EF Logo

Thermo King · Engine protection (SR-2/SR-3/SR-4)

Thermo King Fault Code 18

High engine coolant temperature

What does Thermo King code 18 mean?

Engine coolant went above the controller limit. If it keeps climbing the controller shuts the engine down to prevent damage. Urgency: stop now - shut down and fix before working on. Check first: let the engine cool, then check coolant level and look for leaks.

FaultStop18Thermo King · Engine protection (SR-2/SR-3/SR-4)

Can I keep running with it?

Stop now

Shut down and fix before working on. Running on risks damage or the machine locks out.

What should I check first?

Let the engine cool, then check coolant level and look for leaks

Then 4 more checks
Code shows hereFAULT18

Where this code shows

Press the alarm key or open the Alarms menu on the controller display to list active alarms.

Checks

0 of 5 done

Causes

  • Low coolant from a leak
  • Radiator or condenser airflow blocked
  • Fan belt loose or water pump worn
  • Thermostat stuck closed
1 more cause
  • Coolant sensor reading false high

How it failed

You'll notice: Alarm 18 shows and the engine may stop; the radiator may be hot, steaming, or the unit smell of coolant before shutdown.

OtherRead from how the source describes the code

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Engine coolant, oil, overspeed, fuel and ECU temperature sensors

Source

Thermo King Alarm Codes - North America (thermoking.com alarm code list)

This source lists 18 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Thermo King SR-2, SR-3, SR-4 truck and trailer units and related Thermo King controllers (the families the source lists).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.