EF Logo

mini excavatormade by KomatsuUAE, Global

Komatsu PC70-8Specs, weight and dimensions

Weight
6.59 t
6,590 kg
Dig depth
4.1 m
13.5 ft
Bucket
0.3 m³
0.39 yd³

Quick answer

The Komatsu PC70-8 is a 6.59-tonne mini excavator with a Komatsu SAA4D95LE-5 engine rated at 48.5 kW (65 HP). Its dig depth is 4.1 m and its bucket is 0.3 m³. It suits trenching for services, landscaping and garden work and footings and foundations. People compare it with the Kubota KX080-4 (8.44 t) and the SANY SY75C (7.28 t).

Komatsu PC70-8 (illustration)

How much does a Komatsu PC70-8 weigh?

The Komatsu PC70-8 weighs 6.59 tonnes (6,590 kg, 14,528 lb) in working order, with fuel, operator and standard attachment. That is 22% lighter than the Kubota KX080-4 (8.44 t) and 9% lighter than the SANY SY75C (7.28 t). It puts 28.4 kPa (0.29 kg/cm2) of pressure on the ground. The figures are from Komatsu PC70-8 brochure CEN00471-04 (Komatsu Asia, 2018; distributor-hosted copy).

What engine is in the Komatsu PC70-8?

The Komatsu PC70-8 has a Komatsu SAA4D95LE-5 engine rated at 48.5 kW (65 HP) net, ISO 9249 / SAE J1349, at 1950 min-1. It displaces 3.3 L. Emissions: U.S. EPA Tier 3 and EU Stage 3A equivalent. The fuel tank holds 130 L (34.3 US gal) and the engine takes 11.5 L (3 US gal) of oil.

How deep can a Komatsu PC70-8 dig?

The Komatsu PC70-8's max digging depth is 4.1 m. In imperial units the digging depth is 13.5 ft. On the same row of their sheets, the Kubota KX080-4 shows 4.6 m and the SANY SY75C shows 4.45 m. The figures are from Komatsu PC70-8 brochure CEN00471-04 (Komatsu Asia, 2018; distributor-hosted copy).

What are the Komatsu PC70-8 dimensions?

The Komatsu PC70-8 is 6.08 m (19 ft 11 in) long, 2.23 m (7 ft 4 in) wide and 2.64 m (8 ft 8 in) high. As it stands it is too big for the door of a standard shipping container. The Kubota KX080-4 is 6.45 m long, 2.20 m wide and 2.54 m high.

Komatsu PC70-8 vs Kubota KX080-4: what is the difference?

The Komatsu PC70-8 is 22% lighter than the Kubota KX080-4: 6.59 t against 8.44 t. The Komatsu PC70-8 has more gross power (50.7 kW against 49.7 kW) and carries more fuel (130 L against 115 L). The Kubota KX080-4 digs deeper (4.6 m against 4.1 m), reaches further (7.33 m against 6.36 m) and dumps higher (5.25 m against 5.015 m).

Komatsu PC70-8 vs Kubota KX080-4, every figure

Komatsu PC70-8 dimensions

Komatsu PC70-8, side view with dimensions (illustration)2.64 m2.13 m6.08 m
Side view
Komatsu PC70-8, front view (illustration)2.23 m
Front view
Overall height
2.64 m
Track on ground
2.13 m
Overall length
6.08 m
Overall width
2.23 m

Illustration; figures from the maker's sheet.

How big is the Komatsu PC70-8?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Komatsu PC70-8 drawn to scale beside a person and a pickup truck. The Komatsu PC70-8 is 6.08 m long - about 1.1 pickup trucks - and 2.64 m tall, 1.5 times a person's height.Komatsu PC70-86.08 × 2.64 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Komatsu PC70-8 is 6.08 m long - about 1.1 pickup trucks - and 2.64 m tall, 1.5 times a person's height.

