EF Logo

mini excavatormade by John DeereUSA, Global

John Deere 60 P-TierSpecs, weight and dimensions

Weight
6.18 t
6,180 kg
Dig depth
3.77 m
12 ft 4 in
Est. new price
~$87k

Quick answer

The John Deere 60 P-Tier is a 6.18-tonne mini excavator with a Yanmar 4TNV98C-WHB engine rated at 39.6 kW (53 hp). Its dig depth is 3.77 m and its bucket is 0.19 m³. It suits trenching for services, landscaping and garden work and footings and foundations. Its rivals include the Bobcat E60 (5.59 t) and the Takeuchi TB260 (5.85 t).

John Deere 60 P-Tier (illustration)

How much does a John Deere 60 P-Tier weigh?

The John Deere 60 P-Tier weighs 6.18 tonnes (6,180 kg, 13,620 lb) in working order, with fuel, operator and standard attachment. That is 11% heavier than the Bobcat E60 (5.59 t) and 6% heavier than the Takeuchi TB260 (5.85 t). It puts 34 kPa (4.9 psi) canopy / 35 kPa (5.1 psi) cab of pressure on the ground.

What engine is in the John Deere 60 P-Tier?

The John Deere 60 P-Tier has a Yanmar 4TNV98C-WHB engine rated at 39.6 kW (53 hp) net, ISO 9249, at 2,000 rpm. It displaces 3.3 L (203 cu in). Emissions: EPA Final Tier 4 / EU Stage IV. The fuel tank holds 120 L (31.7 gal) and the engine takes 11.2 L (3 gal) of oil.

How deep can a John Deere 60 P-Tier dig?

The John Deere 60 P-Tier's max digging depth is 3.77 m. In imperial units the digging depth is 12 ft 4 in. The sheet notes: standard arm; 4.12 m (13 ft 6 in) with long arm. On the same row of their sheets, the Bobcat E60 shows 3.981 m and the Takeuchi TB260 shows 3.895 m.

What are the John Deere 60 P-Tier dimensions?

The John Deere 60 P-Tier is 5.76 m (18 ft 11 in) long, 2.00 m (6 ft 7 in) wide and 2.54 m (8 ft 4 in) high. As it stands it is too big for the door of a standard shipping container. The Bobcat E60 is 5.54 m long, 1.96 m wide and 2.54 m high.

John Deere 60 P-Tier vs Bobcat E60: what is the difference?

The John Deere 60 P-Tier is 11% heavier than the Bobcat E60: 6.18 t against 5.59 t. The John Deere 60 P-Tier carries more fuel (120 L against 71.9 L), is faster (4.8 km/h against 4.5 km/h) and is lower to transport (2.54 m against 2.543 m). Both sets of figures are the makers’ own, for the builds on our sheets.

These figures are for the 60 P-Tier. The 60G is not covered here and has figures of its own, so check the serial plate before using these for one.

John Deere 60 P-Tier dimensions

John Deere 60 P-Tier, side view with dimensions (illustration)2.54 m1.99 m5.76 m
Side view
John Deere 60 P-Tier, front view (illustration)2 m
Front view
Overall height
2.54 m
Track on ground
1.99 m
Overall length
5.76 m
Overall width
2 m

Illustration; figures from the maker's sheet.

How big is the John Deere 60 P-Tier?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

John Deere 60 P-Tier drawn to scale beside a person and a pickup truck. The John Deere 60 P-Tier is 5.76 m long - about 1.1 pickup trucks - and 2.54 m tall, 1.5 times a person's height.John Deere 60 P-Tier5.76 × 2.54 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The John Deere 60 P-Tier is 5.76 m long - about 1.1 pickup trucks - and 2.54 m tall, 1.5 times a person's height.

John Deere 60 P-Tier specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

51 figures in 8 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length5.76 mTransport length, standard 1,500 mm arm; 5.79 m (19 ft 0 in) with long arm[1] p.6
Overall height (to top of cab)2.54 mCanopy or cab[1] p.7
Upperstructure width1.93 m[1] p.7
Width of crawler2 mUndercarriage width; blade width also 2.00 m[1] p.7
Shoe width0.4 mRubber track[1] p.7
Ground clearance (minimum)0.325 m[1] p.7
Dimensions, part 2 of 2
FigureValue (metric)Source
Tail swing radius1.3 mStandard counterweight; 1.41 m (4 ft 8 in) with additional counterweight[1] p.7
Engine cover height1.6 m[1] p.7
Track length on ground1.99 mSprocket centre to idler centre[1] p.7
Track length2.5 mUndercarriage length[1] p.7
Ground clearance, counterweight0.62 m[1] p.7

