Cummins · Cooling - SPN 110 FMI 15
Cummins Fault Code 2963
Engine coolant temperature high - least severe
What does Cummins code 2963 mean?
The coolant temperature has passed the first, lowest warning limit. The engine is still working normally but is warming up more than it should. Urgency: check soon - the machine may derate or limit a function. Check first: check the coolant level cold and top up with the correct coolant mixture if it is low.
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Check the coolant level cold and top up with the correct coolant mixture if it is low
Then 4 more checksWhere to read it
Connect INSITE or another J1939-capable scan tool to the 9-pin diagnostic port.
Checks
0 of 5 done
Causes
- Dirty radiator or air-conditioning condenser blocking airflow
- Fan clutch slipping
- Coolant level slightly low
- Thermostat slow to open
1 more causeFewer causes
- Heavy load in high ambient temperature
How it failed
You'll notice: An amber lamp, often only under heavy load or a hot day, and normally no power loss yet.
OtherRead from how the source describes the code
The source does not say how this one failed.
- Meter test
- Read the code with the service tool and note which other codes are active with it.
- Good result
- Codes that appear together usually share one cause - start with the wiring they share.
When to stop
Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Coolant temperature, oil temperature and oil pressure
- 415Engine oil pressure low - most severeLost messageStop now
- 421Engine oil temperature - above normal - moderately severeReal conditionCheck soon
- 425Engine oil temperature - data erratic or incorrectErratic or implausibleCheck soon
- 435Oil pressure sensor - data erraticErratic or implausibleCheck soon
- 2646Engine coolant temperature - condition existsOtherInformation
- 2659Engine coolant temperature - condition existsOtherInformation
- 2789Engine coolant temperature too lowReal conditionInformation
- 2963Engine coolant temperature high - least severeOtherCheck soon
- 3243Engine cooling system monitor - below normal - moderately severeReal conditionCheck soon
Show the other 11 codesHide the other codes
- 135Engine oil rifle pressure 1 sensor circuit - voltage high (shorted to a high source)Shorted highCheck soon
- 141Engine oil pressure sensor signal voltage lowShorted lowCheck soon
- 143Engine oil pressure low - moderately severeOtherCheck soon
- 144Engine coolant temperature sensor signal voltage highShorted highCheck soon
- 145Engine coolant temperature sensor signal voltage lowShorted lowCheck soon
- 146Engine coolant temperature high - moderately severeOtherCheck soon
- 151Engine coolant temperature high - most severeOtherStop now
- 212Engine oil temperature sensor 1 circuit - voltage high (shorted to a high source)Shorted highCheck soon
- 213Engine oil temperature sensor 1 circuit - voltage low (shorted to a low source)Shorted lowCheck soon
- 214Engine oil temperature too high - most severeLost messageStop now
- 334Coolant temperature - data erraticErratic or implausibleCheck soon
Related on Equipments Finder
Source
Cummins ISX15 (2013-2018) Fault Codes List (Diesel Repair)
This source lists 2963 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Cummins ISX15/X15/ISB6.7/B6.7/L9 engines (J1939 SPN 110, FMI 15); same code list used in trucks, buses and machines with these engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
