EF Logo

mini excavatormade by John DeereUAE, USA, Global

John Deere 26 P-TierSpecs, weight and dimensions

Weight
2.62 t
2,620 kg
Dig depth
2.59 m
8 ft. 6 in.
Est. new price
~$44k

Quick answer

The John Deere 26 P-Tier is a 2.62-tonne mini excavator with a Yanmar 3TNV80F engine rated at 14.9 kW (20.0 hp). Its dig depth is 2.59 m. It suits trenching for services, landscaping and garden work and footings and foundations. Its rivals include the Bobcat E26 (2.61 t) and the Kubota U27-4 (2.57 t).

John Deere 26 P-Tier (illustration)

How much does a John Deere 26 P-Tier weigh?

The John Deere 26 P-Tier weighs 2.62 tonnes (2,620 kg, 5,780 lb.) in working order, with fuel, operator and standard attachment. That is 2% heavier than the Kubota U27-4 (2.57 t). It puts 25.0 kPa (3.6 psi) of pressure on the ground. The figures are from John Deere 26 P-Tier Compact Excavator brochure ME26PAU (23-07).

What engine is in the John Deere 26 P-Tier?

The John Deere 26 P-Tier has a Yanmar 3TNV80F engine rated at 14.9 kW (20.0 hp) net, ISO 9249, at 2,500 rpm. It displaces 1.3 L (77 cu. in.). Emissions: EPA Final Tier 4 / EU Stage IV. The fuel tank holds 34.1 L (9.0 gal.) and the engine takes 3.7 L (3.9 qt.) of oil.

How deep can a John Deere 26 P-Tier dig?

The John Deere 26 P-Tier's max digging depth is 2.59 m. In imperial units the digging depth is 8 ft. 6 in.. On the same row of their sheets, the Bobcat E26 shows 2.568 m and the Kubota U27-4 shows 2.82 m. The figures are from John Deere 26 P-Tier Compact Excavator brochure ME26PAU (23-07).

What are the John Deere 26 P-Tier dimensions?

The John Deere 26 P-Tier is 4.18 m (13 ft 9 in) long and 2.43 m (8 ft) high. The Bobcat E26 is 4.17 m long and 2.44 m high. The figures are from John Deere 26 P-Tier Compact Excavator brochure ME26PAU (23-07). These are the sheet figures for the standard build; options and attachments change them.

John Deere 26 P-Tier vs Bobcat E26: what is the difference?

The John Deere 26 P-Tier and the Bobcat E26 weigh the same on their sheets: 2.62 t. The John Deere 26 P-Tier digs deeper (2.59 m against 2.568 m), reaches further (4.63 m against 4.542 m) and dumps higher (3.19 m against 2.845 m). The Bobcat E26 has more digging or pushing force (24 kN against 22 kN) and carries more fuel (34.4 L against 34.1 L).

John Deere 26 P-Tier vs Bobcat E26, every figure

These figures are for the 26 P-Tier. The 26G is not covered here and has figures of its own, so check the serial plate before using these for one.

John Deere 26 P-Tier dimensions

John Deere 26 P-Tier, side view with dimensions (illustration)2.43 m4.18 m
Side view
John Deere 26 P-Tier, front view (illustration)
Front view
Overall height
2.43 m
Overall length
4.18 m

Illustration; figures from the maker's sheet.

How big is the John Deere 26 P-Tier?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

John Deere 26 P-Tier drawn to scale beside a person and a pickup truck. The John Deere 26 P-Tier is 4.18 m long - 79% of a pickup truck's length - and 2.43 m tall, 1.4 times a person's height.John Deere 26 P-Tier4.18 × 2.43 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The John Deere 26 P-Tier is 4.18 m long - 79% of a pickup truck's length - and 2.43 m tall, 1.4 times a person's height.

John Deere 26 P-Tier specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

51 figures in 8 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length4.18 mblade in front; 4.48 m with the blade at the rear[1] p.6
Overall length (blade in rear)4.48 m[1] p.6
Overall height (to top of cab)2.43 mcanopy and cab; transport height E on the working-range drawing is the same 2.43 m[1] p.7
Upperstructure width1.39 mcanopy; cab 1.42 m[1] p.7
Shoe width0.3 mrubber track[1] p.7
Undercarriage width1.5 m[1] p.7
Dimensions, part 2 of 2
FigureValue (metric)Source
Ground clearance (minimum)0.3 m[1] p.7
Rear-end swing radius0.8 m[1] p.7
Counterweight height0.53 m[1] p.7
Engine cover height1.49 mcanopy; cab 1.47 m[1] p.7
Undercarriage length1.96 m[1] p.7
Sprocket center to idler center1.53 m[1] p.7

