Specification sheetIssued 20 November 2026
John Deere · mini excavator
John Deere 17 P-Tier
John Deere 17 P-Tier reduced-tail-swing mini excavator (Yanmar 3TNV74F, Final Tier 4 / Stage IV, variable-width rubber tracks, 0.93 m arm) per Deere spec sheet ME17PAU (23-07), canopy machine. This is the sheet issued before Deere's October 2025 redesign of the 17 P-Tier; no sheet for the redesigned machine was found. The older 17G is not covered.
UAEUSAGlobal
- digging depth
- 7 ft. 2 in.
- power
- 14.5 hp
- Operating weight
- 3,790 lb.
7.8 ft11.5 ft
Dimensions
- Undercarriage width, maximum (tracks extended)
- 4 ft. 2 in.
Performance
- AMax digging reach (0.93 m standard arm)
- 12 ft. 6 in.
- BMax digging depth
- 7 ft. 2 in.
- CMax cutting height
- 11 ft. 7 in.
- DMax dumping height
- 8 ft. 3 in.
- GMinimum swing radius (front swing radius)
- 5 ft. 0 in.
- Boom-swing pivot-offset distance
- 4 in.
- Offset distance, left
- 14 in.
- Offset distance, right
- 22 in.
- Bucket digging force
- 3,597 lb.
- Arm digging force
- 1,933 lb.
- Swing speed (spring-applied, hydraulically released, automatic swing brake)
- 9.4 rpm
- Boom swing
- 70 deg. left / 50 deg. right
- Travel speed (low)
- 1.5 mph
- Travel speed (high)
- 2.6 mph
- Ground pressure (with rubber track)
- 26.6 kPa (3.9 psi)
- Lifting capacity over front, blade down (3.0 m radius) (at ground level, standard arm, rubber track, standard counterweight; limited by hydraulics)
- 1,015 lb.
- Lifting capacity over side (3.0 m radius) (at ground level, standard arm, rubber track, standard counterweight)
- 470 lb.
Weight
- Operating weight (canopy, 0.93 m arm, standard counterweight, rubber track, full fuel tank, 79 kg operator)
- 3,790 lb.
- Counterweight (standard)
- 265 lb.
Engine
- Engine model
- Yanmar 3TNV74F
- Emissions
- EPA Final Tier 4 / EU Stage IV
- Displacement
- 61 cu. in.
- Net power (ISO 9249, at 2,400 rpm)
- 14.5 hp
Hydraulics
- Hydraulic system
- Open center, 2 variable-displacement pumps, 1 fixed-gear pump and 1 pilot pump
- Pump flow (piston, each of 2)
- 5.1 gpm
- Pump flow (gear)
- 2.9 gpm
- Auxiliary flow
- 7.9 gpm
Undercarriage
- Track type
- Rubber, 230 mm wide; hydraulic-adjustable variable width
- Final drive
- Planetary final drive; 2-speed axial-piston propel motors
Blade
- Blade width, minimum
- 3 ft. 3 in.
- Blade width, maximum
- 4 ft. 2 in.
- Blade height
- 10.2 in.
- HMax blade lift above ground (blade bottom at highest position)
- 11 in.
- IMax blade drop below ground (blade bottom at lowest position)
- 9 in.
Front attachment
- Boom length
- 6 ft. 0 in.
- Arm length
- 3 ft. 1 in.
- Standard bucket width
- 16 in.
Service capacities
- Fuel tank
- 5.3 gal.
- Engine oil, with filter
- 3.3 qt.
- Cooling system
- 2.9 qt.
- Hydraulic tank
- 3.7 gal.