Thermo King · Engine speed and starting (SR-2/SR-3/SR-4)
Thermo King Fault Code 44
Check fuel system
What does Thermo King code 44 mean?
The controller found an issue in the fuel system, usually the fuel solenoid or supply, that prevents steady engine running. Urgency: stop now - shut down and fix before working on. Check first: check fuel level and make sure the tank pickup is not drawing air or sludge.
Can I keep running with it?
Stop now
Shut down and fix before working on. Running on risks damage or the machine locks out.
What should I check first?
Check fuel level and make sure the tank pickup is not drawing air or sludge
Then 3 more checksWhere this code shows
Press the alarm key or open the Alarms menu on the controller display to list active alarms.
Checks
0 of 4 done
Causes
- Empty or low fuel tank
- Clogged fuel filter or air in lines
- Fuel solenoid failed
- Fuel pump not working
How it failed
You'll notice: Alarm 44; the engine stalls, surges or will not run, and fuel may not reach the pump.
OtherRead from how the source describes the code
The source does not say how this one failed.
- Meter test
- Read the code with the service tool and note which other codes are active with it.
- Good result
- Codes that appear together usually share one cause - start with the wiring they share.
When to stop
Most sensor and wiring faults can be traced with a multimeter and the wiring diagram. Disconnect the battery before unplugging controllers; if the controller itself is suspect or needs programming, that needs the dealer’s service tool.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Engine coolant, oil, overspeed, fuel and ECU temperature sensors
- 19Low engine oil pressureLost messageStop now
- 31Check oil pressure switchReal conditionCheck soon
- 37Check engine coolant levelReal conditionStop now
- 41Check engine coolant temperatureOtherCheck soon
- 44Check fuel systemOtherStop now
- 63Engine or vapor motor stoppedOtherStop now
- 66Low engine oil levelOtherCheck soon
- 83Low engine coolant temperatureLost messageInformation
- 96Low fuel levelOtherCheck soon
Show the other 14 codesHide the other codes
- 06Check coolant temperature sensorReal conditionCheck soon
- 18High engine coolant temperatureOtherStop now
- 98Check fuel level sensorOtherCheck soon
- 235High engine coolant temperature checkOtherInformation
- 254Auxiliary coolant temperature sensor checkOtherInformation
- 529Check fuel pump circuitOtherStop now
- 604Check coolant temperature sensor (engine ECU)OtherCheck soon
- 607Fuel temperature sensor checkOtherInformation
- 616Engine overspeedReal conditionStop now
- 804Engine coolant temperature sensor errorOtherInformation
- 807Fuel temperature sensor errorOtherInformation
- 834Water in fuel sensor errorOtherInformation
- 853Engine overspeed (no DTC)Real conditionCheck soon
- 854Engine protection self shutdownReal conditionStop now
Other Thermo King codes: Engine speed and starting (SR-2/SR-3/SR-4)
Source
Thermo King Alarm Codes - North America (thermoking.com alarm code list)
This source lists 44 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Thermo King SR-2, SR-3, SR-4 truck and trailer units and related Thermo King controllers (the families the source lists).
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