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Max digging reach4.63 m1.17 m standard arm[1] p.6
Max digging depth2.59 m[1] p.6
Max cutting height4.44 mcanopy; cab 4.28 m[1] p.6
Max dumping height3.19 mcanopy; cab 3.04 m[1] p.6
Minimum swing radius1.92 mfront swing radius; cab 2.01 m[1] p.6
Boom-swing pivot-offset distance0.09 m[1] p.6
Offset distance, left0.56 m[1] p.6
Offset distance, right0.7 m[1] p.6
Bucket digging force22 kN[1] p.6
Performance, part 2 of 2
FigureValue (metric)Source
Arm digging force15 kN[1] p.6
Swing speed9.1 rpmspring-applied, hydraulically released, automatic swing brake[1] p.6
Boom swing70 deg. left / 60 deg. right[1] p.6
Travel speed (low)2.9 km/h[1] p.6
Travel speed (high)4.5 km/h[1] p.6
Ground pressure (canopy)25.0 kPa (3.6 psi)1.17 m arm, standard counterweight, rubber track[1] p.6
Ground pressure (cab)25.9 kPa (3.8 psi)[1] p.6
Lifting capacity over front, blade down (3.0 m radius)1,200 kgat ground level, canopy, standard arm, rubber track; cab 1,201 kg; limited by hydraulics[1] p.7
Lifting capacity over side (3.0 m radius)362 kgat ground level, canopy; cab 394 kg[1] p.7

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Operating weight2,620 kgcanopy, 1.17 m arm, standard counterweight, rubber track, full fuel tank, 79 kg operator[1] p.6
Operating weight (cab)2,770 kgcab, same configuration[1] p.6
Weight, part 2 of 2
FigureValue (metric)Source
Counterweight (canopy)241 kgstandard[1] p.6
Counterweight (cab)208 kgstandard[1] p.6

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelYanmar 3TNV80F[1] p.6
EmissionsEPA Final Tier 4 / EU Stage IV[1] p.6
Engine, part 2 of 2
FigureValue (metric)Source
Displacement1.3 L[1] p.6
Net power14.9 kW (20.0 hp)ISO 9249, at 2,500 rpm[1] p.6

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Hydraulic systemOpen center, 2 variable-displacement pumps, 1 fixed-gear pump and 1 pilot pump[1] p.6
Pump flow (piston, each of 2)36 L/min[1] p.6
Hydraulics, part 2 of 2
FigureValue (metric)Source
Pump flow (gear)16 L/min[1] p.6
Auxiliary flow46 L/min[1] p.6

Undercarriage

Undercarriage
FigureValue (metric)Source
Track typeRubber, 300 mm wide[1] p.7
Final drivePlanetary final drive; 2-speed axial-piston propel motors[1] p.7

Blade

Blade, part 1 of 2
FigureValue (metric)Source
Blade width1.5 m[1] p.7
Blade height0.32 m[1] p.7
Blade, part 2 of 2
FigureValue (metric)Source
Max blade lift above ground0.32 mblade bottom at highest position[1] p.6
Max blade drop below ground0.32 mblade bottom at lowest position[1] p.6

Front attachment

Front attachment
FigureValue (metric)Source
Boom length2.1 m[1] p.7
Arm length1.17 m[1] p.7
Standard bucket width0.457 m[1] p.7

Build: John Deere 26 P-Tier reduced-tail-swing mini excavator (Yanmar 3TNV80F, Final Tier 4 / Stage IV, 300 mm rubber tracks, 1.17 m arm) per Deere spec sheet ME26PAU (23-07); canopy figures unless noted. This is the sheet issued before Deere's October 2025 redesign of the 26 P-Tier; no sheet for the redesigned machine was found. The older 26G is not covered.

  1. [1]John Deere 26 P-Tier Compact Excavator brochure ME26PAU (23-07)

John Deere 26 P-Tier service

What each system holds and when John Deere says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
34.1 L9.0 gal.
Engine oil, with filter
3.7 L3.9 qt.
Cooling system
3.1 L3.3 qt.
Hydraulic tank
23.9 L6.3 gal.

John Deere 26 P-Tier against its rivals

The mini excavators nearest in weight from other makers, figure by figure, each shown at the same scale.

