SANY SW940L

SANY SW940L wheel loader, Stage V / EPA Tier 4 Final build with Cummins B6.7, ZF 4WG190, 20.5R25 L3 radial tyres, 2.3 m³ JRB bucket, from SANY's 2026 flyer.

USAGlobal

Bucket capacity: 2.3 m³
Operating weight: 14,600 kg
Static tipping load (full turn): 8,571 kg

Side

Front

Ground clearance: 0.407 m
Height to top of cab: 3.36 m
Height to beacon: 3.639 m
Rear axle to rear bumper: 2.036 m
Wheelbase: 3 m
Front axle to articulation pivot: 1.48 m
Overall length (without bucket): 6.48 m
Overall length (bucket on ground): 7.843 m
Max dump height: 5.296 m
Hinge pin height (max lift): 3.837 m
Dump clearance at max lift: 2.688 m
Digging depth: 0.122 m
Reach at max lift: 1.21 m
Clearance circle (outside of tyres): 5.389 m
Clearance circle (counterweight): 5.483 m
Max. circle: 6.087 m
Bucket width: 2.545 m
Counterweight width: 2.1 m
Width over tyres: 2.476 m
Roll back at max lift: 62°
Dump angle at max lift: 44°
Roll back at carry height: 46°
Roll back at ground: 42°
Tail angle to rear wheel: 28°
Max steering angle: 40°

Weight

Operating weight: 14,600 kg

Engine

Engine model: Cummins B6.7
Emissions: EPA Final Tier 4 / EU Stage V
Cylinders: 6
Displacement: 6.7 L
Engine power: 129 kW (173 hp)
Max torque: 1,120 Nm

Performance

Bucket capacity: 2.3 m³
Breakout force: 107 kN
Static tipping load (straight): 10,145 kg
Static tipping load (full turn): 8,571 kg
Rated payload: 4.2 t
Top speed (Flyer prints speeds in mph only): 25 mph (forward 4th); reverse 3rd 17 mph
Raise time: 5.4 s
Lower (float down) time: 3.2 s
Dump time: 1.6 s
Total cycle time: 10.2 s

Hydraulics

Pump flow (Max flow): 220 L/min
Max pressure: 250 bar
Articulation angle (Each direction (+/- 40)): 40°

Transmission

Transmission: ZF 4WG190 countershaft powershift; automatic, manual and kick-down shift modes; 4 forward / 3 reverse

Tyres

Tyres: 20.5R25 L3 radial

Service capacities

Fuel tank: 236 L
Cooling system: 31 L
Engine oil: 15 L
Transmission: 48 L
Axle oil, front: 35 L
Axle oil, rear: 35 L
Hydraulic tank: 110 L
DEF/AdBlue tank: 22 L