EF Logo

mini excavatormade by John DeereUAE, USA, Global

John Deere 17 P-TierSpecs, weight and dimensions

Weight
1.72 t
1,720 kg
Dig depth
2.19 m
7 ft. 2 in.
Est. new price
~$35k

Quick answer

The John Deere 17 P-Tier is a 1.72-tonne mini excavator with a Yanmar 3TNV74F engine rated at 10.8 kW (14.5 hp). Its dig depth is 2.19 m. It suits trenching for services, landscaping and garden work and footings and foundations. Its rivals include the Kubota U17 (1.68 t) and the Takeuchi TB216 (1.8 t).

John Deere 17 P-Tier (illustration)

How much does a John Deere 17 P-Tier weigh?

The John Deere 17 P-Tier weighs 1.72 tonnes (1,720 kg, 3,790 lb.) in working order, with fuel, operator and standard attachment. That is 3% heavier than the Kubota U17 (1.68 t) and 4% lighter than the Takeuchi TB216 (1.8 t). It puts 26.6 kPa (3.9 psi) of pressure on the ground. The figures are from John Deere 17 P-Tier Compact Excavator brochure ME17PAU (23-07).

What engine is in the John Deere 17 P-Tier?

The John Deere 17 P-Tier has a Yanmar 3TNV74F engine rated at 10.8 kW (14.5 hp) net, ISO 9249, at 2,400 rpm. It displaces 1 L (61 cu. in.). Emissions: EPA Final Tier 4 / EU Stage IV. The fuel tank holds 20.1 L (5.3 gal.) and the engine takes 3.1 L (3.3 qt.) of oil.

How deep can a John Deere 17 P-Tier dig?

The John Deere 17 P-Tier's max digging depth is 2.19 m. In imperial units the digging depth is 7 ft. 2 in.. On the same row of their sheets, the Kubota U17 shows 2.31 m and the Takeuchi TB216 shows 2.39 m. The figures are from John Deere 17 P-Tier Compact Excavator brochure ME17PAU (23-07).

What are the John Deere 17 P-Tier dimensions?

The John Deere 17 P-Tier is 3.50 m (11 ft 6 in) long and 2.38 m (7 ft 10 in) high. The Kubota U17 is 3.54 m long, 0.99 m wide and 2.34 m high. The figures are from John Deere 17 P-Tier Compact Excavator brochure ME17PAU (23-07). These are the sheet figures for the standard build; options and attachments change them.

John Deere 17 P-Tier vs Kubota U17: what is the difference?

The John Deere 17 P-Tier is 3% heavier than the Kubota U17: 1.72 t against 1.68 t. The John Deere 17 P-Tier dumps higher (2.51 m against 2.44 m), carries more fuel (20.1 L against 19 L) and is faster (4.2 km/h against 4.1 km/h). Both sets of figures are the makers’ own, for the builds on our sheets.

These figures are for the 17 P-Tier. The 17G is not covered here and has figures of its own, so check the serial plate before using these for one.

John Deere 17 P-Tier dimensions

John Deere 17 P-Tier, side view with dimensions (illustration)2.38 m3.5 m
Side view
John Deere 17 P-Tier, front view (illustration)
Front view
Overall height
2.38 m
Overall length
3.5 m

Illustration; figures from the maker's sheet.

How big is the John Deere 17 P-Tier?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

John Deere 17 P-Tier drawn to scale beside a person and a pickup truck. The John Deere 17 P-Tier is 3.5 m long - 66% of a pickup truck's length - and 2.38 m tall, 1.4 times a person's height.John Deere 17 P-Tier3.5 × 2.38 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The John Deere 17 P-Tier is 3.5 m long - 66% of a pickup truck's length - and 2.38 m tall, 1.4 times a person's height.

John Deere 17 P-Tier specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

49 figures in 8 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length3.5 mblade in front[1] p.6
Overall height (to top of canopy)2.38 mcanopy (ROPS); transport height E on the working-range drawing is the same 2.38 m[1] p.7
Upperstructure width0.99 m[1] p.7
Shoe width0.23 mrubber track[1] p.7
Undercarriage width, minimum0.98 mhydraulic-adjustable variable width, tracks retracted[1] p.7
Undercarriage width, maximum1.28 mtracks extended[1] p.7
Dimensions, part 2 of 2
FigureValue (metric)Source
Ground clearance (minimum)0.165 m[1] p.7
Rear-end swing radius0.68 m[1] p.7
Counterweight height0.45 m[1] p.7
Engine cover height1.15 m[1] p.7
Undercarriage length1.57 m[1] p.7
Sprocket center to idler center1.21 m[1] p.7

