EF Logo

mini excavatormade by KomatsuUAE, Global

Komatsu PC56-7Specs, weight and dimensions

Weight
5.3 t
5,300 kg
Dig depth
3.8 m
12 ft 6 in
Bucket
0.2 m³
0.26 yd³

Quick answer

The Komatsu PC56-7 is a 5.3-tonne mini excavator with a Komatsu S4D87E-1 engine. Its dig depth is 3.8 m and its bucket is 0.2 m³. It suits trenching for services, landscaping and garden work and footings and foundations. Its rivals include the Kubota KX057-4 (5.6 t) and the Bobcat E50 (5.15 t).

Komatsu PC56-7 (illustration)

How much does a Komatsu PC56-7 weigh?

The Komatsu PC56-7 weighs 5.3 tonnes (5,300 kg, 11,684 lb) in working order, with fuel, operator and standard attachment. That is 5% lighter than the Kubota KX057-4 (5.6 t) and 3% heavier than the Bobcat E50 (5.15 t). It puts 30.7 kPa of pressure on the ground. The figures are from Komatsu Technical Report Vol. 54 No. 161, Introduction of Compact Excavator PC56-7 (Komatsu Ltd., 2008).

What engine is in the Komatsu PC56-7?

The Komatsu PC56-7 has a Komatsu S4D87E-1 engine. It displaces 2.4 L (148.5 cu in). Emissions: Meets the Chinese national off-road emission regulation in force from October 2010. The fuel tank holds 120 L (31.7 US gal). The figures are from Komatsu Technical Report Vol. 54 No. 161, Introduction of Compact Excavator PC56-7 (Komatsu Ltd., 2008).

How deep can a Komatsu PC56-7 dig?

The Komatsu PC56-7's max digging depth is 3.8 m. In imperial units the digging depth is 12 ft 6 in. The sheet notes: 3.81 m on https://www.tiebaobei.com/canshu/1602304-55.html. On the same row of their sheets, the Kubota KX057-4 shows 3.865 m and the Bobcat E50 shows 3.478 m. The figures are from Komatsu Technical Report Vol. 54 No. 161, Introduction of Compact Excavator PC56-7 (Komatsu Ltd., 2008).

What are the Komatsu PC56-7 dimensions?

The Komatsu PC56-7 is 5.93 m (19 ft 6 in) long, 1.96 m (6 ft 5 in) wide and 2.55 m (8 ft 4 in) high. As it stands it is too big for the door of a standard shipping container. The Kubota KX057-4 is 5.52 m long, 1.96 m wide and 2.55 m high.

Komatsu PC56-7 vs Kubota KX057-4: what is the difference?

The Komatsu PC56-7 is 5% lighter than the Kubota KX057-4: 5.3 t against 5.6 t. The Komatsu PC56-7 carries more fuel (120 L against 75 L). The Kubota KX057-4 digs deeper (3.865 m against 3.8 m), reaches further (6.11 m against 5.98 m) and dumps higher (4.18 m against 4.13 m). Both sets of figures are the makers’ own, for the builds on our sheets.

Komatsu PC56-7 vs Kubota KX057-4, every figure

Komatsu PC56-7 dimensions

Komatsu PC56-7, side view with dimensions (illustration)2.55 m1.98 m5.94 m
Side view
Komatsu PC56-7, front view (illustration)1.96 m
Front view
Overall height
2.55 m
Track on ground
1.98 m
Overall length
5.94 m
Overall width
1.96 m

Illustration; figures from the maker's sheet.

How big is the Komatsu PC56-7?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Komatsu PC56-7 drawn to scale beside a person and a pickup truck. The Komatsu PC56-7 is 5.94 m long - about 1.1 pickup trucks - and 2.55 m tall, 1.5 times a person's height.Komatsu PC56-75.94 × 2.55 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Komatsu PC56-7 is 5.94 m long - about 1.1 pickup trucks - and 2.55 m tall, 1.5 times a person's height.

Komatsu PC56-7 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

45 figures in 7 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length5.935 mTransport length; also printed by https://www.tiebaobei.com/canshu/1602304-55.html[4]
Overall width1.96 mEquals the track overall width (gauge plus shoe width)[2]
Overall height (to top of cab)2.55 m[2]
Track length2.5 m[2]
Track length on ground1.98 m[2]
Dimensions, part 2 of 2
FigureValue (metric)Source
Track gauge1.56 m[2]
Shoe width0.4 mRubber or steel shoe width as printed (400 mm)[2]
Tail swing radius1.65 mConventional (not reduced) tail swing; PC55MR-2 predecessor was 1.06 m[1] p.1
Ground clearance (minimum)0.32 m[2]

Weight

Weight
FigureValue (metric)Source
Operating weight5,300 kgMaker's machine mass, Table 1; one dealer lists 5,690 kg for later Tier 4 builds[1] p.1
Ground pressure30.7 kPaAlso printed by https://product.d1cm.com/komatsu001/106441/[2]

