Specification sheetIssued 20 November 2026
Komatsu · mini excavator
Komatsu PC56-7
Komatsu PC56-7 (5.3 t conventional-tail-swing mini excavator, Komatsu S4D87E-1 engine, 400 mm shoes, 0.20 m3 standard bucket) as introduced in Komatsu's 2008 Technical Report No. 161. The maker publishes no downloadable PC56-7 brochure or dimension drawing, so the dimension rows are numbered 1-9 here rather than lettered, and most figures beyond the maker's report come from Chinese spec portals that print the Komatsu spec table.
UAEGlobal
- digging depth
- 12 ft 6 in
- Operating weight
- 11,684 lb
- Bucket capacity
- 0.26 yd³
8.4 ft6.5 ft19.5 ft
6.4 ftWeight
- Operating weight (Maker's machine mass, Table 1; one dealer lists 5,690 kg for later Tier 4 builds)
- 11,684 lb
- Ground pressure (Also printed by https://product.d1cm.com/komatsu001/106441/)
- 30.7 kPa
Performance
- Bucket capacity (Standard bucket; bucket range 0.055-0.22 m3 on https://product.d1cm.com/komatsu001/106441/)
- 0.26 yd³
- Max digging depth (3.81 m on https://www.tiebaobei.com/canshu/1602304-55.html)
- 12 ft 6 in
- Max reach at ground level
- 19 ft 7 in
- Max digging reach (6.13 m on https://www.tiebaobei.com/canshu/1602304-55.html)
- 20 ft 1 in
- Max digging height (5.85 m on https://www.cehome.com/news/20091124/1835.shtml)
- 19 ft 3 in
- Max dumping height (4.16 m on https://www.cehome.com/news/20091124/1835.shtml)
- 13 ft 7 in
- Max vertical wall digging depth
- 10 ft 0 in
- Bucket digging force (Also 39 kN on https://www.cehome.com/news/20091124/1835.shtml)
- 8,768 lbf
- Arm digging force
- 5,395 lbf
- Swing speed
- 9.0 min-1
- Travel speed (high) (Low 2.6 km/h; automatic two-speed shift)
- 2.5 mph
- Travel speed (low)
- 1.6 mph
- Gradeability
- 30°
Engine
- Engine model
- Komatsu S4D87E-1
- Type
- 4-stroke, water-cooled, in-line, direct injection
- Aspiration
- Turbocharged
- Emissions
- Meets the Chinese national off-road emission regulation in force from October 2010
- Cylinders
- 4
- Bore x stroke
- 87 x 102.4 mm
- Displacement
- 148.5 cu in
- Rated power (At 2300 min-1; the report prints 'rated output' without naming a test standard. Komatsu Chinese page lists 47 PS (https://www.cehome.com/news/20091124/1835.shtml))
- 46 HP
Hydraulics
- Main pumps
- 2 variable-displacement piston pumps, 2 gear pumps
- Pump flow (Piston pumps 2 x 51 L/min, gear pumps 32 and 12 L/min)
- 51 x 2 + 32 + 12 lpm
- Max pressure (26.5 MPa, work equipment and travel circuits)
- 3,844 psi
- Swing circuit pressure (19.6 MPa)
- 2,843 psi
- Pilot circuit pressure (3.7 MPa)
- 537 psi
- Travel motors
- 2 variable-displacement piston motors
- Swing motor
- 1 fixed-displacement piston motor
- Boom cylinder bore (1 cylinder; stroke 686 mm (https://product.d1cm.com/komatsu001/106441/) or 689.5 mm (https://www.tiebaobei.com/canshu/1602304-55.html))
- 0.3 ft
- Arm cylinder bore (1 cylinder; stroke 709 mm (https://product.d1cm.com/komatsu001/106441/) or 709.5 mm (https://www.tiebaobei.com/canshu/1602304-55.html))
- 0.3 ft
- Bucket cylinder bore (1 cylinder; stroke 580 mm)
- 0.2 ft
Undercarriage
- Track shoes
- Steel shoes, 400 mm wide
- Track rollers (each side) (Increased from 4 on the PC55MR-2; inboard-type carrier roller and enlarged shoe guard)
- 5
Blade
- Blade height (D1CM labels 355 mm as blade height (beside an implausible 700 mm width); Tiebaobei labels 355 mm as blade lift/drop, and D1CM gives lift/drop as 430 / 330 mm, so the figure is uncertain)
- 1.2 ft
Service capacities
- Fuel tank
- 31.7 US gal
- Cooling system (Coolant; from tiebaobei.com spec table)
- 2.1 US gal