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Max digging height5.96 mStandard arm; 6.19 m (20 ft 4 in) with long arm[1] p.6
Max dumping height4.17 mStandard arm; 4.41 m (14 ft 6 in) with long arm[1] p.6
Max digging depth3.77 mStandard arm; 4.12 m (13 ft 6 in) with long arm[1] p.6
Max digging reach6.23 mStandard arm; 6.56 m (21 ft 6 in) with long arm[1] p.6
Minimum front swing radius2.45 mStandard arm; 2.54 m (8 ft 4 in) with long arm and additional counterweight[1] p.6
Bucket capacity0.19 m³Standard bucket, 762 mm (30 in) wide, 204 kg[1] p.7
Bucket digging force41 kNISO, HCM bucket with 788.1 mm tip radius[1] p.6
Arm digging force31 kNISO; 27.0 kN (6,060 lbf) with long arm[1] p.6
Performance, part 2 of 2
FigureValue (metric)Source
Travel speed (high)4.8 km/h[1] p.6
Travel speed (low)2.9 km/h[1] p.6
Swing speed9.5 rpmRight and left[1] p.6
Boom swing, left80°[1] p.6
Boom swing, right60°[1] p.6
Ground pressure34 kPa (4.9 psi) canopy / 35 kPa (5.1 psi) cabStandard arm, 400 mm rubber track; 36 kPa (5.2 psi) with long arm and additional counterweight[1] p.6
Lift capacity over front, ground level at 3.0 m radius3,880 kgCab, standard arm, standard counterweight, blade down, ISO 10567; long arm 3,810 kg[1] p.7
Lift capacity over side, ground level at 3.0 m radius1,500 kgCab, standard arm, rubber track, standard counterweight; 1,690 kg with additional counterweight[1] p.7

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Operating weight6,180 kgCab, rubber track, standard arm; 6,010 kg (13,250 lb) with canopy. Includes 745 kg counterweight, 762 mm 204 kg bucket, full fuel tank and 75 kg operator[1] p.6
Operating weight (canopy)6,010 kgRubber track[1] p.6
Operating weight (steel track, cab)6,280 kgSteel track; canopy 6,110 kg (13,470 lb)[1] p.6
Operating weight (long arm, cab)6,210 kgRubber track, with additional counterweight; canopy 6,040 kg (13,320 lb); steel track cab 6,310 kg (13,910 lb)[1] p.6
Weight, part 2 of 2
FigureValue (metric)Source
Counterweight745 kgStandard, including hardware[1] p.6
Additional counterweight270 kgFitted with the long arm[1] p.6
Optional angle blade458 kgAdded weight[1] p.6

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelYanmar 4TNV98C-WHB[1] p.6
EmissionsEPA Final Tier 4 / EU Stage IV[1] p.6
Displacement3.3 L[1] p.6
Engine, part 2 of 2
FigureValue (metric)Source
Net power39.6 kW (53 hp)ISO 9249, at 2,000 rpm[1] p.6
Alternator55 amp[1] p.6

Hydraulics

Hydraulics
FigureValue (metric)Source
Hydraulic systemClosed-centre load sensing, 1 variable-displacement pump; hydraulic pilot-operated controls[1] p.7
Pump flow144 L/minMaximum rated flow[1] p.6
Auxiliary flow92 L/minMaximum rated flow[1] p.6

Undercarriage

Undercarriage
FigureValue (metric)Source
Track typeRubber track, 400 mm (16 in); steel track with triple semi-grousers or rubber crawler pad optional[1] p.7
Powertrain2-speed propel with automatic shift; each track driven by a hydrostatic axial-piston motor through a 2-stage planetary reduction[1] p.6

Blade

Blade, part 1 of 2
FigureValue (metric)Source
Blade width2 mBackfill blade; hydraulic angle blade optional[1] p.7
Blade height0.42 m[1] p.7
Blade, part 2 of 2
FigureValue (metric)Source
Max blade lift above ground0.45 m[1] p.7
Max blade drop below ground0.39 m[1] p.7

Front attachment

Front attachment
FigureValue (metric)Source
Boom length2.965 m[1] p.7
Arm length1.5 mStandard arm[1] p.7
Arm length (long arm)1.85 mIncludes additional 270 kg counterweight[1] p.7

Build: John Deere 60 P-Tier compact excavator (the current model; it replaced the 60G; reduced tail swing, Yanmar 4TNV98C-WHB Final Tier 4 / Stage IV) from the North American spec sheet ME60PAU (23-07). Dimensions and ranges are for the cab machine with the standard 1,500 mm arm, 400 mm rubber track and standard counterweight unless noted.

  1. [1]John Deere 60 P-Tier Compact Excavator brochure ME60PAU (23-07)

John Deere 60 P-Tier service

What each system holds and when John Deere says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
120 L31.7 gal
Engine oil, with filter
11.2 L3 gal
Cooling system
7.7 L2 gal
Hydraulic tank
80 L21.1 gal

John Deere 60 P-Tier against its rivals

The mini excavators nearest in weight from other makers, figure by figure, each shown at the same scale.

