Komatsu PC56-7
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Komatsu · mini excavator

Komatsu PC56-7

Komatsu PC56-7 (5.3 t conventional-tail-swing mini excavator, Komatsu S4D87E-1 engine, 400 mm shoes, 0.20 m3 standard bucket) as introduced in Komatsu's 2008 Technical Report No. 161. The maker publishes no downloadable PC56-7 brochure or dimension drawing, so the dimension rows are numbered 1-9 here rather than lettered, and most figures beyond the maker's report come from Chinese spec portals that print the Komatsu spec table.

UAEGlobal

digging depth
3.8 m
Operating weight
5,300 kg
Bucket capacity
0.2 m³
Komatsu PC56-7, side view with dimensions (illustration)2.55 m1.98 m5.94 m
Komatsu PC56-7, front view (illustration)1.96 m

Weight

Operating weight (Maker's machine mass, Table 1; one dealer lists 5,690 kg for later Tier 4 builds)
5,300 kg
Ground pressure (Also printed by https://product.d1cm.com/komatsu001/106441/)
30.7 kPa

Performance

Bucket capacity (Standard bucket; bucket range 0.055-0.22 m3 on https://product.d1cm.com/komatsu001/106441/)
0.2 m³
Max digging depth (3.81 m on https://www.tiebaobei.com/canshu/1602304-55.html)
3.8 m
Max reach at ground level
5.98 m
Max digging reach (6.13 m on https://www.tiebaobei.com/canshu/1602304-55.html)
6.12 m
Max digging height (5.85 m on https://www.cehome.com/news/20091124/1835.shtml)
5.86 m
Max dumping height (4.16 m on https://www.cehome.com/news/20091124/1835.shtml)
4.13 m
Max vertical wall digging depth
3.06 m
Bucket digging force (Also 39 kN on https://www.cehome.com/news/20091124/1835.shtml)
39 kN
Arm digging force
24 kN
Swing speed
9.0 min-1
Travel speed (high) (Low 2.6 km/h; automatic two-speed shift)
4.1 km/h
Travel speed (low)
2.6 km/h
Gradeability
30°

Engine

Engine model
Komatsu S4D87E-1
Type
4-stroke, water-cooled, in-line, direct injection
Aspiration
Turbocharged
Emissions
Meets the Chinese national off-road emission regulation in force from October 2010
Cylinders
4
Bore x stroke
87 x 102.4 mm
Displacement
2.4 L
Rated power (At 2300 min-1; the report prints 'rated output' without naming a test standard. Komatsu Chinese page lists 47 PS (https://www.cehome.com/news/20091124/1835.shtml))
34.6 kW (46 HP)

Hydraulics

Main pumps
2 variable-displacement piston pumps, 2 gear pumps
Pump flow (Piston pumps 2 x 51 L/min, gear pumps 32 and 12 L/min)
51 x 2 + 32 + 12 lpm
Max pressure (26.5 MPa, work equipment and travel circuits)
265 bar
Swing circuit pressure (19.6 MPa)
196 bar
Pilot circuit pressure (3.7 MPa)
37 bar
Travel motors
2 variable-displacement piston motors
Swing motor
1 fixed-displacement piston motor
Boom cylinder bore (1 cylinder; stroke 686 mm (https://product.d1cm.com/komatsu001/106441/) or 689.5 mm (https://www.tiebaobei.com/canshu/1602304-55.html))
90 mm
Arm cylinder bore (1 cylinder; stroke 709 mm (https://product.d1cm.com/komatsu001/106441/) or 709.5 mm (https://www.tiebaobei.com/canshu/1602304-55.html))
85 mm
Bucket cylinder bore (1 cylinder; stroke 580 mm)
75 mm

Undercarriage

Track shoes
Steel shoes, 400 mm wide
Track rollers (each side) (Increased from 4 on the PC55MR-2; inboard-type carrier roller and enlarged shoe guard)
5

Blade

Blade height (D1CM labels 355 mm as blade height (beside an implausible 700 mm width); Tiebaobei labels 355 mm as blade lift/drop, and D1CM gives lift/drop as 430 / 330 mm, so the figure is uncertain)
0.355 m

Service capacities

Fuel tank
120 L
Cooling system (Coolant; from tiebaobei.com spec table)
8 L