John Deere 26 P-Tier, Bobcat E26, Kubota U27-4, Cat 302 CR: specifications side by side
FigureJohn Deere 26 P-Tierthis pageBobcat E26 specsKubota U27-4 specsCat 302 CR specs
Operating weight2,620 kg2,608 kg2,565 kg2,262 kg
Net power14.9 kW (20.0 hp)not on its sheet14.9 kW (20.3 hp)15.7 kW (21 hp)
Max digging depth2.59 m2.568 m2.82 m2.37 m
Max digging reach4.63 m4.542 m4.74 m4.11 m
Max dumping height3.19 m2.845 m3.1 m2.56 m
Bucket digging force22 kN24 kN21 kN20 kN
Pump flownot on its sheet94 L/minnot on its sheet66 L/min
Fuel tank34.1 L34.4 L33 L26 L
Top speed4.5 km/h4.3 km/h4.5 km/h4.4 km/h
Every figureFull sheetJohn Deere 26 P-Tier vs Bobcat E26

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the John Deere 26 P-Tier if you need a higher dump (3.19 m).
  • Pick the Bobcat E26 if you need more digging force (24 kN), more hydraulic flow (94 L/min) and a bigger fuel tank (34.4 L).
  • Pick the Kubota U27-4 if you need a deeper dig (2.82 m) and longer reach (4.74 m).
  • Pick the Cat 302 CR if you need more power (15.7 kW).

John Deere 26 P-Tier prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new John Deere 26 P-Tier costs about $40,000 to $48,000 (USD), base machine before options, freight and tax - an estimate from published estimates, checked November 2026. Sources: equipbook.ai.

No John Deere 26 P-Tier is listed in the UAE on EquipmentsFinder right now. The prices below are for all mini excavators, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 28

AED 1,225 /day

No priced John Deere 26 P-Tier for hire yet: this is all mini excavators

Low AED 800High AED 1,800

No John Deere 26 P-Tier for rent listed right now.

Request a John Deere 26 P-Tier

Who is asking for mini excavators in the UAE

Contractors posted 48 requests for mini excavators on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (28), Abu Dhabi (11) and Fujairah (3). Requests name a kind of machine, not a model, so this counts every mini excavator, the John Deere 26 P-Tier among them.

Requests, last 12 months
48
For Dubai
28
For Abu Dhabi
11
  • 20 Ton Wheel Excavator Required For Purchase19 November 2026
  • 20 ton Tracked excavator pre-fitted with hydraulic vibratory roller Required For RentAbu Dhabi / 17 November 2026
  • 85 Ton Excavator with 26m Boom Required For RentDubai / 16 November 2026

Open mini excavator requests on the Inquiry BoardPost a request for a John Deere 26 P-Tier

John Deere 26 P-Tier transport size and weight

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

Length
4.18 m
Width
not published
Height
2.43 m
Weight
2.6 t

Tools for a John Deere 26 P-Tier

For the people who run one: codes, charts and calculators that fit a mini excavator.

Same class: 2 ton mini excavators

2 ton mini excavators with an operating weight of 2 to 3 t, lightest first. The John Deere 26 P-Tier is 4 of 4; every figure is the maker's.

  1. 1Cat 302 CR2.26 t
  2. 2Kubota U27-42.57 t
  3. 3Bobcat E262.61 t
  4. 4John Deere 26 P-TierThis page2.62 t

Popular John Deere mini excavator models

John Deere 26 P-Tier fault codes and serial number

All John Deere fault codesFind the year from a John Deere serial number

More John Deere 26 P-Tier questions

How much horsepower does the John Deere 26 P-Tier have?

20 hp (14.9 kW) net, ISO 9249, at 2,500 rpm.

How far can a John Deere 26 P-Tier reach?

Its maximum reach at ground level is 4.63 m (15 ft. 2 in.), 1.17 m standard arm.

How tall is a John Deere 26 P-Tier?

2.43 m (8 ft) overall.

What is the hydraulic flow of a John Deere 26 P-Tier?

46 L/min (12.2 gpm).

What is the bucket digging force of a John Deere 26 P-Tier?

22 kN (4,994 lb.).

How wide is the blade on a John Deere 26 P-Tier?

1.5 m (4 ft. 11 in.).

How fast does a John Deere 26 P-Tier go?

Its top speed is 4.5 km/h (2.8 mph).

What is the ground pressure of a John Deere 26 P-Tier?

25.0 kPa (3.6 psi).

What are the John Deere 26 P-Tier's main competitors?

The machines nearest it in size are the Bobcat E26, the Kubota U27-4 and the Cat 302 CR. Each has a side-by-side comparison on EquipmentsFinder.

Is the John Deere 26 P-Tier sold in the UAE?

Yes. The John Deere 26 P-Tier is sold in the UAE, the USA and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a John Deere 26 P-Tier used for?

A mini excavator: a compact tracked digger, light enough to trailer and narrow enough for gardens, basements and utility work between buildings. Typical jobs: trenching for services, landscaping and garden work, footings and foundations, demolition in tight spaces.

Embed this spec card

The John Deere 26 P-Tier's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/john-deere-26g" title="John Deere 26 P-Tier specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/john-deere-26g">John Deere 26 P-Tier specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a John Deere 26 P-Tier on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.