EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 4364 FMI 18

SCR conversion efficiency low, moderately severe

What does SPN 4364 FMI 18 mean?

The SCR is removing less NOx than expected at the moderately severe level. If left, the ECM starts an inducement derate and speed limit. Urgency: check soon - the machine may derate or limit a function. Check first: test the DEF concentration with a refractometer and check the DEF level.

FaultCheckSPN 4364FMI 18J1939 engine ECU
FMI 18
Below normal, moderately severe

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Test the DEF concentration with a refractometer and check the DEF level

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Checks

0 of 5 done

Causes

  • DEF too weak, old or low, so the dose cannot cut enough NOx
  • Dosing valve partly blocked with crystals, so too little DEF is injected
  • Faulty NOx sensors giving a false efficiency reading
  • Aged catalyst or an exhaust leak between the NOx sensors

How it failed

You'll notice: The SCR removes less NOx than expected at the moderately severe level.

Real conditionRead from FMI 18: below normal, moderately severe

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list shows SPN 4364 with FMI 18. The guidance on this page is general, not taken from it.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.