Komatsu PC70-8 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

75 figures in 8 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length6.08 m[1] p.16
Length on ground (transport)3.655 m[1] p.16
Overall height (to top of boom)2.5 m[1] p.16
Overall width2.225 m[1] p.16
Overall height (to top of cab)2.64 m[1] p.16
Ground clearance, counterweight0.75 m[1] p.16
Ground clearance (minimum)0.35 m[1] p.16
Tail swing radius1.75 m[1] p.16
Track length on ground2.13 m[1] p.16
Dimensions, part 2 of 2
FigureValue (metric)Source
Track length2.765 m[1] p.16
Track gauge1.7 m[1] p.16
Width of crawler2.15 m[1] p.16
Shoe width0.45 m[1] p.16
Grouser height0.02 m[1] p.16
Machine cab height1.865 m[1] p.16
Machine cab width2.19 m[1] p.16
Swing centre to rear end1.75 m[1] p.16

Working range

Working range, part 1 of 2
FigureValue (metric)Source
Max digging height7.15 m[1] p.16
Max dumping height5.015 m[1] p.16
Max digging depth4.1 m[1] p.16
Max vertical wall digging depth3.505 m[1] p.16
Working range, part 2 of 2
FigureValue (metric)Source
Max digging reach6.36 m[1] p.16
Max reach at ground level6.22 m[1] p.16
Min swing radius1.75 m[1] p.16
Stick length1.65 mStandard arm (lifting-capacity tables)[1] p.17

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Operating weight6,590 kgWithout blade, 450 mm steel shoes, 0.30 m3 ISO 7451 heaped bucket, 1650 mm arm, with operator, full fuel tank and rated fluids[1] p.15
Operating weight (blade)7,190 kgBlade specification[1] p.12
Weight, part 2 of 2
FigureValue (metric)Source
Operating weight (heavy-duty)6,705 kgHeavy-duty specification: reinforced arm and 0.37 m3 heavy-duty bucket[1] p.12
Ground pressure28.4 kPa (0.29 kg/cm2)450 mm steel shoes[1] p.15

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Bucket capacity0.3 m³Standard bucket, ISO 7451 heaped; 0.37 m3 buckets also listed (p.11)[1] p.16
Bucket digging force55 kNSAE J1179 rating; 5590 kg[1] p.16
Arm digging force38 kNSAE J1179 crowd force; 3900 kg[1] p.16
Swing speed11 min-1[1] p.15
Performance, part 2 of 2
FigureValue (metric)Source
Travel speed (high)4.5 km/h[1] p.15
Travel speed (low)2.8 km/h[1] p.15
Max drawbar pull56 kN5750 kg[1] p.15
Max lift capacity3,740 kgOver front at 2.0 m reach, 1.0 m below ground; hydraulic-limited rating; 1650 mm arm, 0.30 m3 bucket, without blade[1] p.17

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelKomatsu SAA4D95LE-5[1] p.15
TypeWater-cooled, 4-cycle, direct injection[1] p.15
AspirationTurbocharged, air-to-air aftercooled[1] p.15
EmissionsU.S. EPA Tier 3 and EU Stage 3A equivalent[1] p.15
Cylinders4[1] p.15
Bore x stroke95 x 115 mm[1] p.15
Engine, part 2 of 2
FigureValue (metric)Source
Displacement3.3 L[1] p.15
Gross power50.7 kW (68 HP)SAE J1995, at 1950 min-1[1] p.15
Net power48.5 kW (65 HP)ISO 9249 / SAE J1349, at 1950 min-1[1] p.15
Fan driveMechanical[1] p.15
GovernorAll-speed control, electronic[1] p.15

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
SystemClosed-centre load-sensing (CLSS) with pressure-compensated valves[1] p.15
Main pumpVariable displacement axial piston[1] p.15
Pump flow172 L/min[1] p.15
Implement circuit pressure24.5 MPa (250 kg/cm2)Relief valve setting[1] p.15
Travel circuit pressure24.5 MPa (250 kg/cm2)Relief valve setting[1] p.15
Swing circuit pressure21.1 MPa (215 kg/cm2)Relief valve setting[1] p.15
Hydraulics, part 2 of 2
FigureValue (metric)Source
Pilot circuit pressure3.1 MPa (32 kg/cm2)Relief valve setting[1] p.15
Travel motorsVariable displacement axial piston[1] p.15
Swing motorFixed displacement axial piston[1] p.15
Boom cylinder1 - 115 mm bore x 840 mm stroke x 65 mm rod[1] p.15
Arm cylinder1 - 100 mm bore x 865 mm stroke x 60 mm rod[1] p.15
Bucket cylinder1 - 90 mm bore x 710 mm stroke x 55 mm rod[1] p.15

