Specification sheetIssued 20 November 2026
John Deere · mini excavator
John Deere 26 P-Tier
John Deere 26 P-Tier reduced-tail-swing mini excavator (Yanmar 3TNV80F, Final Tier 4 / Stage IV, 300 mm rubber tracks, 1.17 m arm) per Deere spec sheet ME26PAU (23-07); canopy figures unless noted. This is the sheet issued before Deere's October 2025 redesign of the 26 P-Tier; no sheet for the redesigned machine was found. The older 26G is not covered.
UAEUSAGlobal
- digging depth
- 2.59 m
- power
- 14.9 kW (20.0 hp)
- Operating weight
- 2,620 kg
2.43 m4.18 m
Dimensions
- Overall length (blade in rear)
- 4.48 m
Performance
- AMax digging reach (1.17 m standard arm)
- 4.63 m
- BMax digging depth
- 2.59 m
- CMax cutting height (canopy; cab 4.28 m)
- 4.44 m
- DMax dumping height (canopy; cab 3.04 m)
- 3.19 m
- GMinimum swing radius (front swing radius; cab 2.01 m)
- 1.92 m
- Boom-swing pivot-offset distance
- 0.09 m
- Offset distance, left
- 0.56 m
- Offset distance, right
- 0.7 m
- Bucket digging force
- 22 kN
- Arm digging force
- 15 kN
- Swing speed (spring-applied, hydraulically released, automatic swing brake)
- 9.1 rpm
- Boom swing
- 70 deg. left / 60 deg. right
- Travel speed (low)
- 2.9 km/h
- Travel speed (high)
- 4.5 km/h
- Ground pressure (canopy) (1.17 m arm, standard counterweight, rubber track)
- 25.0 kPa (3.6 psi)
- Ground pressure (cab)
- 25.9 kPa (3.8 psi)
- Lifting capacity over front, blade down (3.0 m radius) (at ground level, canopy, standard arm, rubber track; cab 1,201 kg; limited by hydraulics)
- 1,200 kg
- Lifting capacity over side (3.0 m radius) (at ground level, canopy; cab 394 kg)
- 362 kg
Weight
- Operating weight (canopy, 1.17 m arm, standard counterweight, rubber track, full fuel tank, 79 kg operator)
- 2,620 kg
- Operating weight (cab) (cab, same configuration)
- 2,770 kg
- Counterweight (canopy) (standard)
- 241 kg
- Counterweight (cab) (standard)
- 208 kg
Engine
- Engine model
- Yanmar 3TNV80F
- Emissions
- EPA Final Tier 4 / EU Stage IV
- Displacement
- 1.3 L
- Net power (ISO 9249, at 2,500 rpm)
- 14.9 kW (20.0 hp)
Hydraulics
- Hydraulic system
- Open center, 2 variable-displacement pumps, 1 fixed-gear pump and 1 pilot pump
- Pump flow (piston, each of 2)
- 36 L/min
- Pump flow (gear)
- 16 L/min
- Auxiliary flow
- 46 L/min
Undercarriage
- Track type
- Rubber, 300 mm wide
- Final drive
- Planetary final drive; 2-speed axial-piston propel motors
Blade
- Blade width
- 1.5 m
- Blade height
- 0.32 m
- HMax blade lift above ground (blade bottom at highest position)
- 0.32 m
- IMax blade drop below ground (blade bottom at lowest position)
- 0.32 m
Front attachment
- Boom length
- 2.1 m
- Arm length
- 1.17 m
- Standard bucket width
- 0.457 m
Service capacities
- Fuel tank
- 34.1 L
- Engine oil, with filter
- 3.7 L
- Cooling system
- 3.1 L
- Hydraulic tank
- 23.9 L