Specification sheetIssued 20 November 2026
John Deere · mini excavator
John Deere 60 P-Tier
John Deere 60 P-Tier compact excavator (the current model; it replaced the 60G; reduced tail swing, Yanmar 4TNV98C-WHB Final Tier 4 / Stage IV) from the North American spec sheet ME60PAU (23-07). Dimensions and ranges are for the cab machine with the standard 1,500 mm arm, 400 mm rubber track and standard counterweight unless noted.
USAGlobal
- digging depth
- 12 ft 4 in
- power
- 53 hp
- Operating weight
- 13,620 lb
- Bucket capacity
- 6.8 cu ft
8.3 ft6.5 ft18.9 ft
6.6 ftPerformance
- AMax digging height (Standard arm; 6.19 m (20 ft 4 in) with long arm)
- 19 ft 7 in
- BMax dumping height (Standard arm; 4.41 m (14 ft 6 in) with long arm)
- 13 ft 8 in
- CMax digging depth (Standard arm; 4.12 m (13 ft 6 in) with long arm)
- 12 ft 4 in
- DMax digging reach (Standard arm; 6.56 m (21 ft 6 in) with long arm)
- 20 ft 5 in
- EMinimum front swing radius (Standard arm; 2.54 m (8 ft 4 in) with long arm and additional counterweight)
- 8 ft 0 in
- Bucket capacity (Standard bucket, 762 mm (30 in) wide, 204 kg)
- 6.8 cu ft
- Bucket digging force (ISO, HCM bucket with 788.1 mm tip radius)
- 9,240 lbf
- Arm digging force (ISO; 27.0 kN (6,060 lbf) with long arm)
- 6,990 lbf
- Travel speed (high)
- 3.0 mph
- Travel speed (low)
- 1.8 mph
- Swing speed (Right and left)
- 9.5 rpm
- Boom swing, left
- 80°
- Boom swing, right
- 60°
- Ground pressure (Standard arm, 400 mm rubber track; 36 kPa (5.2 psi) with long arm and additional counterweight)
- 34 kPa (4.9 psi) canopy / 35 kPa (5.1 psi) cab
- Lift capacity over front, ground level at 3.0 m radius (Cab, standard arm, standard counterweight, blade down, ISO 10567; long arm 3,810 kg)
- 8,550 lb
- Lift capacity over side, ground level at 3.0 m radius (Cab, standard arm, rubber track, standard counterweight; 1,690 kg with additional counterweight)
- 3,310 lb
Weight
- Operating weight (Cab, rubber track, standard arm; 6,010 kg (13,250 lb) with canopy. Includes 745 kg counterweight, 762 mm 204 kg bucket, full fuel tank and 75 kg operator)
- 13,620 lb
- Operating weight (canopy) (Rubber track)
- 13,250 lb
- Operating weight (steel track, cab) (Steel track; canopy 6,110 kg (13,470 lb))
- 13,850 lb
- Operating weight (long arm, cab) (Rubber track, with additional counterweight; canopy 6,040 kg (13,320 lb); steel track cab 6,310 kg (13,910 lb))
- 13,690 lb
- Counterweight (Standard, including hardware)
- 1,642 lb
- Additional counterweight (Fitted with the long arm)
- 595 lb
- Optional angle blade (Added weight)
- 1,010 lb
Engine
- Engine model
- Yanmar 4TNV98C-WHB
- Emissions
- EPA Final Tier 4 / EU Stage IV
- Displacement
- 203 cu in
- Net power (ISO 9249, at 2,000 rpm)
- 53 hp
- Alternator
- 55 amp
Hydraulics
- Hydraulic system
- Closed-centre load sensing, 1 variable-displacement pump; hydraulic pilot-operated controls
- Pump flow (Maximum rated flow)
- 38.0 gpm
- Auxiliary flow (Maximum rated flow)
- 24.2 gpm
Undercarriage
- Track type
- Rubber track, 400 mm (16 in); steel track with triple semi-grousers or rubber crawler pad optional
- Powertrain
- 2-speed propel with automatic shift; each track driven by a hydrostatic axial-piston motor through a 2-stage planetary reduction
Blade
- Blade width (Backfill blade; hydraulic angle blade optional)
- 6 ft 7 in
- Blade height
- 17 in
- NMax blade lift above ground
- 18 in
- OMax blade drop below ground
- 15 in
Front attachment
- Boom length
- 9 ft 9 in
- Arm length (Standard arm)
- 4 ft 11 in
- Arm length (long arm) (Includes additional 270 kg counterweight)
- 6 ft 1 in
Service capacities
- Fuel tank
- 31.7 gal
- Engine oil, with filter
- 3 gal
- Cooling system (Engine coolant)
- 2 gal
- Hydraulic tank
- 21.1 gal