Specification sheetIssued 20 November 2026
John Deere · mini excavator
John Deere 60 P-Tier
John Deere 60 P-Tier compact excavator (the current model; it replaced the 60G; reduced tail swing, Yanmar 4TNV98C-WHB Final Tier 4 / Stage IV) from the North American spec sheet ME60PAU (23-07). Dimensions and ranges are for the cab machine with the standard 1,500 mm arm, 400 mm rubber track and standard counterweight unless noted.
USAGlobal
- digging depth
- 3.77 m
- power
- 39.6 kW (53 hp)
- Operating weight
- 6,180 kg
- Bucket capacity
- 0.19 m³
2.54 m1.99 m5.76 m
2 mPerformance
- AMax digging height (Standard arm; 6.19 m (20 ft 4 in) with long arm)
- 5.96 m
- BMax dumping height (Standard arm; 4.41 m (14 ft 6 in) with long arm)
- 4.17 m
- CMax digging depth (Standard arm; 4.12 m (13 ft 6 in) with long arm)
- 3.77 m
- DMax digging reach (Standard arm; 6.56 m (21 ft 6 in) with long arm)
- 6.23 m
- EMinimum front swing radius (Standard arm; 2.54 m (8 ft 4 in) with long arm and additional counterweight)
- 2.45 m
- Bucket capacity (Standard bucket, 762 mm (30 in) wide, 204 kg)
- 0.19 m³
- Bucket digging force (ISO, HCM bucket with 788.1 mm tip radius)
- 41 kN
- Arm digging force (ISO; 27.0 kN (6,060 lbf) with long arm)
- 31 kN
- Travel speed (high)
- 4.8 km/h
- Travel speed (low)
- 2.9 km/h
- Swing speed (Right and left)
- 9.5 rpm
- Boom swing, left
- 80°
- Boom swing, right
- 60°
- Ground pressure (Standard arm, 400 mm rubber track; 36 kPa (5.2 psi) with long arm and additional counterweight)
- 34 kPa (4.9 psi) canopy / 35 kPa (5.1 psi) cab
- Lift capacity over front, ground level at 3.0 m radius (Cab, standard arm, standard counterweight, blade down, ISO 10567; long arm 3,810 kg)
- 3,880 kg
- Lift capacity over side, ground level at 3.0 m radius (Cab, standard arm, rubber track, standard counterweight; 1,690 kg with additional counterweight)
- 1,500 kg
Weight
- Operating weight (Cab, rubber track, standard arm; 6,010 kg (13,250 lb) with canopy. Includes 745 kg counterweight, 762 mm 204 kg bucket, full fuel tank and 75 kg operator)
- 6,180 kg
- Operating weight (canopy) (Rubber track)
- 6,010 kg
- Operating weight (steel track, cab) (Steel track; canopy 6,110 kg (13,470 lb))
- 6,280 kg
- Operating weight (long arm, cab) (Rubber track, with additional counterweight; canopy 6,040 kg (13,320 lb); steel track cab 6,310 kg (13,910 lb))
- 6,210 kg
- Counterweight (Standard, including hardware)
- 745 kg
- Additional counterweight (Fitted with the long arm)
- 270 kg
- Optional angle blade (Added weight)
- 458 kg
Engine
- Engine model
- Yanmar 4TNV98C-WHB
- Emissions
- EPA Final Tier 4 / EU Stage IV
- Displacement
- 3.3 L
- Net power (ISO 9249, at 2,000 rpm)
- 39.6 kW (53 hp)
- Alternator
- 55 amp
Hydraulics
- Hydraulic system
- Closed-centre load sensing, 1 variable-displacement pump; hydraulic pilot-operated controls
- Pump flow (Maximum rated flow)
- 144 L/min
- Auxiliary flow (Maximum rated flow)
- 92 L/min
Undercarriage
- Track type
- Rubber track, 400 mm (16 in); steel track with triple semi-grousers or rubber crawler pad optional
- Powertrain
- 2-speed propel with automatic shift; each track driven by a hydrostatic axial-piston motor through a 2-stage planetary reduction
Blade
- Blade width (Backfill blade; hydraulic angle blade optional)
- 2 m
- Blade height
- 0.42 m
- NMax blade lift above ground
- 0.45 m
- OMax blade drop below ground
- 0.39 m
Front attachment
- Boom length
- 2.965 m
- Arm length (Standard arm)
- 1.5 m
- Arm length (long arm) (Includes additional 270 kg counterweight)
- 1.85 m
Service capacities
- Fuel tank
- 120 L
- Engine oil, with filter
- 11.2 L
- Cooling system (Engine coolant)
- 7.7 L
- Hydraulic tank
- 80 L