SANY SW940L specs
- bucket capacity
- 2.3 m³
- operating weight
- 14,600 kg
- static tipping load (full turn)
- 8,571 kg
SANY SW940L dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| 1 | Ground clearance | 0.407 m1.3 ft |
| 2 | Height to top of cab | 3.36 m11 ft |
| 3 | Height to beacon | 3.639 m11.9 ft |
| 4 | Rear axle to rear bumper | 2.036 m6.7 ft |
| 5 | Wheelbase | 3 m9.8 ft |
| 6 | Front axle to articulation pivot | 1.48 m4.9 ft |
| 7 | Overall length (without bucket) | 6.48 m21.3 ft |
| 8 | Overall length (bucket on ground) | 7.843 m25.7 ft |
| 9 | Max dump height | 5.296 m17.4 ft |
| 10 | Hinge pin height (max lift) | 3.837 m12.6 ft |
| 11 | Dump clearance at max lift | 2.688 m8.8 ft |
| 12 | Digging depth | 0.122 m0.4 ft |
| 13 | Reach at max lift | 1.21 m4 ft |
| 19 | Clearance circle (outside of tyres) | 5.389 m17.7 ft |
| 20 | Clearance circle (counterweight) | 5.483 m18 ft |
| 21 | Max. circle | 6.087 m20 ft |
| 23 | Bucket width | 2.545 m8.3 ft |
| 24 | Counterweight width | 2.1 m6.9 ft |
| 25 | Width over tyres | 2.476 m8.1 ft |
| 14 | Roll back at max lift | 62°62° |
| 15 | Dump angle at max lift | 44°44° |
| 16 | Roll back at carry height | 46°46° |
| 17 | Roll back at ground | 42°42° |
| 18 | Tail angle to rear wheel | 28°28° |
| 22 | Max steering angle | 40°40° |
SANY SW940L specifications
SANY SW940L wheel loader, Stage V / EPA Tier 4 Final build with Cummins B6.7, ZF 4WG190, 20.5R25 L3 radial tyres, 2.3 m³ JRB bucket, from SANY's 2026 flyer.
22 figures in 6 groups
Weight
- Operating weight
- 14,600 kg
Engine
- Engine model
- Cummins B6.7
- Emissions
- EPA Final Tier 4 / EU Stage V
- Cylinders
- 6
- Displacement
- 6.7 L
- Engine power
- 129 kW (173 hp)
- Max torque
- 1,120 Nm
Performance
- Bucket capacity
- 2.3 m³
- Breakout force
- 107 kN
- Static tipping load (straight)
- 10,145 kg
- Static tipping load (full turn)
- 8,571 kg
- Rated payload
- 4.2 t
- Top speed
- 25 mph (forward 4th); reverse 3rd 17 mphFlyer prints speeds in mph only
- Raise time
- 5.4 s
- Lower (float down) time
- 3.2 s
- Dump time
- 1.6 s
- Total cycle time
- 10.2 s
Hydraulics
- Pump flow
- 220 L/minMax flow
- Max pressure
- 250 bar
- Articulation angle
- 40°Each direction (+/- 40)
Transmission
- Transmission
- ZF 4WG190 countershaft powershift; automatic, manual and kick-down shift modes; 4 forward / 3 reverse
Tyres
- Tyres
- 20.5R25 L3 radial
Source: SANY SW940L Stage V flyer (4 pages, version 2025-12-30), SANY Group global site
SANY SW940L service
What each system holds and when SANY says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil
- 15 L
The 15-litre sump of the Cummins B6.7; check it at every start.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 236 L62.3 US gal
- Cooling system
- 31 L8.2 US gal
- Engine oil
- 15 L4 US gal
- Transmission
- 48 L12.7 US gal
- Axle oil, front
- 35 L9.2 US gal
- Axle oil, rear
- 35 L9.2 US gal
- Hydraulic tank
- 110 L29.1 US gal
- DEF/AdBlue tank
- 22 L5.8 US gal
Compare the SANY SW940L
The machines nearest in size, each drawn beside this one at the same scale.
Moving a SANY SW940L
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 7.84m
- Width
- 2.48m
- Height
- 3.36m
- Weight
- 14.6t
- RoadA beavertail or flatbed truck
- SeaA 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge
SANY SW940L prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 18
AED 1,150 /day
No priced SANY SW940L for hire yet: this is all wheel loaders
No SANY SW940L for rent listed right now.
Request a SANY SW940LAbout the SANY SW940L
The SANY SW940L is a 14.6-tonne wheel loader with a Cummins B6.7 engine.
It carries a 2.3 m³ bucket, has a full-turn tipping load of 8,571 kg and dumps with 2.688 m clearance.
For transport it measures 7.843 m long and 2.476 m wide, and its tank holds 236 L of fuel.
A wheel loader: a big bucket on two lift arms at the front of an articulated, wheeled machine that loads, carries and stockpiles material.
Typical jobs: loading trucks from stockpiles, moving sand, aggregate and soil around site, feeding crushers and batching plants, clearing and backfilling.
SANY SW940L questions
How much does a SANY SW940L weigh?
14,600 kg (32,187 lb) in working order, with fuel, operator and standard attachment.
What bucket size does the SANY SW940L have?
2.3 m³ (3.01 yd³), the bucket SANY quotes it with.
What is the SANY SW940L's tipping load?
8,571 kg (18,896 lb) at full turn: the safe load is about half of it.
What are the SANY SW940L's dimensions?
7.84 m long, 2.48 m wide and 3.36 m high, from SANY's dimension drawing.
How do you transport a SANY SW940L?
Road: a beavertail or flatbed truck. Sea: a 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge.
What is the SANY SW940L's fuel tank capacity?
236 L (62.3 US gal).
How much oil does a SANY SW940L take?
Engine oil: 15 L (4 US gal). Hydraulic oil: 110 L (29.1 US gal).
What are the SANY SW940L's main competitors?
The machines nearest it in size are the Volvo L90H, the Cat 938K, the Cat 930K. Each has a side-by-side comparison on EquipmentsFinder.
Is the SANY SW940L sold in the UAE?
Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.
What is a SANY SW940L used for?
A wheel loader: a big bucket on two lift arms at the front of an articulated, wheeled machine that loads, carries and stockpiles material. Typical jobs: loading trucks from stockpiles, moving sand, aggregate and soil around site, feeding crushers and batching plants, clearing and backfilling.
Need a SANY SW940L on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
