Specification sheetIssued 20 November 2026
John Deere · mini excavator
John Deere 17 P-Tier
John Deere 17 P-Tier reduced-tail-swing mini excavator (Yanmar 3TNV74F, Final Tier 4 / Stage IV, variable-width rubber tracks, 0.93 m arm) per Deere spec sheet ME17PAU (23-07), canopy machine. This is the sheet issued before Deere's October 2025 redesign of the 17 P-Tier; no sheet for the redesigned machine was found. The older 17G is not covered.
UAEUSAGlobal
- digging depth
- 2.19 m
- power
- 10.8 kW (14.5 hp)
- Operating weight
- 1,720 kg
2.38 m3.5 m
Dimensions
- Undercarriage width, maximum (tracks extended)
- 1.28 m
Performance
- AMax digging reach (0.93 m standard arm)
- 3.81 m
- BMax digging depth
- 2.19 m
- CMax cutting height
- 3.54 m
- DMax dumping height
- 2.51 m
- GMinimum swing radius (front swing radius)
- 1.53 m
- Boom-swing pivot-offset distance
- 0.11 m
- Offset distance, left
- 0.36 m
- Offset distance, right
- 0.56 m
- Bucket digging force
- 16 kN
- Arm digging force
- 9 kN
- Swing speed (spring-applied, hydraulically released, automatic swing brake)
- 9.4 rpm
- Boom swing
- 70 deg. left / 50 deg. right
- Travel speed (low)
- 2.4 km/h
- Travel speed (high)
- 4.2 km/h
- Ground pressure (with rubber track)
- 26.6 kPa (3.9 psi)
- Lifting capacity over front, blade down (3.0 m radius) (at ground level, standard arm, rubber track, standard counterweight; limited by hydraulics)
- 471 kg
- Lifting capacity over side (3.0 m radius) (at ground level, standard arm, rubber track, standard counterweight)
- 217 kg
Weight
- Operating weight (canopy, 0.93 m arm, standard counterweight, rubber track, full fuel tank, 79 kg operator)
- 1,720 kg
- Counterweight (standard)
- 120 kg
Engine
- Engine model
- Yanmar 3TNV74F
- Emissions
- EPA Final Tier 4 / EU Stage IV
- Displacement
- 1 L
- Net power (ISO 9249, at 2,400 rpm)
- 10.8 kW (14.5 hp)
Hydraulics
- Hydraulic system
- Open center, 2 variable-displacement pumps, 1 fixed-gear pump and 1 pilot pump
- Pump flow (piston, each of 2)
- 19 L/min
- Pump flow (gear)
- 11 L/min
- Auxiliary flow
- 30 L/min
Undercarriage
- Track type
- Rubber, 230 mm wide; hydraulic-adjustable variable width
- Final drive
- Planetary final drive; 2-speed axial-piston propel motors
Blade
- Blade width, minimum
- 0.98 m
- Blade width, maximum
- 1.28 m
- Blade height
- 0.26 m
- HMax blade lift above ground (blade bottom at highest position)
- 0.29 m
- IMax blade drop below ground (blade bottom at lowest position)
- 0.23 m
Front attachment
- Boom length
- 1.82 m
- Arm length
- 0.93 m
- Standard bucket width
- 0.406 m
Service capacities
- Fuel tank
- 20.1 L
- Engine oil, with filter
- 3.1 L
- Cooling system
- 2.7 L
- Hydraulic tank
- 14 L