Undercarriage

Undercarriage, part 1 of 2
FigureValue (metric)Source
Track frameBox-section[1] p.15
Track shoesTriple grouser[1] p.15
Track adjusterHydraulic[1] p.15
Track shoes (each side)38[1] p.15
Track rollers (each side)5[1] p.15
Carrier rollers (each side)1[1] p.15
Undercarriage, part 2 of 2
FigureValue (metric)Source
Swing reductionPlanetary gear[1] p.15
Swing circle lubricationGrease-bathed[1] p.15
Service brakeHydraulic lock[1] p.15
Parking brakeHydraulic release lock[1] p.15
Steering controlTwo levers with pedals[1] p.15

Blade

Blade, part 1 of 2
FigureValue (metric)Source
Blade width2.26 mBlade specification[1] p.12
Blade height0.47 mBlade specification[1] p.12
Blade, part 2 of 2
FigureValue (metric)Source
Max blade lift above ground0.41 mBlade specification[1] p.12
Max blade drop below ground0.27 mBlade specification[1] p.12

Build: Komatsu PC70-8 compact hydraulic excavator (Komatsu SAA4D95LE-5, EPA Tier 3 / EU Stage 3A equivalent), standard specification without blade, 1650 mm arm, 450 mm steel shoes, from Komatsu brochure CEN00471-04 (Jan 2018, Komatsu Asia). The copy used is hosted by Komatsu distributor Dimo Bangladesh; no Komatsu Middle East PC70-8 sheet was found.

  1. [1]Komatsu PC70-8 brochure CEN00471-04 (Komatsu Asia, 2018; distributor-hosted copy)

Komatsu PC70-8 service

What each system holds and when Komatsu says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
130 L34.3 US gal
Cooling system
10 L2.6 US gal
Engine oil
11.5 L3 US gal
Final drive, each side
1.1 L0.3 US gal
Hydraulic tank
61 L16.1 US gal

Service intervals

Engine oil and filter
500 hours
Hydraulic oil
5,000 hours
Hydraulic oil filter
1,000 hours

Komatsu PC70-8 against its rivals

The mini excavators nearest in weight from other makers, figure by figure, each shown at the same scale.

Komatsu PC70-8, Kubota KX080-4, SANY SY75C, John Deere 60 P-Tier: specifications side by side
FigureKomatsu PC70-8this pageKubota KX080-4 specsSANY SY75C specsJohn Deere 60 P-Tier specs
Operating weight6,590 kg8,435 kg7,280 kg6,180 kg
Gross power50.7 kW (68 HP)49.7 kW (66.6 HP)42.4 kW (56.9 hp)not on its sheet
Max digging depth4.1 m4.6 m4.45 m3.77 m
Max digging reach6.36 m7.33 mnot on its sheet6.23 m
Max dumping height5.015 m5.25 m5.49 m4.17 m
Bucket capacity0.3 m³not on its sheet0.28 m³0.19 m³
Pump flow172 L/minnot on its sheet90 L/min144 L/min
Fuel tank130 L115 L150 L120 L
Top speed4.5 km/h4.8 km/h4.2 km/h4.8 km/h
Every figureFull sheetKomatsu PC70-8 vs Kubota KX080-4

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Komatsu PC70-8 if you need more gross power (50.7 kW), a bigger bucket (0.3 m³) and more hydraulic flow (172 L/min).
  • Pick the Kubota KX080-4 if you need a deeper dig (4.6 m) and longer reach (7.33 m).
  • Pick the SANY SY75C if you need a higher dump (5.49 m) and a bigger fuel tank (150 L).
  • Pick the John Deere 60 P-Tier if the lightest machine matters: at 6.18 t it weighs the least of the 4, and it leads no other figure here.