John Deere 60 P-Tier, Bobcat E60, Takeuchi TB260, Komatsu PC70-8: specifications side by side
FigureJohn Deere 60 P-Tierthis pageBobcat E60 specsTakeuchi TB260 specsKomatsu PC70-8 specs
Operating weight6,180 kg5,586 kg5,846 kg6,590 kg
Net power39.6 kW (53 hp)not on its sheetnot on its sheet48.5 kW (65 HP)
Max vertical wall digging depthnot on its sheetnot on its sheet2.98 m3.505 m
Max digging reach6.23 mnot on its sheetnot on its sheet6.36 m
Max dumping height4.17 m4.347 m4.22 m5.015 m
Bucket capacity0.19 m³not on its sheetnot on its sheet0.3 m³
Bucket digging force41 kN46 kN43 kN55 kN
Pump flow144 L/minnot on its sheetnot on its sheet172 L/min
Fuel tank120 L71.9 L81 L130 L
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • The John Deere 60 P-Tier leads none of these figures, so the choice comes down to price, hours and dealer support.
  • Pick the Bobcat E60 if the lightest machine matters: at 5.59 t it weighs the least of the 4, and it leads no other figure here.
  • Pick the Komatsu PC70-8 if you need more power (48.5 kW), a deeper dig (3.505 m) and longer reach (6.36 m).

John Deere 60 P-Tier prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new John Deere 60 P-Tier costs about $79,000 to $94,000 (USD), base machine before options, freight and tax - an estimate from new units for sale, checked November 2026. Sources: sloans.com, evergladesfarmequipment.com, equipbook.ai.

Typical hire, per daymedian of 28

AED 1,225 /day

No priced John Deere 60 P-Tier for hire yet: this is all mini excavators

Low AED 800High AED 1,800

No John Deere 60 P-Tier for rent listed right now.

Request a John Deere 60 P-Tier

Does a John Deere 60 P-Tier fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the John Deere 60 P-Tier is 2.54 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
5.76 m
Width
2 m
Height
2.54 m
Weight
6.2 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a John Deere 60 P-Tier

For the people who run one: codes, charts and calculators that fit a mini excavator.

Ranked: Mini excavators by dig depth

By maximum dig depth, deepest-digging first. The John Deere 60 P-Tier is 12 of 25; every figure is the maker's.

  1. 8Bobcat E603.98 m
  2. 9Takeuchi TB2603.9 m
  3. 10Kubota KX057-43.87 m
  4. 11Komatsu PC56-73.8 m
  5. 12John Deere 60 P-TierThis page3.77 m
  6. 13Cat 306 CR3.71 m
  7. 14Kubota U55-53.63 m
  8. 15John Deere 50 P-Tier3.53 m
  9. 16Bobcat E503.48 m

Showing 8 to 16 of 25, the machines nearest the John Deere 60 P-Tier by maximum dig depth.

Popular John Deere mini excavator models

John Deere 60 P-Tier fault codes and serial number

All John Deere fault codesFind the year from a John Deere serial number

More John Deere 60 P-Tier questions

How much horsepower does the John Deere 60 P-Tier have?

53 hp (39.6 kW) net, ISO 9249, at 2,000 rpm.

What size bucket does a John Deere 60 P-Tier take?

0.19 m³ (6.8 cu ft) is the bucket the maker quotes its figures with; other sizes fit.

How far can a John Deere 60 P-Tier reach?

Its maximum reach at ground level is 6.23 m (20 ft 5 in).

How tall is a John Deere 60 P-Tier?

2.54 m (8 ft 4 in) overall.

How wide is a John Deere 60 P-Tier?

2.00 m (6 ft 7 in) overall.

How high can a John Deere 60 P-Tier dig?

Its maximum digging height is 5.96 m (19 ft 7 in).

What is the tail swing radius of a John Deere 60 P-Tier?

1.3 m (4 ft 3 in).

What is the hydraulic flow of a John Deere 60 P-Tier?

144 L/min (38.0 gpm), maximum rated flow.

What are the John Deere 60 P-Tier's main competitors?

The machines nearest it in size are the Takeuchi TB260, the Komatsu PC70-8 and the Cat 305 CR. Each has a side-by-side comparison on EquipmentsFinder.

Is the John Deere 60 P-Tier sold in the UAE?

Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.

What is a John Deere 60 P-Tier used for?

A mini excavator: a compact tracked digger, light enough to trailer and narrow enough for gardens, basements and utility work between buildings. Typical jobs: trenching for services, landscaping and garden work, footings and foundations, demolition in tight spaces.

Embed this spec card

The John Deere 60 P-Tier's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/john-deere-60g" title="John Deere 60 P-Tier specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/john-deere-60g">John Deere 60 P-Tier specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a John Deere 60 P-Tier on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.