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Max digging reach3.81 m0.93 m standard arm[1] p.6
Max digging depth2.19 m[1] p.6
Max cutting height3.54 m[1] p.6
Max dumping height2.51 m[1] p.6
Minimum swing radius1.53 mfront swing radius[1] p.6
Boom-swing pivot-offset distance0.11 m[1] p.6
Offset distance, left0.36 m[1] p.6
Offset distance, right0.56 m[1] p.6
Bucket digging force16 kN[1] p.6
Performance, part 2 of 2
FigureValue (metric)Source
Arm digging force9 kN[1] p.6
Swing speed9.4 rpmspring-applied, hydraulically released, automatic swing brake[1] p.6
Boom swing70 deg. left / 50 deg. right[1] p.6
Travel speed (low)2.4 km/h[1] p.6
Travel speed (high)4.2 km/h[1] p.6
Ground pressure26.6 kPa (3.9 psi)with rubber track[1] p.6
Lifting capacity over front, blade down (3.0 m radius)471 kgat ground level, standard arm, rubber track, standard counterweight; limited by hydraulics[1] p.7
Lifting capacity over side (3.0 m radius)217 kgat ground level, standard arm, rubber track, standard counterweight[1] p.7

Weight

Weight
FigureValue (metric)Source
Operating weight1,720 kgcanopy, 0.93 m arm, standard counterweight, rubber track, full fuel tank, 79 kg operator[1] p.6
Counterweight120 kgstandard[1] p.7

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelYanmar 3TNV74F[1] p.6
EmissionsEPA Final Tier 4 / EU Stage IV[1] p.6
Engine, part 2 of 2
FigureValue (metric)Source
Displacement1 L[1] p.6
Net power10.8 kW (14.5 hp)ISO 9249, at 2,400 rpm[1] p.6

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Hydraulic systemOpen center, 2 variable-displacement pumps, 1 fixed-gear pump and 1 pilot pump[1] p.6
Pump flow (piston, each of 2)19 L/min[1] p.6
Hydraulics, part 2 of 2
FigureValue (metric)Source
Pump flow (gear)11 L/min[1] p.6
Auxiliary flow30 L/min[1] p.6

Undercarriage

Undercarriage
FigureValue (metric)Source
Track typeRubber, 230 mm wide; hydraulic-adjustable variable width[1] p.7
Final drivePlanetary final drive; 2-speed axial-piston propel motors[1] p.7

Blade

Blade, part 1 of 2
FigureValue (metric)Source
Blade width, minimum0.98 m[1] p.7
Blade width, maximum1.28 m[1] p.7
Blade height0.26 m[1] p.7
Blade, part 2 of 2
FigureValue (metric)Source
Max blade lift above ground0.29 mblade bottom at highest position[1] p.6
Max blade drop below ground0.23 mblade bottom at lowest position[1] p.6

Front attachment

Front attachment
FigureValue (metric)Source
Boom length1.82 m[1] p.7
Arm length0.93 m[1] p.7
Standard bucket width0.406 m[1] p.7

Build: John Deere 17 P-Tier reduced-tail-swing mini excavator (Yanmar 3TNV74F, Final Tier 4 / Stage IV, variable-width rubber tracks, 0.93 m arm) per Deere spec sheet ME17PAU (23-07), canopy machine. This is the sheet issued before Deere's October 2025 redesign of the 17 P-Tier; no sheet for the redesigned machine was found. The older 17G is not covered.

  1. [1]John Deere 17 P-Tier Compact Excavator brochure ME17PAU (23-07)

John Deere 17 P-Tier service

What each system holds and when John Deere says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
20.1 L5.3 gal.
Engine oil, with filter
3.1 L3.3 qt.
Cooling system
2.7 L2.9 qt.
Hydraulic tank
14 L3.7 gal.

John Deere 17 P-Tier against its rivals

The mini excavators nearest in weight from other makers, figure by figure, each shown at the same scale.

John Deere 17 P-Tier, Kubota U17, Takeuchi TB216, JCB 8018: specifications side by side
FigureJohn Deere 17 P-Tierthis pageKubota U17 specsTakeuchi TB216 specsJCB 8018 specs
Operating weight1,720 kg1,675 kg1,800 kg1,822 kg
Net power10.8 kW (14.5 hp)11.6 kW (15.1 HP)not on its sheet14.2 kW (19 hp)
Max torquenot on its sheetnot on its sheet52 Nm67 Nm
Max digging depth2.19 m2.31 m2.39 m2.142 m
Max digging reach3.81 m3.9 m4.09 m3.933 m
Max dumping height2.51 m2.44 m2.705 m2.568 m
Fuel tank20.1 L19 L22 L23.5 L
Top speed4.2 km/h4.1 km/h4.2 km/h3.8 km/h
Tail swing radiusnot on its sheet0.62 m1.075 m1.059 m
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • The John Deere 17 P-Tier leads none of these figures, so the choice comes down to price, hours and dealer support.
  • Pick the Kubota U17 if you need a tighter turn (0.62 m).
  • Pick the Takeuchi TB216 if you need a deeper dig (2.39 m), longer reach (4.09 m) and a higher dump (2.705 m).
  • Pick the JCB 8018 if you need more power (14.2 kW), more torque (67 Nm) and a bigger fuel tank (23.5 L).

