Komatsu PC70-8
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Komatsu · mini excavator

Komatsu PC70-8

Komatsu PC70-8 compact hydraulic excavator (Komatsu SAA4D95LE-5, EPA Tier 3 / EU Stage 3A equivalent), standard specification without blade, 1650 mm arm, 450 mm steel shoes, from Komatsu brochure CEN00471-04 (Jan 2018, Komatsu Asia). The copy used is hosted by Komatsu distributor Dimo Bangladesh; no Komatsu Middle East PC70-8 sheet was found.

UAEGlobal

digging depth
4.1 m
power
48.5 kW (65 HP)
Operating weight
6,590 kg
Bucket capacity
0.3 m³
Komatsu PC70-8, side view with dimensions (illustration)2.64 m2.13 m6.08 m
Komatsu PC70-8, front view (illustration)2.23 m

Working range

AMax digging height
7.15 m
BMax dumping height
5.015 m
CMax digging depth
4.1 m
DMax vertical wall digging depth
3.505 m
EMax digging reach
6.36 m
FMax reach at ground level
6.22 m
GMin swing radius
1.75 m
Stick length (Standard arm (lifting-capacity tables))
1.65 m

Weight

Operating weight (Without blade, 450 mm steel shoes, 0.30 m3 ISO 7451 heaped bucket, 1650 mm arm, with operator, full fuel tank and rated fluids)
6,590 kg
Operating weight (blade) (Blade specification)
7,190 kg
Operating weight (heavy-duty) (Heavy-duty specification: reinforced arm and 0.37 m3 heavy-duty bucket)
6,705 kg
Ground pressure (450 mm steel shoes)
28.4 kPa (0.29 kg/cm2)

Performance

Bucket capacity (Standard bucket, ISO 7451 heaped; 0.37 m3 buckets also listed (p.11))
0.3 m³
Bucket digging force (SAE J1179 rating; 5590 kg)
55 kN
Arm digging force (SAE J1179 crowd force; 3900 kg)
38 kN
Swing speed
11 min-1
Travel speed (high)
4.5 km/h
Travel speed (low)
2.8 km/h
Max drawbar pull (5750 kg)
56 kN
Max lift capacity (Over front at 2.0 m reach, 1.0 m below ground; hydraulic-limited rating; 1650 mm arm, 0.30 m3 bucket, without blade)
3,740 kg

Engine

Engine model
Komatsu SAA4D95LE-5
Type
Water-cooled, 4-cycle, direct injection
Aspiration
Turbocharged, air-to-air aftercooled
Emissions
U.S. EPA Tier 3 and EU Stage 3A equivalent
Cylinders
4
Bore x stroke
95 x 115 mm
Displacement
3.3 L
Gross power (SAE J1995, at 1950 min-1)
50.7 kW (68 HP)
Net power (ISO 9249 / SAE J1349, at 1950 min-1)
48.5 kW (65 HP)
Fan drive
Mechanical
Governor
All-speed control, electronic

Hydraulics

System
Closed-centre load-sensing (CLSS) with pressure-compensated valves
Main pump
Variable displacement axial piston
Pump flow
172 L/min
Implement circuit pressure (Relief valve setting)
24.5 MPa (250 kg/cm2)
Travel circuit pressure (Relief valve setting)
24.5 MPa (250 kg/cm2)
Swing circuit pressure (Relief valve setting)
21.1 MPa (215 kg/cm2)
Pilot circuit pressure (Relief valve setting)
3.1 MPa (32 kg/cm2)
Travel motors
Variable displacement axial piston
Swing motor
Fixed displacement axial piston
Boom cylinder
1 - 115 mm bore x 840 mm stroke x 65 mm rod
Arm cylinder
1 - 100 mm bore x 865 mm stroke x 60 mm rod
Bucket cylinder
1 - 90 mm bore x 710 mm stroke x 55 mm rod

Undercarriage

Track frame
Box-section
Track shoes
Triple grouser
Track adjuster
Hydraulic
Track shoes (each side)
38
Track rollers (each side)
5
Carrier rollers (each side)
1
Swing reduction
Planetary gear
Swing circle lubrication
Grease-bathed
Service brake
Hydraulic lock
Parking brake
Hydraulic release lock
Steering control
Two levers with pedals

Blade

Blade width (Blade specification)
2.26 m
Blade height (Blade specification)
0.47 m
Max blade lift above ground (Blade specification)
0.41 m
Max blade drop below ground (Blade specification)
0.27 m

Service capacities

Fuel tank
130 L
Cooling system (Coolant)
10 L
Engine oil (Refill capacity)
11.5 L
Final drive, each side
1.1 L
Hydraulic tank
61 L

Service intervals

Engine oil and filter
500 hours
Hydraulic oil
5,000 hours
Hydraulic oil filter
1,000 hours