EF Logo

Cummins · Fuel system - SPN 157 FMI 18

Cummins Fault Code 559

Fuel rail pressure low - moderately severe

What does Cummins code 559 mean?

The rail pressure is below what the ECM requested. The engine loses power and may be hard to start. Urgency: check soon - the machine may derate or limit a function. Check first: check the fuel level and the fuel filter condition.

FaultCheck559Cummins · Fuel system - SPN 157 FMI 18

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Check the fuel level and the fuel filter condition

Then 5 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect INSITE or another J1939-capable scan tool to the 9-pin diagnostic port.

Checks

0 of 6 done

Causes

  • Fuel filter blocked
  • Air in the fuel or a suction leak
  • Fuel transfer pump weak
  • High pressure pump worn or leaking injector
1 more cause
  • Rail pressure sensor reading low

How it failed

You'll notice: Amber lamp, low power, hard starting and a possible misfire or stall.

OtherRead from how the source describes the code

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Common-rail fuel runs at very high pressure. Never open a high-pressure line or fitting with the engine running or just after it stops - a fine fuel jet can pierce skin.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Fuel rail pressure and fuel supply pump

Show the other 15 codes
All 24 Fuel rail pressure and fuel supply pump codes on one page

Source

Cummins ISX15 (2013-2018) Fault Codes List (Diesel Repair)

This source lists 559 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15/X15/ISB6.7/B6.7/L9 engines (J1939 SPN 157, FMI 18); same code list used in trucks, buses and machines with these engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.