John Deere 17 P-Tier prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new John Deere 17 P-Tier costs about $34,000 to $35,000 (USD), base machine before options, freight and tax - an estimate from dealer list prices, checked November 2026. Sources: trigreenequipment.com, equipbook.ai.

No John Deere 17 P-Tier is listed in the UAE on EquipmentsFinder right now. The prices below are for all mini excavators, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 28

AED 1,225 /day

No priced John Deere 17 P-Tier for hire yet: this is all mini excavators

Low AED 800High AED 1,800

No John Deere 17 P-Tier for rent listed right now.

Request a John Deere 17 P-Tier

Who is asking for mini excavators in the UAE

Contractors posted 48 requests for mini excavators on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (28), Abu Dhabi (11) and Fujairah (3). Requests name a kind of machine, not a model, so this counts every mini excavator, the John Deere 17 P-Tier among them.

Requests, last 12 months
48
For Dubai
28
For Abu Dhabi
11
  • 20 Ton Wheel Excavator Required For Purchase19 November 2026
  • 20 ton Tracked excavator pre-fitted with hydraulic vibratory roller Required For RentAbu Dhabi / 17 November 2026
  • 85 Ton Excavator with 26m Boom Required For RentDubai / 16 November 2026

Open mini excavator requests on the Inquiry BoardPost a request for a John Deere 17 P-Tier

John Deere 17 P-Tier transport size and weight

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

Length
3.5 m
Width
not published
Height
2.38 m
Weight
1.7 t

Tools for a John Deere 17 P-Tier

For the people who run one: codes, charts and calculators that fit a mini excavator.

Same class: 1 ton mini excavators

1 ton mini excavators with an operating weight of 1 to 2 t, lightest first. The John Deere 17 P-Tier is 4 of 9; every figure is the maker's.

  1. 1Kubota U10-51.2 t
  2. 2Bobcat E10e1.2 t
  3. 3Kubota U171.68 t
  4. 4John Deere 17 P-TierThis page1.72 t
  5. 5Takeuchi TB2161.8 t
  6. 6JCB 80181.82 t
  7. 7Yanmar ViO17-1E1.83 t
  8. 8Bobcat E191.89 t
  9. 9Bobcat E201.93 t

Popular John Deere mini excavator models

John Deere 17 P-Tier fault codes and serial number

All John Deere fault codesFind the year from a John Deere serial number

More John Deere 17 P-Tier questions

How much horsepower does the John Deere 17 P-Tier have?

14.5 hp (10.8 kW) net, ISO 9249, at 2,400 rpm.

How far can a John Deere 17 P-Tier reach?

Its maximum reach at ground level is 3.81 m (12 ft. 6 in.), 0.93 m standard arm.

How tall is a John Deere 17 P-Tier?

2.38 m (7 ft 10 in) overall.

What is the hydraulic flow of a John Deere 17 P-Tier?

30 L/min (7.9 gpm).

What is the bucket digging force of a John Deere 17 P-Tier?

16 kN (3,597 lb.).

How fast does a John Deere 17 P-Tier go?

Its top speed is 4.2 km/h (2.6 mph).

What is the ground pressure of a John Deere 17 P-Tier?

26.6 kPa (3.9 psi), with rubber track.

What size tracks does a John Deere 17 P-Tier have?

The track shoes are 0.23 m (9 in.) wide, rubber track.

What are the John Deere 17 P-Tier's main competitors?

The machines nearest it in size are the Kubota U17, the Takeuchi TB216 and the JCB 8018. Each has a side-by-side comparison on EquipmentsFinder.

Is the John Deere 17 P-Tier sold in the UAE?

Yes. The John Deere 17 P-Tier is sold in the UAE, the USA and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a John Deere 17 P-Tier used for?

A mini excavator: a compact tracked digger, light enough to trailer and narrow enough for gardens, basements and utility work between buildings. Typical jobs: trenching for services, landscaping and garden work, footings and foundations, demolition in tight spaces.

Embed this spec card

The John Deere 17 P-Tier's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/john-deere-17g" title="John Deere 17 P-Tier specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/john-deere-17g">John Deere 17 P-Tier specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a John Deere 17 P-Tier on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.