Komatsu PC70-8 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

No Komatsu PC70-8 is listed in the UAE on EquipmentsFinder right now. The prices below are for all mini excavators, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 28

AED 1,225 /day

No priced Komatsu PC70-8 for hire yet: this is all mini excavators

Low AED 800High AED 1,800

No Komatsu PC70-8 for rent listed right now.

Request a Komatsu PC70-8

Who is asking for mini excavators in the UAE

Contractors posted 48 requests for mini excavators on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (28), Abu Dhabi (11) and Fujairah (3). Requests name a kind of machine, not a model, so this counts every mini excavator, the Komatsu PC70-8 among them.

Requests, last 12 months
48
For Dubai
28
For Abu Dhabi
11
  • 20 Ton Wheel Excavator Required For Purchase19 November 2026
  • 20 ton Tracked excavator pre-fitted with hydraulic vibratory roller Required For RentAbu Dhabi / 17 November 2026
  • 85 Ton Excavator with 26m Boom Required For RentDubai / 16 November 2026

Open mini excavator requests on the Inquiry BoardPost a request for a Komatsu PC70-8

Does a Komatsu PC70-8 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Komatsu PC70-8 is 2.64 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
6.08 m
Width
2.23 m
Height
2.64 m
Weight
6.6 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Komatsu PC70-8

For the people who run one: codes, charts and calculators that fit a mini excavator.

Ranked: Mini excavators by dig depth

By maximum dig depth, deepest-digging first. The Komatsu PC70-8 is 7 of 25; every figure is the maker's.

  1. 3Takeuchi TB2904.58 m
  2. 4SANY SY75C4.45 m
  3. 5Cat 308 CR4.11 m
  4. 6Cat 307.54.11 m
  5. 7Komatsu PC70-8This page4.1 m
  6. 8Bobcat E603.98 m
  7. 9Takeuchi TB2603.9 m
  8. 10Kubota KX057-43.87 m
  9. 11Komatsu PC56-73.8 m

Showing 3 to 11 of 25, the machines nearest the Komatsu PC70-8 by maximum dig depth.

Popular Komatsu mini excavator models

Komatsu PC70-8 fault codes and serial number

All Komatsu fault codesFind the year from a Komatsu serial number

More Komatsu PC70-8 questions

How much horsepower does the Komatsu PC70-8 have?

65 hp (48.5 kW) net, ISO 9249 / SAE J1349, at 1950 min-1.

What size bucket does a Komatsu PC70-8 take?

0.3 m³ (0.39 yd³) is the bucket the maker quotes its figures with; other sizes fit.

How far can a Komatsu PC70-8 reach?

Its maximum reach at ground level is 6.22 m (20.4 ft).

How tall is a Komatsu PC70-8?

2.64 m (8 ft 8 in) overall.

How wide is a Komatsu PC70-8?

2.23 m (7 ft 4 in) overall.

How high can a Komatsu PC70-8 dig?

Its maximum digging height is 7.15 m (23.5 ft).

What is the tail swing radius of a Komatsu PC70-8?

1.75 m (5.7 ft).

What is the hydraulic flow of a Komatsu PC70-8?

172 L/min (45.4 US gpm).

What are the Komatsu PC70-8's main competitors?

The machines nearest it in size are the John Deere 60 P-Tier, the SANY SY75C and the Cat 306 CR. Each has a side-by-side comparison on EquipmentsFinder.

Is the Komatsu PC70-8 sold in the UAE?

Yes. The Komatsu PC70-8 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Komatsu PC70-8 used for?

A mini excavator: a compact tracked digger, light enough to trailer and narrow enough for gardens, basements and utility work between buildings. Typical jobs: trenching for services, landscaping and garden work, footings and foundations, demolition in tight spaces.

Embed this spec card

The Komatsu PC70-8's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/komatsu-pc70" title="Komatsu PC70-8 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/komatsu-pc70">Komatsu PC70-8 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Komatsu PC70-8 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.