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Bucket capacity0.2 m³Standard bucket; bucket range 0.055-0.22 m3 on https://product.d1cm.com/komatsu001/106441/[1] p.1
Max digging depth3.8 m3.81 m on https://www.tiebaobei.com/canshu/1602304-55.html[1] p.1
Max reach at ground level5.98 m[2]
Max digging reach6.12 m6.13 m on https://www.tiebaobei.com/canshu/1602304-55.html[1] p.1
Max digging height5.86 m5.85 m on https://www.cehome.com/news/20091124/1835.shtml[2]
Max dumping height4.13 m4.16 m on https://www.cehome.com/news/20091124/1835.shtml[2]
Max vertical wall digging depth3.06 m[2]
Performance, part 2 of 2
FigureValue (metric)Source
Bucket digging force39 kNAlso 39 kN on https://www.cehome.com/news/20091124/1835.shtml[3]
Arm digging force24 kN[3]
Swing speed9.0 min-1[2]
Travel speed (high)4.1 km/hLow 2.6 km/h; automatic two-speed shift[2]
Travel speed (low)2.6 km/h[2]
Gradeability30°[4]

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelKomatsu S4D87E-1[1] p.3
Type4-stroke, water-cooled, in-line, direct injection[2]
AspirationTurbocharged[1] p.3
EmissionsMeets the Chinese national off-road emission regulation in force from October 2010[1] p.3
Engine, part 2 of 2
FigureValue (metric)Source
Cylinders4[4]
Bore x stroke87 x 102.4 mm[2]
Displacement2.4 L[1] p.3
Rated power34.6 kW (46 HP)At 2300 min-1; the report prints 'rated output' without naming a test standard. Komatsu Chinese page lists 47 PS (https://www.cehome.com/news/20091124/1835.shtml)[1] p.3

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Main pumps2 variable-displacement piston pumps, 2 gear pumps[3]
Pump flow51 x 2 + 32 + 12 lpmPiston pumps 2 x 51 L/min, gear pumps 32 and 12 L/min[3]
Max pressure265 bar26.5 MPa, work equipment and travel circuits[2]
Swing circuit pressure196 bar19.6 MPa[2]
Pilot circuit pressure37 bar3.7 MPa[3]
Hydraulics, part 2 of 2
FigureValue (metric)Source
Travel motors2 variable-displacement piston motors[2]
Swing motor1 fixed-displacement piston motor[2]
Boom cylinder bore90 mm1 cylinder; stroke 686 mm (https://product.d1cm.com/komatsu001/106441/) or 689.5 mm (https://www.tiebaobei.com/canshu/1602304-55.html)[2]
Arm cylinder bore85 mm1 cylinder; stroke 709 mm (https://product.d1cm.com/komatsu001/106441/) or 709.5 mm (https://www.tiebaobei.com/canshu/1602304-55.html)[2]
Bucket cylinder bore75 mm1 cylinder; stroke 580 mm[2]

Undercarriage

Undercarriage
FigureValue (metric)Source
Track shoesSteel shoes, 400 mm wide[4]
Track rollers (each side)5Increased from 4 on the PC55MR-2; inboard-type carrier roller and enlarged shoe guard[1] p.2

Blade

Blade
FigureValue (metric)Source
Blade height0.355 mD1CM labels 355 mm as blade height (beside an implausible 700 mm width); Tiebaobei labels 355 mm as blade lift/drop, and D1CM gives lift/drop as 430 / 330 mm, so the figure is uncertain[3]

Build: Komatsu PC56-7 (5.3 t conventional-tail-swing mini excavator, Komatsu S4D87E-1 engine, 400 mm shoes, 0.20 m3 standard bucket) as introduced in Komatsu's 2008 Technical Report No. 161. The maker publishes no downloadable PC56-7 brochure or dimension drawing, so the dimension rows are numbered 1-9 here rather than lettered, and most figures beyond the maker's report come from Chinese spec portals that print the Komatsu spec table.

  1. [1]Komatsu Technical Report Vol. 54 No. 161, Introduction of Compact Excavator PC56-7 (Komatsu Ltd., 2008)
  2. [2]Tiebaobei PC56-7 factory parameter table
  3. [3]D1CM PC56-7 parameter table
  4. [4]CEHome PC56-7 specification article

Komatsu PC56-7 service

What each system holds and when Komatsu says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
120 L31.7 US gal
Cooling system
8 L2.1 US gal

Komatsu PC56-7 against its rivals

The mini excavators nearest in weight from other makers, figure by figure, each shown at the same scale.

