EF Logo

Cummins · Cooling - SPN 110 FMI 15

Cummins Fault Code 2963

Engine coolant temperature high - least severe

What does Cummins code 2963 mean?

The coolant temperature has passed the first, lowest warning limit. The engine is still working normally but is warming up more than it should. Urgency: check soon - the machine may derate or limit a function. Check first: check the coolant level cold and top up with the correct coolant mixture if it is low.

FaultCheck2963Cummins · Cooling - SPN 110 FMI 15

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Check the coolant level cold and top up with the correct coolant mixture if it is low

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect INSITE or another J1939-capable scan tool to the 9-pin diagnostic port.

Checks

0 of 5 done

Causes

  • Dirty radiator or air-conditioning condenser blocking airflow
  • Fan clutch slipping
  • Coolant level slightly low
  • Thermostat slow to open
1 more cause
  • Heavy load in high ambient temperature

How it failed

You'll notice: An amber lamp, often only under heavy load or a hot day, and normally no power loss yet.

OtherRead from how the source describes the code

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Coolant temperature, oil temperature and oil pressure

Show the other 11 codes
All 20 Coolant temperature, oil temperature and oil pressure codes on one page

Source

Cummins ISX15 (2013-2018) Fault Codes List (Diesel Repair)

This source lists 2963 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15/X15/ISB6.7/B6.7/L9 engines (J1939 SPN 110, FMI 15); same code list used in trucks, buses and machines with these engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.