EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 3226 Fault Code

Aftertreatment 1 outlet NOx

What does SPN 3226 mean?

Nitrogen oxide level in the exhaust leaving the SCR, measured by the downstream NOx sensor. The ECM uses it to check SCR performance and DEF dosing. How urgent it is depends on the FMI after SPN 3226 - pick it below. Check first: check the downstream sensor connector and lead along the tailpipe for corrosion and chafing.

FaultActiveSPN 3226FMI --J1939 engine ECU
SPN 3226
Aftertreatment 1 outlet NOx
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 3226 - pick it below.

What should I check first?

Check the downstream sensor connector and lead along the tailpipe for corrosion and chafing

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 3226?

You'll notice: The NOx sensor after the SCR is faulty or unreliable, so the ECM cannot confirm that the SCR is cutting NOx.

Find the number shown after SPN 3226 on your display. 6 of them have their own page with causes and checks.

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 3226 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Circuit fault at the downstream sensor plug near the tailpipe: road spray, corrosion or a chafed lead
  • Downstream NOx sensor failed, aged or coated with DEF residue or soot
  • Tailpipe or silencer joint leak near the sensor, pulling air into the sample
  • Sensor module supply, ground or CAN fault

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list names SPN 3226 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.