean?

How much NOx the SCR catalyst removes, calculated from inlet and outlet NOx readings. It is used to detect a worn catalyst, poor DEF or a dosing fault. How urgent it is depends on the FMI after SPN 4364 - pick it below. Check first: check the DEF level and test the concentration with a refractometer.

FaultActiveSPN 4364FMI --J1939 engine ECU
SPN 4364
Aftertreatment SCR catalyst conversion efficiency
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 4364 - pick it below.

What should I check first?

Check the DEF level and test the concentration with a refractometer

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 4364?

You'll notice: The SCR is not removing as much NOx as it should, so the ECM sets an efficiency fault.

Find the number shown after SPN 4364 on your display. 3 of them have their own page with causes and checks.

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 4364 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Poor DEF: wrong, diluted or old fluid, or an empty tank
  • DEF doser blocked or crystallised, or a DEF line leak, so too little fluid is injected
  • NOx sensors faulty or contaminated, giving a false efficiency reading
  • Catalyst aged, damaged or contaminated, or an exhaust leak before the sensor

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list names SPN 4364 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.