Volvo/Mack · MID 128 engine ECU - sensors and levels
Volvo/Mack Fault Code MID 128 PSID 109 FMI 7
Coolant thermostat stuck closed
What does Volvo/Mack code MID 128 PSID 109 FMI 7 mean?
The ECM sees coolant temperature behaviour that matches a thermostat stuck closed, so the engine runs hotter than it should. Urgency: check soon - the machine may derate or limit a function. Check first: watch coolant temperature and feel the upper hose as the engine warms up.
- MID 128
- Which control unit reports it
- PSID 109
- Maker component at fault
- FMI 7
- Mechanical system not responding
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Watch coolant temperature and feel the upper hose as the engine warms up
Then 3 more checksWhere to read it
Connect the Premium Tech Tool or a J1939/J1587 scan tool to the diagnostic socket and read the codes for every module, not only the engine.
Checks
0 of 4 done
Causes
- Thermostat stuck closed
- Coolant temperature sensor misreading
- Low coolant flow
How it failed
You'll notice: Possible poor drivability and overheating, with the MIL lit.
Part or controllerRead from FMI 7: mechanical system not responding
The controller reports a part, module or its software as faulty or not responding.
- Meter test
- Check power and ground at the module connector with the key on, then its fuses.
- Good result
- Battery voltage on power, under 0.2 V drop on ground. Then it needs the service tool.
When to stop
Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Coolant thermostat monitoring
1 other code on this part is also part or controller (MID 128 PSID 109 FMI 12). When they show together, start at the wiring and connector they share.
- MID 128 PSID 109 FMI 7Coolant thermostat stuck closedPart or controllerCheck soon
- MID 128 PSID 109 FMI 12Coolant thermostat leaking or stuck openPart or controllerCheck soon
Other Volvo/Mack codes: MID 128 engine ECU - sensors and levels
- MID 128 SID 33 FMI 3Fan clutch output shorted high - fan runs full speed
- MID 128 SID 33 FMI 4Fan clutch output shorted low
- MID 128 SID 33 FMI 5Fan clutch output circuit open
- MID 128 PID 98 FMI 1Engine oil level critically low
- MID 128 PID 98 FMI 4Engine oil level sensor shorted to ground
- MID 128 PID 98 FMI 5Engine oil level sensor circuit open
- MID 128 PID 100 FMI 1Engine oil pressure critically low
Related on Equipments Finder
Source
This source lists MID 128 PSID 109 FMI 7 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Mack MP7/MP8/MP10 engines (CHU, CXU, GU, TD) with the 2010-and-later MID 128 engine ECU; the same MID 128 numbers appear on Volvo D11/D13 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