Komatsu PC56-7, Kubota KX057-4, Bobcat E50, SANY SY50U: specifications side by side
FigureKomatsu PC56-7this pageKubota KX057-4 specsBobcat E50 specsSANY SY50U specs
Operating weight5,300 kg5,600 kg5,151 kg5,100 kg
Gross powernot on its sheet35.5 kW (47.6 HP)37.1 kW (49.7 hp)not on its sheet
Max digging depth3.8 m3.865 m3.478 m3.42 m
Max reach at ground level5.98 m6.11 m5.889 m5.88 m
Max dumping height4.13 m4.18 m3.915 m3.805 m
Bucket capacity0.2 m³not on its sheetnot on its sheet0.15 m³
Fuel tank120 L75 L72 L78 L
Top speed4.1 km/h4.9 km/h4.5 km/h4 km/h
Tail swing radius1.65 m1.27 mnot on its sheet0.98 m
Every figureFull sheetKomatsu PC56-7 vs Kubota KX057-4

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Komatsu PC56-7 if you need a bigger bucket (0.2 m³) and a bigger fuel tank (120 L).
  • Pick the Kubota KX057-4 if you need a deeper dig (3.865 m), longer reach (6.11 m) and a higher dump (4.18 m).
  • Pick the Bobcat E50 if you need more gross power (37.1 kW).
  • Pick the SANY SY50U if you need a tighter turn (0.98 m).

Komatsu PC56-7 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

No Komatsu PC56-7 is listed in the UAE on EquipmentsFinder right now. The prices below are for all mini excavators, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 28

AED 1,225 /day

No priced Komatsu PC56-7 for hire yet: this is all mini excavators

Low AED 800High AED 1,800

No Komatsu PC56-7 for rent listed right now.

Request a Komatsu PC56-7

Who is asking for mini excavators in the UAE

Contractors posted 48 requests for mini excavators on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (28), Abu Dhabi (11) and Fujairah (3). Requests name a kind of machine, not a model, so this counts every mini excavator, the Komatsu PC56-7 among them.

Requests, last 12 months
48
For Dubai
28
For Abu Dhabi
11
  • 20 Ton Wheel Excavator Required For Purchase19 November 2026
  • 20 ton Tracked excavator pre-fitted with hydraulic vibratory roller Required For RentAbu Dhabi / 17 November 2026
  • 85 Ton Excavator with 26m Boom Required For RentDubai / 16 November 2026

Open mini excavator requests on the Inquiry BoardPost a request for a Komatsu PC56-7

Does a Komatsu PC56-7 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Komatsu PC56-7 is 2.55 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
5.94 m
Width
1.96 m
Height
2.55 m
Weight
5.3 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Komatsu PC56-7

For the people who run one: codes, charts and calculators that fit a mini excavator.

Same class: 5 ton mini excavators

5 ton mini excavators with an operating weight of 5 to 6 t, lightest first. The Komatsu PC56-7 is 3 of 8; every figure is the maker's.

  1. 1SANY SY50U5.1 t
  2. 2Bobcat E505.15 t
  3. 3Komatsu PC56-7This page5.3 t
  4. 4Bobcat E605.59 t
  5. 5Kubota KX057-45.6 t
  6. 6Kubota U55-55.65 t
  7. 7Cat 305 CR5.7 t
  8. 8Takeuchi TB2605.85 t

Popular Komatsu mini excavator models

Komatsu PC56-7 fault codes and serial number

All Komatsu fault codesFind the year from a Komatsu serial number

More Komatsu PC56-7 questions

What size bucket does a Komatsu PC56-7 take?

0.2 m³ (0.26 yd³) is the bucket the maker quotes its figures with; other sizes fit.

How far can a Komatsu PC56-7 reach?

Its maximum reach at ground level is 5.98 m (19 ft 7 in).

How tall is a Komatsu PC56-7?

2.55 m (8 ft 4 in) overall.

How wide is a Komatsu PC56-7?

1.96 m (6 ft 5 in) overall.

How high can a Komatsu PC56-7 dig?

Its maximum digging height is 5.86 m (19 ft 3 in).

What is the tail swing radius of a Komatsu PC56-7?

1.65 m (5 ft 5 in).

What is the hydraulic flow of a Komatsu PC56-7?

51 x 2 + 32 + 12 lpm.

What is the bucket digging force of a Komatsu PC56-7?

39 kN (8,768 lbf).

What are the Komatsu PC56-7's main competitors?

The machines nearest it in size are the Bobcat E50, the SANY SY50U and the Bobcat E60. Each has a side-by-side comparison on EquipmentsFinder.

Is the Komatsu PC56-7 sold in the UAE?

Yes. The Komatsu PC56-7 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Komatsu PC56-7 used for?

A mini excavator: a compact tracked digger, light enough to trailer and narrow enough for gardens, basements and utility work between buildings. Typical jobs: trenching for services, landscaping and garden work, footings and foundations, demolition in tight spaces.

Embed this spec card

The Komatsu PC56-7's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/komatsu-pc56" title="Komatsu PC56-7 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/komatsu-pc56">Komatsu PC56-7 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Komatsu PC56-7 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.