EF Logo

Thermo King · Engine protection (SR-2/SR-3/SR-4)

Thermo King Fault Code 37

Check engine coolant level

What does Thermo King code 37 mean?

The coolant level sensor or switch indicates the engine coolant is too low. Running low on coolant leads quickly to overheating. Urgency: stop now - shut down and fix before working on. Check first: check the coolant overflow bottle and radiator level when cold.

FaultStop37Thermo King · Engine protection (SR-2/SR-3/SR-4)

Can I keep running with it?

Stop now

Shut down and fix before working on. Running on risks damage or the machine locks out.

What should I check first?

Check the coolant overflow bottle and radiator level when cold

Then 3 more checks
Code shows hereFAULT37

Where this code shows

Press the alarm key or open the Alarms menu on the controller display to list active alarms.

Checks

0 of 4 done

Causes

  • Coolant leak at hose, radiator or water pump
  • Coolant not topped up after service
  • Level sensor fouled or failed

How it failed

You'll notice: Alarm 37 and the unit may shut down on the next high temperature; sometimes a leak or a steam smell can be seen.

Real conditionRead from how the source describes the code

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Engine coolant, oil, overspeed, fuel and ECU temperature sensors

Source

Thermo King Alarm Codes - North America (thermoking.com alarm code list)

This source lists 37 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Thermo King SR-2, SR-3, SR-4 truck and trailer units and related Thermo King controllers (the families the source lists).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.