Volvo/Mack · MID 128 engine ECU - air, turbo, EGR and brake
Volvo/Mack Fault Code MID 128 PSID 98 FMI 1
Turbocharger boost pressure too low
What does Volvo/Mack code MID 128 PSID 98 FMI 1 mean?
Boost pressure is lower than the ECM wants. Mack lists air leaks in turbocharger hoses, pipes or the charge air cooler and an EGR system fault. Urgency: check soon - the machine may derate or limit a function. Check first: smoke or pressure test the charge air system for leaks.
- MID 128
- Which control unit reports it
- PSID 98
- Maker component at fault
- FMI 1
- Data below normal, most severe
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Smoke or pressure test the charge air system for leaks
Then 3 more checksWhere to read it
Connect the Premium Tech Tool or a J1939/J1587 scan tool to the diagnostic socket and read the codes for every module, not only the engine.
Checks
0 of 4 done
Causes
- Air leak in turbo hoses, pipes, brackets or the charge air cooler
- EGR system fault, such as a valve stuck open
- VGT nozzle stuck open
- Exhaust leak before the turbo
How it failed
You'll notice: Engine derates and is slow to respond.
Real conditionRead from FMI 1: data below normal, most severe
The sensor reading is valid but outside the allowed range - the problem may be real.
- Meter test
- Check the real value with a separate gauge or thermometer before blaming the sensor.
- Good result
- If the gauge agrees with the display, fix the machine, not the sensor.
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Turbo boost pressure control
1 other code on this part is also real condition (MID 128 PSID 98 FMI 0). When they show together, start at the wiring and connector they share.
- MID 128 PSID 98 FMI 0Turbocharger boost pressure too highReal conditionCheck soon
- MID 128 PSID 98 FMI 1Turbocharger boost pressure too lowReal conditionCheck soon
Other Volvo/Mack codes: MID 128 engine ECU - air, turbo, EGR and brake
- MID 128 SID 27 FMI 2Variable geometry turbo actuator - no valid command received
- MID 128 SID 27 FMI 4Variable geometry turbo actuator shorted to ground
- MID 128 SID 27 FMI 7Variable geometry turbo actuator mechanical fault
- MID 128 SID 27 FMI 9Variable geometry turbo actuator data missing for 2 seconds
- MID 128 SID 27 FMI 13Variable geometry turbo actuator self-calibration failed
- MID 128 PPID 35 FMI 0EGR mass flow too high
- MID 128 PPID 35 FMI 1EGR mass flow too low
Related on Equipments Finder
Source
This source lists MID 128 PSID 98 FMI 1 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Mack MP7/MP8/MP10 engines (CHU, CXU, GU, TD) with the 2010-and-later MID 128 engine ECU; the same MID 128 numbers appear on Volvo D11/D13 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
